2011 TOYOTA CAMRY HYBRID Quick Reference Guide

67
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
OVERVIEW
Keyless entry
Push
PushONCE: Driver door
TWICE: All doors
Locking operation
Unlocking operation
Smart Key system
Start function
Accessories such as the radio will operate.
Power ON; the Hybrid System not running.
All systems OFF.
ACC
ON
OFF
NOTE:Gear shift lever must be in Park and brake pedal depressed.
Push Depress
brake pedalCarrying
Green indicator ON
Without depressing the brake pedal, pressing the “POWER” switch will
change the operation mode in succession from:
*Driver door unlocking function can be programmed to unlock driver door
only, or all doors. Grasping front passenger door handle will unlock all
doors.
NOTE:Doors may also be locked/unlocked using remote.
Power (without starting Hybrid System)
Trunk lid operation
Push and hold
Panic button
Push and hold
NOTE:If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
Back door lock/unlock
Push
Locking operationUnlocking operation
Carry remote to lockCarry remote to unlock
Push
Front door lock
Grasp
Carry remote
to lock/unlock
Front door unlock*
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 6

9
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
8
Hood release
Pull up latch and raise hood
Pull
Fuel tank door release and cap
Push*
Engine oil filler cap
Engine oil level dipstickWindshield washer fluid tank
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance.
Please refer to the “Warranty Maintenance Guide.”
Engine maintenance
Light controlInstrument panel
Brightness
control
+
Store
Turn
OVERVIEW
(1)
(3)
(5)(2)
(4)
NOTE:Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
NOTE: This is also the
trip meter reset button.
*It may take up to 10 seconds after
pushing button for the door to open
if the internal tank pressure is high.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 8

9
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
8
Hood release
Pull up latch and raise hood
Pull
Fuel tank door release and cap
Push*
Engine oil filler cap
Engine oil level dipstickWindshield washer fluid tank
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance.
Please refer to the “Warranty Maintenance Guide.”
Engine maintenance
Light controlInstrument panel
Brightness
control
+
Store
Turn
OVERVIEW
(1)
(3)
(5)(2)
(4)
NOTE:Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
NOTE: This is also the
trip meter reset button.
*It may take up to 10 seconds after
pushing button for the door to open
if the internal tank pressure is high.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 8

1011
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Transmission
1The “POWER” switch must be set at “ON” and the brake pedal depressed
to shift from Park.
2The engine brake is the equivalent of downshifting. Shift to “B” when
engine braking is desired (i.e. downhill driving, coasting to a stop, etc.).
Park1
Reverse
Neutral
Drive
BEngine braking2
Steering lock release
Turn
Push
Auto lock functions
Automatic door locks can be programmed to operate in four different
modes, or turned OFF.
Doors lock when shifting from Park.
Doors lock when the vehicle speed goes above approximately 12 mph.
Doors unlock when shifting into Park.
Doors unlock when the “POWER” switch is set from ON to ACC or OFF
and driver’s door is opened.
Refer to the
Owner’s Manualfor more details.
(1) Put the selector lever in “P.”
(2) Depress the brake pedal, and press the “POWER” switch briefly
and firmly.
(3) The “READY” light will blink. After a few seconds, when the light
remains steady and a beep sounds, you may begin driving.
Starting the Hybrid System
The Hybrid Synergy Drive System utilizes a computercontrolled gasoline
engine and electric motor to provide the most efficient combination of
power for the vehicle. To conserve energy, when the brakes are applied
the braking force generates electricity which is then sent to the traction
battery. In addition, the engine shuts off when the vehicle is stopped. The
benefits are better fuel economy, reduced vehicle emissions and improved
performance.
NOTE: Fuel consumption and energy information of the Hybrid System
are shown on the multiinformation display and/or navigation
system screen (if equipped).
Tips for improved fuel economy
1. Ensure tire pressures are maintained at levels specified in the Owner’s
Manual
.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on the
highway.
4. When possible, avoid sudden stops to maximize regenerative braking
energy.
5. Minimize use of the Air Conditioning.
Hybrid Synergy Drive System
Gently turn wheel while pressing the “POWER” switch. If the lock does not
release, the switch indicator will flash green.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 10

1011
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Transmission
1The “POWER” switch must be set at “ON” and the brake pedal depressed
to shift from Park.
2The engine brake is the equivalent of downshifting. Shift to “B” when
engine braking is desired (i.e. downhill driving, coasting to a stop, etc.).
Park1
Reverse
Neutral
Drive
BEngine braking2
Steering lock release
Turn
Push
Auto lock functions
Automatic door locks can be programmed to operate in four different
modes, or turned OFF.
Doors lock when shifting from Park.
Doors lock when the vehicle speed goes above approximately 12 mph.
Doors unlock when shifting into Park.
Doors unlock when the “POWER” switch is set from ON to ACC or OFF
and driver’s door is opened.
Refer to the
Owner’s Manualfor more details.
(1) Put the selector lever in “P.”
(2) Depress the brake pedal, and press the “POWER” switch briefly
and firmly.
(3) The “READY” light will blink. After a few seconds, when the light
remains steady and a beep sounds, you may begin driving.
Starting the Hybrid System
The Hybrid Synergy Drive System utilizes a computercontrolled gasoline
engine and electric motor to provide the most efficient combination of
power for the vehicle. To conserve energy, when the brakes are applied
the braking force generates electricity which is then sent to the traction
battery. In addition, the engine shuts off when the vehicle is stopped. The
benefits are better fuel economy, reduced vehicle emissions and improved
performance.
NOTE: Fuel consumption and energy information of the Hybrid System
are shown on the multiinformation display and/or navigation
system screen (if equipped).
Tips for improved fuel economy
1. Ensure tire pressures are maintained at levels specified in the Owner’s
Manual
.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on the
highway.
4. When possible, avoid sudden stops to maximize regenerative braking
energy.
5. Minimize use of the Air Conditioning.
Hybrid Synergy Drive System
Gently turn wheel while pressing the “POWER” switch. If the lock does not
release, the switch indicator will flash green.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 10

1213
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Windshield wipers & washers
Interval wipe Single wipe
Slow
FastPull to wash and wipe
WindowsPower
Up
Down
Driver sideWindow lock switch
Automatic operationPush the switch completely down or pull it
completely up and release to fully open and close. To stop window
midway, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Parking brake
Set: Depress
Release: Depress again
Hold wheel, push lever down, set angle and length, and return lever.
Angle
Length
Lock release lever
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
Lights & turn signals
Turn signals
Headlights
High beam flasher Low beam Headlights
Daytime Running Light system (DRL) Automatically turns on the
headlights at a reduced intensity.
Automatic light cut off system Automatically turns lights off after a
delay of 30 seconds, or the lock switch on remote may be pushed after
locking.
Parking lights
Right turn
Lane change
Lane change
Left turnHigh beamAuto
DRL OFF
*Intermittent windshield wiper frequency adjustmentRotate to increase/decrease wipe frequency.
Adjust frequency*
Front fog lights (if equipped)
Turn
Front fog lights come on only when the headlights are on low beam.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 12

1213
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
FEATURES/OPERATIONS
Windshield wipers & washers
Interval wipe Single wipe
Slow
FastPull to wash and wipe
WindowsPower
Up
Down
Driver sideWindow lock switch
Automatic operationPush the switch completely down or pull it
completely up and release to fully open and close. To stop window
midway, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Parking brake
Set: Depress
Release: Depress again
Hold wheel, push lever down, set angle and length, and return lever.
Angle
Length
Lock release lever
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
Lights & turn signals
Turn signals
Headlights
High beam flasher Low beam Headlights
Daytime Running Light system (DRL) Automatically turns on the
headlights at a reduced intensity.
Automatic light cut off system Automatically turns lights off after a
delay of 30 seconds, or the lock switch on remote may be pushed after
locking.
Parking lights
Right turn
Lane change
Lane change
Left turnHigh beamAuto
DRL OFF
*Intermittent windshield wiper frequency adjustmentRotate to increase/decrease wipe frequency.
Adjust frequency*
Front fog lights (if equipped)
Turn
Front fog lights come on only when the headlights are on low beam.
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 12

15
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCYFEATURES
14
FEATURES/OPERATIONS
Seat adjustmentsFront
Seatback angle
Seat position (forward/backward)
Lumbar support (driver side only)
Seat position, cushion angle and height (driver side only)
Manual seatPower seat
SeatsHead restraints
Lock release button
Fold down Pull
SeatsFolding rear seats
Garage door opener (HomeLink®)*
(if equipped)
Garage door openers manufactured under license from HomeLink®*can
be programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 37 in the
Owner’s Manualfor
more details.
For programming assistance, contact HomeLink
®at 18003553515, or
visit http://www.homelink.com.
*HomeLink®is a registered trademark of Johnson Controls, Inc.
Cruise control
1The set speed may also be cancelled by depressing the brake pedal.2The set speed may be resumed once vehicle speed exceeds 25 mph.
Turning system ON/OFF
Functions
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
11_CamryHV_i.qxd 12/22/09 2:26 PM Page 14