2011 TOYOTA AYGO light

94OCCUPANT RESTRAINT SYSTEMS
CAUTION
DRear−facing child restraint system:
Never install a rear−facing child re-
straint system on the front passen-
ger seat with the airbag manual on−
off switch in the “ON” position. In
the event of an accident, the force
of the rapid inflation of the front
passenger airbag can cause death
or serious injury to the child.
There is a sticker on the passenger
side of the instrument panel and a
label on the front passenger side
sun visor, indicating it is forbidden
to attach a rearward facing child
restraint to the front passenger
seat.
Details of the label on the front
passenger side sun visor are shown
in the illustration on page 91.
MS13026
DWhen installing a rear−facing child
restraint system on the front pas-
senger seat is unavoidable, the
front airbag on the front passenger
side must be disabled. Make sure
that the airbag manual on−off
switch is in the “OFF” position, and
that the indicator light is on. (For
details, see “SRS driver and front
passenger airbags” on page 55 in
this Section.)
AYGO WE 99E37E11 02.18

OCCUPANT RESTRAINT SYSTEMS101
CAUTION
DRear−facing child restraint system:
Never install a rear−facing child re-
straint system on the front passen-
ger seat with the airbag manual on−
off switch in the “ON” position. In
the event of an accident, the force
of the rapid inflation of the front
passenger airbag can cause death
or serious injury to the child.
There is a sticker on the passenger
side of the instrument panel and a
label on the front passenger side
sun visor, indicating it is forbidden
to attach a rearward facing child
restraint to the front passenger
seat.
Details of the label on the front
passenger side sun visor are shown
in the illustration on page 98.
MS13026
DWhen installing a rear−facing child
restraint system on the front pas-
senger seat is unavoidable, the
front and side airbags on the front
passenger side must be disabled.
Make sure that the airbag manual
on−off switch is in the “OFF” posi-
tion, and that the indicator light is
on. (For details, see “SRS driver
and front passenger airbags” on
page 55 in this Section.)
AYGO WE 99E37E11 02.18

OCCUPANT RESTRAINT SYSTEMS109
MS13070
The rear seat is equipped with a fixing
bar for use exclusively with child re-
straint systems that conform to ISO
specifications.
The bars are installed in the clearance
between the seat cushion and seatback of
both rear seats.
Child restraint systems usingquasi−ISO
specifications can be fixed to these exclu-
sively with fixing bars. In this case, it is
not necessary to fix the child restraint
system with a seat belt on the vehicle.
NOTICE
Ask the manufacturer of the child re-
straint system if the child restraint
system is approved for this model.
MS13071b
CHILD RESTRAINT SYSTEM
INSTALLATION
1. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the exclusive
fixing bars below the tag on the
seatback.
2. Latch the buckles onto the exclusive
fixing bars. If necessary, also move
the front seats forward.
For installation details, refer to the instruc-
tion manual supplied with each product.
AYGO WE 99E37E11 02.18
—Installation with ISOFIX rigid
anchor (ISOFIX child restraint
system) (with rear seat)

11 4STEERING WHEEL AND MIRRORS
MS13083
Adjust the mirror so that you can just
see the rear of your vehicle in the mir-
ror.
To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.
Daylight driving—Lever at position 1
The reflection in the mirror has greater
clarity at this position.
Night driving—Lever at position 2
Remember that by reducing glare you also
lose some rear view clarity.
CAUTION
Do not adjust the mirror while the
vehicle is moving. Doing so may
cause the driver to mishandle the ve-
hicle and an accident may occur re-
sulting in death or serious injuries.
MS13023
To use the vanity mirrors, swing down
the sun visor and open the cover.
AYGO WE 99E37E11 02.18
Anti−glare inside rear view
mirrorVanity mirrors

LIGHTS, WIPERS AND DEFOGGER11 5
Section 1−5
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
DHeadlights and turn signals 116.............................
DHeadlight beam level control 117............................
DEmergency flashers 118....................................
DRear fog light 119..........................................
DInterior light 119...........................................
DWindshield wiper and washer 120...........................
DRear window wiper and washer 120.........................
DRear window defogger 121.................................
AYGO WE 99E37E11 02.18

11 6LIGHTS, WIPERS AND DEFOGGER
Headlights and turn signals
MS14001b
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Position, tail, license plate and
instrument panel lights
Position 2—Headlights and all of the
above
However, on some models, all the lights
above also turn on when the engine is
started with the headlight switch off.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
Adjust the headlight beam level before
turning on the headlights. (See “Headlight
beam level control” on page 117.)
Light reminder buzzer
A buzzer will remind you to turn the lights
off when the driver ’s door is opened if the
engine switch is turned to the “LOCK”
position with the headlights switch on.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
MS14002b
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
The headlight high beam indicator light
(blue light) on the instrument cluster will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to “OFF”.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 7
MS14003b
TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The engine switch must be in the “ON”
position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument cluster flash fast-
er than normal, a front or rear turn signal
bulb has burned out.
Headlight beam level control
MS14004a
To adjust the headlight beam level, turn
the switch.
The following list shows examples of prop-
er switch settings. For loading conditions
other than those listed, adjust the dial
position so that the beam level is the
same as the one obtained according to
the list when only the driver is in the
vehicle. The higher the number of the dial
position, the lower the headlight beam lev-
el.
CAUTION
Always keep the headlight beam at
the proper level, or your headlights
may dazzle other road users, causing
unexpected accidents.
AYGO WE 99E37E11 02.18

11 8LIGHTS, WIPERS AND DEFOGGER
"Vehicle category M1
∗
Loading condition
Indication
figure of
control switch
Driver only or
Driver + one
passenger in the front
seat.
0
All passengers.1
All passengers and
Full luggage loading
to the luggage room.
2
Driver and
Full−luggage loading
to the luggage room.
3
"Vehicle category N1∗
Loading condition
Indication
figure of
control switch
Driver only0
Driver and
Full−luggage loading
to the luggage room
2
∗: To distinguish the vehicle category, ask
any authorized Toyota dealer or repair-
er, or another duly qualified and
equipped professional.
Emergency flashers
MS14005a
To turn on the emergency flashers,
push the switch.
All the turn signal lights will flash. To turn
them off, push the switch once again.
Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.
Always pull as far off the road as pos-
sible.
The turn signal light switch will not work
when the emergency flashers are operat-
ing.
NOTICE
To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.
AYGO WE 99E37E11 02.18