2011 TOYOTA AURIS display

227 2-4. Using other driving systems
2
When driving
UK_AURIS_HV_EERear view monitor guide lines
Guide lines are displayed on the screen.
The guide lines may look differently depending on vehicle orientation or
road conditions.
Vehicle width extension guide lines (blue)
These lines indicate the estimated vehicle width extension.
Distance guide line (blue)
This line indicates a position on the ground about 1 m (3 ft.) behind on the
ground of the rear bumper of your vehicle.
Distance guide line (red)
This line indicates a position on the ground about 0.5 m (1.5ft.) behind on
the ground of the rear bumper of your vehicle.
Vehicle center guide lines (blue)
These lines indicate the estimated vehicle center on the ground.
The rear view monitor system can be operated when
The shift position is in R and the “POWER” switch is in ON mode.

228 2-4. Using other driving systems
UK_AURIS_HV_EE
Switching the screen ON/OFF mode
Displayed area
When the screen is displayed, press
on the inside rear view mirror to
switch the screen ON/OFF mode.
Screen ON mode: Green indicator comes
on.
Screen OFF mode: Amber indicator
comes on.
The auto anti-glare inside rear view mir-
ror will revert to the screen ON mode
each time the “POWER” switch is in the
ON mode.
The area covered by the camera is lim-
ited. Objects that are close to either cor-
ner of the bumper or under the bumper
cannot be seen on the screen.
The area displayed on the screen may
vary according to vehicle orientation or
road conditions.
Corners of bumper

231 2-4. Using other driving systems
2
When driving
UK_AURIS_HV_EE
CAUTION
When using the rear view monitor system, observe the following pre-
cautions to avoid an accident that could result in death or serious inju-
ries.
Never depend solely on the monitor system when reversing.
Always check visually and with the mirrors to confirm your intended path is
clear.
Use your own eyes to confirm the vehicle’s surroundings, as the displayed
image may become faint or dark, and moving images will be distorted, or
not entirely visible when the outside temperature is low. When backing up,
be sure to check behind and all around the vehicle visually and with the
mirrors before proceeding.
Always check the vehicle surrounding area, because the guide lines are
ancillary lines.
The guide lines are ancillary lines and do not change even if the steering
wheel is turned.
Depicted distances between objects and flat surfaces differ from actual
distances.
Do not use the system if the back door open.
Conditions which may affect the rear view monitor system
If the back of the vehicle has been hit, the camera’s position and mounting
angle may have changed. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
Rapid temperature changes, such as when hot water is poured on the
vehicle in cold weather, may cause the system to function abnormally.
If the camera lens is dirty, it cannot transmit a clear image. Rinse with
water and wipe with a soft cloth. If extremely dirty, wash with a mild
cleanser and rinse.
The displayed image may be darker and moving images may be slightly
distorted when the system is cold.
Caution while driving in reverse
Do not change modes while the vehicle is moving.

232 2-4. Using other driving systems
UK_AURIS_HV_EE
NOTICE
Camera precautions
As the camera has a water proof construction, do not detach, disassemble
or modify it. This may cause incorrect operation.
Do not subject the camera to a strong impact.
If the camera lens becomes dirty, it cannot transmit a clear image. If water
droplets, snow, or mud adhere to the lens, rinse with water and wipe with a
soft cloth. If the lens is extremely dirty, wash it with a mild cleanser and
rinse. Do not rub hard.
Do not allow organic solvent, car wax, window cleaner or glass coat to
adhere to the camera. If this happens, wipe it off as soon as possible. Do
not rub hard.
When replacing tires, please consult any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional. If you
replace the tires, the area displayed on the screen may change.

248
UK_AURIS_HV_EE
3-1. Using the air conditioning system and defogger
Air conditioning system
Using the automatic mode
Press .
The air conditioning system will begin to operate.
Press “” to increase the temperature and “” to decrease the
temperature on .
Air outlets and fan speed are automatically adjusted according to the
temperature setting.
Air outlet displayWindshield defogger Temperature control
Outside air or recirculated air mode
Fan speed
Temperature setting display OffAutomatic mode
Changes the air outlets used
Fan speed display Air conditioning
ON/OFF switch
STEP1
STEP2

249 3-1. Using the air conditioning system and defogger
3
Interior features
UK_AURIS_HV_EE
Adjusting the settings
Adjusting the temperature setting
Press “” to increase the temperature and “” to decrease the tem-
perature on .
Adjusting the fan speed
Press “” (increase) or “” (decrease) on .
The fan speed is shown on the display. (7 levels)
Press to turn the fan off.
Changing the air outlets
Press .
The air outlets switch each time is pressed. The air flow
shown on the display indicates the following.
Air flows to the upper body.
: Some models

259 3-2. Using the audio system
3
Interior features
UK_AURIS_HV_EETraffic information
Press .
TP mode: The system automatically switches to traffic information
when a broadcast with a traffic information signal is
received.
The station returns to the previous one when the traffic infor-
mation ends.
TA mode: The system automatically switches to traffic information
when a broadcast with a traffic information signal is
received. In FM modes, the system will be mute unless
traffic information is being broadcast.
The audio system returns to the previous mode when the traf-
fic information ends.
Traffic information cannot be heard if the hands-free phone
system is in use.
The audio system mode changes as follows each time is
pressed.
FM modes: TPTAOFF
Modes other than FM modes: TAOFF
Emergency broadcast reception mode
“ALARM” appears on the display in the event that an emergency
broadcast is received, and the emergency broadcast is aired.

262
3-2. Using the audio system
UK_AURIS_HV_EE
Using the CD player
Loading CDs
Insert a CD.
Ejecting CDs
Press and remove the CD.
Selecting a track
Press “
” to move up or “” to move down using until the
desired track number is displayed.
: If equipped
Vo l u m e
Random playback
Selecting a track, fast-forwarding or reversingRepeat play
Playback PowerCD eject
Displays text message
Selecting a CD
(with changer only)