2011 TOYOTA AURIS display

304
3-3. Using the Bluetooth® audio system
UK_AURIS_HV_EE
Setting up a Bluetooth® enabled por table player
: If equipped
Registering a portable player in the Bluetooth® audio system allows
the system to function. The following functions can be used for reg-
istered portable players:
Functions and operation procedures
Press until “BTA” is displayed.
Press and select “Setup” using .
Select one of the following functions using .
Registering a portable player
“Pair Audio”
Selecting a portable player to be used
“Select Audio”
Changing the registered name
“Change Name”
Listing the registered portable players
“List Audios”
Changing the passkey
“Set Passkey”
Deleting a registered portable player
“Delete Audio”
STEP1
STEP2
STEP3

310 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
TitlePage
Using the hands-free phone system
Using the hands-free phone system for
the first time
Menu list of the hands-free phone
systemP. 314
Making a phone call
Dialing by inputting a name
Speed dialing
When receiving a phone call
Transferring a call
Using the call history memoryP. 320
Setting a cellular phone
Registering a cellular phone
Selecting the cellular phone to be used
Changing a registered name
Listing the registered cellular phones
Deleting a cellular phone
Changing the passkey
Turning the hands-free phone
automatic connection on/offP. 323
Security and system setup
Setting or changing the PIN
Locking or unlocking the phone book
Setting playback volume
Displaying the Bluetooth
® device
address and name
InitializationP. 327
Using the phone book
Adding a new phone number
Setting speed dials
Changing a registered name
Deleting registered data
Deleting speed dials
Listing the registered dataP. 331

314
3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Using the hands-free phone system (for cellular phone)
: If equipped
Audio unit
Display
A message, name, phone
number, etc. is displayed.
Lower-case characters and
special characters cannot be
displayed.
Displays information that is
too long to be displayed at
one time on the display
(press and hold)
Selects speed dials
Selects items such as menu
or number
Turn: Selects an item
Press: Inputs the selected
item
Bluetooth
® connection con-
dition and reception level
If “BT” is not displayed, the
hands-free phone system
cannot be used.

316 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to register
a cellular phone in the system. The phone registration mode will be
entered automatically when starting the system with no cellular
phone registered. Follow the procedure below to register a cellular
phone:
Press the off-hook switch or the talk switch.
Select “Pair Phone” using .
Select “Record Name” using , and say the name to be
registered after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
Registration to the hands-free phone system only
Select “Phone Only” using .
Registration to the hands-free phone system and Bluetooth
® audio
system at the same time
Select “Int. Audio” using .
A passkey will be displayed.
Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
STEP1
STEP2
STEP3
STEP4
STEP5
STEP5
STEP6

318 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
“Setup”“Security”“Set PIN” Setting a PIN code
“Phbk Lock” Locking the phone book
“Phbk Unlock” Unlocking the phone book
“Phone
Setup”“Pair Phone”Registering the cellular
phone to be used
“Change Name”Changing a registered name
of a cellular phone
“Delete Phone”Deleting a registered cellular
phone
“List Phones”Listing the registered cellular
phones
“Select Phone”Selecting a cellular phone to
be used
“Set Passkey” Changing the passkey
“Hands-free
power”Setting a Hands-free power
on/off
“System
Setup”“Playback Vol” Setting playback volume
“Device Name”Displaying a device informa-
tion
“Initialize” Initialization
First menuSecond
menuThird menuOperation detail

320
3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Making a phone call
Dialing by inputting a name
Press the talk switch and say a registered name after the
beep.
The desired name or number is displayed.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Select “Dial” using .
: If equipped
Making a phone call
Dialing by inputting a name
Speed dialing
Dialing a number stored in the outgoing history memory
“Redial”
Dialing a number stored in the incoming history memory
“Call back”
Receiving a phone call
Answering the phone
Refusing the call
Transferring a call
Using the call history memory
Dialing
Storing data in the phone book
Deleting
STEP1
STEP2

327
3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Security and system setup
Setting or changing the PIN
Setting a PIN
Select “Set PIN” using .
Enter a PIN using .
Input the code 1 digit at a time.
: If equipped
To enter the menu of each setting, follow the steps below using
:
Security setting items and operation procedures
Setting or changing the PIN (Personal Identification Number)
1. “Setup”  2. “Security”  3. “Set PIN”
Locking the phone book
1. “Setup”  2. “Security”  3. “Phbk Lock”
Unlocking the phone book
1. “Setup”  2. “Security”  3. “Phbk Unlock”
System setup items and operation procedures
Setting playback volume
1. “Setup”  2. “System Setup”  3. “Playback Vol”
Displaying the Bluetooth
® device address and name
1. “Setup”  2. “System Setup”  3. “Device Name”
Initialization
1. “Setup”  2. “System Setup”  3. “Initialize”
STEP1
STEP2

329 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Displaying the Bluetooth® device address and name
Select “Device Name” using .
Turn to display the Bluetooth
® device address and
name.
Select “Go Back” using to return to “System Setup”.
Initialization
Select “Initialize” and then “Confirm” using .
Select “Confirm” again using .
STEP1
STEP2
STEP3
STEP1
STEP2