2011 Seat Alhambra remove seats

132
Seats and storage compartments
Net partition* Fig. 93 Unfold the net partition
1 then fold it again
2 and
3 .
Fig. 94 In the luggage
comp
ar
tment: Install the
net partition behind the
second row of seats.
The net partition can prevent objects in the luggage compartment entering
the pas
senger compartment / the driver area.
First remove the net from its bag and unfold it. Fold out the net partition
Fol

d out the support transversal rods ⇒ fig. 93 1 for the net partition fully
in the direction of the arr

ow until you hear a “click”.
Installing the net partition behind the second row of seats
● Hook in the net partition on the left-hand side roof support ⇒ fig. 94 A .
To do thi s, guide the r

od from up to down.
● Hook in the net partition on the rear right-hand side roof support by
pres
sing on the rod.
● Secure the net partition hooks into the straps in the front of the luggage
compar
tment B then tighten them.


134
Seats and storage compartments WARNING (Continued)
● Loose objects in the luggage compartment can suddenly slide and
c h
ange the way the vehicle handles.
● Secure all objects, little and large.
● Never secure a load that is too heavy for the fastening rings.
● Never secure a child seat to the fastening rings. Note
● The maximum load of the fastening rings is approximately 3.5 Kn (3.57
K p).
● Y

ou can find suitable transport straps and load securing systems at a
speci
alist workshop. SEAT recommends visiting a Technical Service. 
Rails and attachment system* Fig. 96 In the luggage
comp
ar

tment: System in-
cluding rails, adjustable
attachment elements 1 and adjustable tighten-
ing s
tr

aps 2 .
The rails and attachment system consists of four rails, movable attachment
elements, s tr

aps to be secured to the rails and a net with supports to cover baggage ⇒ page 135.

The rail and attachment system is designed to se-
cure light objects. If the seats in the third row are to be occupied by passen-
gers then attachment elements should never be placed in the section of the
rails close to the seats ⇒  .
Ins t

alling the attachment elements
● Fit the attachment element with the ruts facing upwards ⇒ fig. 96 1 to
the upper p ar

t of the guide and press downwards.
● Move the attachment element to the desired position.
● Always ensure that the attachment inserts into the guide system ⇒  .
Remo v

ing the attachment elements
● Remove the attachment element from the guide and pull downwards.
Securing a lo
ad
● Pull the strap through the attachment element and secure the load
⇒  .
WARNING
In case of an accident or sudden braking, the attachment elements in the
par t

s of the rails close to the seats of the third row could injure seat oc-
cupants.
● Whenever the seats on the third row are to be occupied, remove the
attachment
elements from the rails or move them all the way back. WARNING
Movable attachment elements that are not secured correctly can be re-
le a

sed from the guide in case of sudden braking or accident. As a result,
objects may be fired through the passenger compartment causing seri-
ous injury or death.
● Always ensure that the movable attachment elements are correctly in-
serted int
o the guides. 

135
Seats and storage compartments WARNING
Unsuitable or damaged ropes or straps may be released in case of sud-
den brak in
g or an accident. As a result, objects may be fired through the
passenger compartment causing serious injury or death.
● Always use the attachment straps of the rail and attachment system.
● Secure the attachment straps firmly to the attachment elements.
● Loose objects in the luggage compartment can suddenly slide and
chan
ge the way the vehicle handles. WARNING (Continued)
● Sec ure all objects, little and large.
● Nev
er sec

ure a child seat to the attachment elements. CAUTION
● The attachment elements placed on the rail system can be damaged
when f o

lding down seats from the third row or putting them back into posi-
tion and these can also damage the seats themselves. Before folding down
or repositioning the seats, remove the attachment elements and supports
for the net from the rail system. 
Baggage net* Fig. 97 Hook the baggage net
A and use it as a bag
B .
Safety First Operating instructions Practical tips Technical Data

136
Seats and storage compartments Fig. 98 Release the bag-
gag
e net
.
If the seats in the third row are to be occupied by passengers then attach-
ment elements
should never be placed in the section of the rails close to
the seats ⇒  .
Ins t

alling the baggage net supports
● Fit the baggage net support into the guide from the back and press
downw
ards.
● Move the baggage net support to the required position.
● Always ensure that the net support inserts into the rail system ⇒  .
Hookin g the b

aggage net into the support
Place the attachment rod on the baggage net support ⇒ fig. 97 1 and ro-
tat e 90° t

o the left 2 . The red mark on the attachment rod should not be
vi s
ible ⇒  .
Us in
g the net for bag type baggage
● Fit the baggage net supports to each one of the upper rails.
● Fit a movable baggage net attachment element to each one of the lower
guides ⇒ 

page 134.
● Hook the baggage net into the supports. ●
Hook the baggage net attachment strap underneath into one of the mov-
abl
e attachment elements B .
● Join the baggage net supports to the upper rails as much as possible by
pu shin

g them.
● Press the sides of the baggage net together so that they are held by the
Velcr
o.
Using the baggage net to separate the luggage compartment
● Fit the baggage net supports to each one of the upper rails.
● Fit the baggage net supports to each one of the lower rails.
● Hook the baggage net into the supports.
To rel
ease the baggage net
● Rotate the attachment rod 90° to the right ⇒ fig. 98 1 until you can see
the red m ark

on the rod. Pull the attachment rod upwards 2 .
● Only with 5 places: After r
emoving, place the baggage net safely in the
front compartment on the floor of the luggage compartment ⇒ page 141.
Removing the baggage net supports
● Remove the net attachment element from the rail and pull it out down-
ward
s. WARNING
In case of an accident or sudden braking, the net attachment elements in
the par t

s of the rails close to the seats of the third row could injure seat
occupants.
● Whenever the seats on the third row are to be occupied, remove the
attachment
elements from the rails or move them all the way back. 

137
Seats and storage compartments WARNING
Baggage net supports that are not secured correctly can be released from
the guide in ca se of
the sudden braking or accident. As a result, objects
may be fired through the passenger compartment causing serious injury
or death.
● Always ensure that the baggage net supports are correctly inserted
into the rai
ls; the red mark should not be visible.
● Never secure a child seat to the baggage net supports. CAUTION
● The baggage net supports placed on the rail system can be damaged
when f o

lding down seats from the third row or putting them back into posi-
tion and these can also damage the seats themselves. Before folding down
or repositioning the seats, remove the baggage net supports from the rail
system. Retaining hooks Fig. 99 In the luggage
comp
ar
tment: retaining
hooks.
On the right-hand side of the luggage compartment, there are folding re-
taining hook
s ⇒ fig. 99 that can be used to secure light shopping bags.
● Press the retaining hooks down ⇒ fig. 99 (arrow) and f
old them.
● Hook the bags in place.
● After use, raise the hooks again. WARNING
Never use these hooks to secure objects. In case of sudden braking or an
acc ident, the hook

s could rupture. CAUTION
The hooks can support a maximum of 2.5 kg (about 5 lbs). Safety First Operating instructions Practical tips Technical Data

138
Seats and storage compartments
Luggage net* Fig. 100 In the luggage
comp
ar
tment: net used
on secured baggage.
The baggage net can be used to secure lighter items.
Hooking the b
aggage net into the luggage compartment floor
● Hook the baggage net into the fastening rings ⇒ fig. 100 1 and
2 .
Rel e

asing the baggage net
The secured baggage net is taut ⇒  .
● Carefully unhook the baggage net hooks from the fastening rings 1 .
● Carefully unhook the baggage net hooks from the fastening rings 2 . WARNING
The elastic baggage net stretches when it is secured to the luggage com-
par tment

fastening rings. The secured baggage net is taut. The hooks on
the baggage net can cause injury if the net is incorrectly hooked or un-
hooked.
● Always ensure that the hooks do not suddenly release from the fas-
tening rin
gs when hooking or un-hooking.
● Always keep your face and eyes protected at a safe distance to avoid
injury shou
ld a hook slip while hooking or unhooking.
● Always engage the hooks in the order given. If a baggage net hook
spring
s back this can cause injury. 
Roof carrier system* Introduction The vehicle roof has been designed to optimise aerodynamics. For this rea-
son, con
v

entional roof carrier systems cannot be secured to the roof rails.
Given that the water drains have been incorporated into the roof for aerody-
namic reasons, only the SEAT approved basic supports and roof carrier sys-
tems can be used.
When should the roof carrier system be removed?
● When it is not being used.
● When the vehicle is being washed in a car wash.
● When the vehicle height exceeds the maximum height (for example, in a
garag
e). 

139
Seats and storage compartments
Additional information and warnings:
● Light ⇒ page 95
● Tr
ansporting ⇒ page 13
● E

cological driving ⇒ page 225
● Wheel

s and tyres ⇒ page 293
● A

ccessories, parts replacement, repairs and modifications ⇒ page 257WARNING
The risk of an accident is increased by transporting heavy or bulky loads
on the roof , whic

h affects the car's handling by shifting the centre of
gravity and increasing susceptibility to cross winds.
● Always secure loads correctly with suitable and undamaged attach-
ment rope or s
traps.
● Large, heavy, wide and flat loads negatively affect the vehicle aerody-
namics, c
entre of gravity and handling.
● Avoid brusque manoeuvres and sudden braking.
● Adjust your speed and driving style to visibility, road, traffic and
weather c
onditions. CAUTION
● Always remove the roof carrier system from the roof before entering a car
w a

sh.
● The height of your vehicle is changed by the installation of the roof carri-
er and the load sec
ured on it. Compare the vehicle height with the passage
height, for example in underground car parks or entering garage doors.
● The roof antenna, the range of the panoramic sliding roof and the tail-
gate shou
ld not be affected by the roof carrier system and the load being
transported.
● Take extra care not to let the tailgate strike the roof load when opening. For the sake of the environment
The vehicle uses more fuel when the roof carrier system is fitted. 
Securing the base supports and roof carrier system Fig. 101 Attachment
points
f

or the basic sup-
port and the roof carrier
system.
The mounts are the basis of a complete roof carrier system. Special fixtures
mus t

then be added in order to safely transport luggage, bicycles, skis, surf
boards or boats on the roof. All these system components are available
from an Authorised Service Centre.
It will only be possible to install a basic support or roof carrier system if the
vehicle has a roof rail.
Securing the base supports and roof carrier system
Always secure the base supports and roof carrier system correctly.
The roof carrier system must always be installed exactly according to the in-
structions provided. Safety First Operating instructions Practical tips Technical Data

149
Seats and storage compartments WARNING
Improper use of the cup holders can cause injury.
● Never place hot drinks in the drink holders. During sudden braking or
drivin g m
anoeuvres, the hot drink could be spilled and lead to scalding.
● Ensure that bottles and other object is dropped in the driver footwell,
as it
could get under the pedals and obstruct their working.
● Never place heavy containers, food or other heavy objects in the cup
holder
. In the event of an accident, these heavy objects could be thrown
around the passenger compartment and cause serious injuries. WARNING
Closed bottles inside the vehicle could explode or crack due to the heat
or the co l

d.
● Never leave a closed bottle in the vehicle if the inside temperature is
too high or too lo
w. CAUTION
Do not leave open cans in the cup holders when the vehicle is in motion.
They c ou

ld spill during braking, for example, and cause damage to the vehi-
cle and the electrical system. Note
The cup holders can be removed for cleaning. Cup holders in front centre console
Fig. 115 Front centre
con
so

le: cup holder.
● To open, move the c
over backwards ⇒ fig. 115.
● To close, move the cover forwards. Safety First Operating instructions Practical tips Technical Data