2011 PEUGEOT 207 height adjustment

8
FAMILIARISATION
INSTRUMENTS AND CONTROLS



1.
Cruise control/speed limiter
switches.

2.
Steering wheel adjustment control.

3.
Lighting and direction indicator
control stalk.

4.
Instrument panel.

5.
Driver's airbag.
Horn.

6.
Gear lever.

7.
Parking brake.

8.
Panoramic sunroof blind control
(SW).

9.
Bonnet release lever.

10.
Door mirror controls.
Electric window controls.
Rear electric windows deactivation
control.

11 .
Fusebox.

12.
Headlamp height adjustment.

13.
Side adjustable air vent.

14.
Front door window demisting vent.

15.
Speaker (tweeter).

16.
Windscreen demisting vent.

i
10
FAMILIARISATION
SITTING COMFORTABLY

Also...


5.

Access to the rear seats (3-door).


6.
Armrest (except 3-door).

7.
Heated seat.


Front seat adjustment
Steering wheel adjustment


1.
Forwards-backwards adjustment.

2.
Height adjustment.

3.
Seat back angle adjustment.

4.
Head restraint height adjustment.



52

1.
Releasing the adjustment mechanism.

2.
Adjustment for height and reach.

3.
Locking the adjustment mechanism.
As a safety precaution, these operations
must only be carried out when stationary.



59

i
11
FAMILIARISATION
SITTING COMFORTABLY

Door mirror adjustment


A.
Selecting the mirror.

B.
Adjusting the position of the mirror.

C.
De-selecting the mirror.



57

Also...


D.
Folding/Unfolding.


Rear view mirror adjustment



1.
Selecting the "day" position of the
mirror.

2.
Adjusting the mirror.



58



Front seat belts



1.
Fastening.

2.
Height adjustment.



105

2
52
FRONT SEATS
Seat consisting of a seat cushion, seat
back and head restraint which can all
be adjusted to adapt your position for
maximum ease of driving and comfort.

1. Forwards-backwards adjustment


)
Lift the control and slide the seat for-
wards or backwards.

2. Driver's or passenger's seat
height adjustment


)
Pull the handle upwards or push it
downwards as many times as neces-
sary to obtain the required position.

3. Seat back angle adjustment


)
Push the handle towards the rear.

2
!
!
53
No person or object must prevent
the seat slide from returning to its
initial position; return to this posi-
tion is necessary for the seat to
lock in place.
Take care not to trap the seat belt
to avoid hindering the passage of
the rear passengers.
4. Access to rear seats (3 door)


)
Pull the handle to fold the seat back
and move the seat forwards. On re-
positioning, the seat returns to its
initial position.
5. Head restraint height adjustment


)
To raise the head restraint, pull it up-
wards.

)
To remove the head restraint, press
the lug A
and pull the head restraint
upwards.

)
To put the head restraint back in po-
sition, locate the stems of the head
restraint in the holes, taking care to
keep them in line with the seat back.

)
To lower the head restraint, press
the lug A
and the head restraint at
the same time. The head restraint has a frame with
a notch which prevents the head
restraint from lowering; this is a
safety device which provides pro-
tection in the event of an impact.

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of
the head.

Never drive with the head re-
straints removed; they must be in
place and correctly adjusted.

2
!
i
COMFORT
59
STEERING WHEEL ADJUSTMENT



)
When stationary
, pull the con-
trol lever to release the adjustment
mechanism.

)
Adjust the height and reach to suit
your driving position.

)
Push the control lever to lock the ad-
justment mechanism.
As a safety precaution, these op-
erations should only be carried out
while the vehicle is stationary.

Component which protects against sunlight
from the front or the side, also equipped
with an illuminated courtesy mirror.


)
With the ignition on, raise the con-
cealing fl ap; the mirror is lit automati-
cally.
This sun visor is also equipped with a
ticket holder.
TOLL CARD/CAR PARK TICKET
WINDOW
S
Facility for affi xing toll cards and/or car
park tickets.
These windows are located on each
side of the base of the rear view mirror.
They are two non-refl ective areas of the
athermic windscreen.
The athermic windscreen limits
heating of the passenger compart-
ment by reducing the effects of the
sun's rays (ultra-violet). It consists
of a refl ective layer, which also
blocks certain radio-electric signals
(toll card payments, ...).

4
i
85
VISIBILITY
HEADLAMP ADJUSTMENT
This position is suffi cient to avoid
causing dazzle.
Higher settings may limit the spread
of light from the headlamps.
The initial setting is position "0"
. To avoid causing a nuisance to other
road users, the height of the headlam-
ps should be adjusted in relation to the
load in the vehicle.

0

.
Driver only or driver + front passenger.

-
. Intermediate setting

1.
5 people.

-
. 5 people + load in the boot.

2.
Driver only + maximum authorised
load in the boot.

6SAFETY
105
SEAT BELTS
Height adjustment

Seat belt not fastened/unfastened
warning lamp on the instrument
panel
Fastening


)
Pull the strap, then insert the tongue
in the buckle.

)
Check that the seat belt is fastened
correctly by pulling the strap.


)
To lower the attachment point, squeeze
control A
and slide it downwards.

)
To raise the attachment point, slide
control A
upwards.


When the ignition is switched on,
this warning lamp comes on on
the instrument panel if the driver
has not fastened their seat belt.
Above approximately 12 mph (20 km/h)
and for two minutes, this warning lamp
fl ashes accompanied by an audible signal
of increasing volume. When the two minutes
have elapsed, this warning lamp remains on
until the driver fastens their seat belt.
This warning lamp comes on on the in-
strument panel if one or more passengers
unbuckle their seat belt.


Unfastening


)
Press the red button on the buckle.



Front seat belts

The front seat belts are fi tted with a pre-
tensioning and force limiting system.
This system improves safety in the front
seats in the event of front impacts. De-
pending on the severity of the impact,
the pretensioning system instantly tight-
ens the seat belts against the body of
the occupants.
The pretensioning seat belts are active
when the ignition is on.
The force limiter reduces the pressure
of the seat belt on the chest of the oc-
cupant, increasing his protection.
On the 5-door versions, a slider, fi tted
on the seat belt, makes it possible to
support the buckle as close as possible
to the upper mounting.