Black plate (15,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Audio system&1 / :
Turn this switch to manually tune the radio
frequency. Push the switch to configure the
sound settings. When using Music Box/CD
(including MP3/WMA/AAC files on disk)/
DVD/USB memory/Bluetooth streaming
audio (if so equipped)/iPod player you can
change the album or folder to be played.
&2
Preset stations <1>-<6> :
Use these buttons to toggle between the
stations preset in the system. Pushing and holding any of the preset station buttons
will save the station you are listening to.
&3
/ :
Turn this switch to adjust the volume of the
stereo. Push this switch to turn the audio
system ON or OFF.
&4 :
Push to switch between Music Box/CD/
DVD/USB memory/Bluetooth streaming
audio (if so equipped)/iPod player AUX (if
so equipped) screens.
&5
<
> :
Push to search for a track/station auto-
matically or to fast-forward when listening
to music.
&6
<
> :
Push to search for a track/station auto-
matically or to rewind when listening to
music.
&7 :
Push to switch to an XM
®satellite radio
band.
&8 :
Push to switch from the random mode to
repeat mode while listening to music.
&9 :
Push to tune the radio from low to high
frequencies. The radio will stop at each
broadcasting station for 5 seconds. When
operating the CD player, push to preview
the first 5 seconds of each CD track.
&10 :
Push to switch to a different radio band.About Multi function display system
1-7
Black plate (17,1)
Model "R35-N" EDITED: 2009/ 10/ 30
DIGITAL MEDIA SLOTS&1
CD/DVD slot:
Insert a CD/DVD.
&2
:
Push to eject a CD/DVD.
&3
USB connector:
Connect to play an iPod or a USB memory.About Multi function display system
1-9
Page 20 of 312
Black plate (18,1)
Model "R35-N" EDITED: 2009/ 10/ 30
STEERING SWITCH&1 :
Push the source select switch to change
the mode in the sequence of Preset A,
Preset B, Preset C, iPod
®(if so equipped) ,
Music Box, CD, DVD, USB memory and
Bluetooth streaming audio (if so equipped)
and AUX (if so equipped) . If they are not
ready to function, those modes will be
skipped.
&2 :
Allows you to adjust the volume.
&3 :
This can be used when operating the audio
system. Push the seek button to select a
radio station or a song. Push and hold the
seek button and the system will automati-
cally select a station folder or disc.
&4
<
> :
Push to enter voice recognition mode.
&5
<
> :
Push to display the hands-free phone
operation screen.
&6 :
When using the stopwatch, push this
button to record the required travel time.
When Driver’s Notes is active, pushing this
will record your present position as a
waypoint.
&7 :
Push to start/stop the timer on the Stop-
watch screen or the Driver’s Notes screen
(when displayed) .
1-10
About Multi function display system
Page 21 of 312
Black plate (19,1)
Model "R35-N" EDITED: 2009/ 10/ 30
1. The navigation system starts when theignition switch is pushed to the ACC or
ON position.
INFO:
. After the engine is started, the operation
instructions will only be displayed the first
time the screen is displayed.
.The operations instruction screen will dis-
appear automatically after a few seconds or
when you start to operate the screen. .
The system saves the screen displayed at
the time the engine is turned off.
. “Clarion” logo is a registered trademark of
Clarion Co., Ltd. and the “POLYPHONY
DIGITAL” logo is a registered trademark of
Polyphony Digital Corporation.
About Multi function display system
1-11
START-UP SCREEN
Page 22 of 312
Black plate (20,1)
Model "R35-N" EDITED: 2009/ 10/ 30
MENU SCREEN AND HOW TO OP-
ERATE
Menu screens and their purposesPush, , , or to dis-
play the corresponding menu screen.
How to select a menu item:Example: screen
1. Turn the center dial clockwise or counter- clockwise. An item is highlighted accord-
ingly.
2. To select the preferred menu item, highlight the item and push . The next
screen is displayed. 3. Push
<
>to return to the previous
screen without applying any changes.
Push
Page 23 of 312
Black plate (21,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Using controls to adjust values,
levels, etc.There are three main methods you can use to
control the navigation system: the center dial or
the touch panel. Use these controls to adjust the
volume of phone and voice guidance, the display
brightness, etc.
How to adjust:1. Highlight the preferred setting item andpush . The color of the corre-
sponding adjustment item changes.
2. Use the center dial or the touch panel, and the value or bar indicating levels increases
or decreases accordingly.
3. Push or<
>to apply the
setting.
INFO:
. You can also adjust the volume of phone and
voice guidance, etc. by tilting the steering
switch up and down.
. This same adjustment can also be made by
the touch panel operation.“LIST SCREEN” page 1-14
About Multi function display system
1-13
Page 24 of 312
Black plate (22,1)
Model "R35-N" EDITED: 2009/ 10/ 30
LIST SCREENAfter searching for a point of interest, a list
screen is displayed.
Depending on the list displayed, it can be
sorted.Items displayed in list*1
Highlight the preferred item from the list andpush to select it. If a location or
facility name is not completely displayed
(due to length) , highlight the item to display
the hidden part of the name.
*2
Distance from the current location
*3
Direction to the point of interest
*4
If the entire list cannot be displayed on the screen, the system displays the total
number of items in the list and the entry
number of the selected item. Turn the
center dial or push the up or down buttons
of the main directional buttons to scroll the
list.
*5
An item that starts with the selected letter
will be displayed at the top of the list.
*6
Highlight and push to sort the
list in the original order.
*7
When the list is sorted by the shortest distance, the selected location can be
confirmed in the preview displayed on the
right side of the screen.
*8
Highlight and push to modify
the search conditions.
1-14
About Multi function display system