10Names and functions of parts
Names and functions of parts
Replacing the battery
Use your fi ngernail to press tab A on
the battery case at the backside of the
remote control. While pressing tab A in the
direction shown in (1), pull the battery case
out as shown in (2)
NOTE
● When disposing of the lithium battery, apply insulating
tape and dispose of the battery in accordance with
applicable local regulations.
Place a new battery in the battery case
with its positive side facing up
mb075
Nouvelle pile (borne positive)
Before using the remote control
The remote control comes with a battery
installed.
There is an insulation sheet to prevent the
battery from discharging. Remove this
insulation sheet before using the remote
control.
mb073
Insulation sheet
Operating instructions
When using the remote control to operate
the system, aim the remote control at the
remote control sensor.
mb077
Remote control sensor
NOTE
● Do not disassemble or drop the remote control, and
do not subject the remote control to any physical
shock.
● Do not place any heavy objects on top of or sit on
the remote control.
● If the remote control sensor is exposed to direct
sunlight or other strong light, it may stop functioning
properly or stop operating at all. In this situation,
block out the light.
● Store the remote control in the seatback pocket
when not in use.
11 Names and functions of parts
Names and functions of parts
● Be sure to place the battery in with the correct
polarity.
● Replace the old battery with a new one of the same
type (CR2025LITHIUM).
Replace the battery case into the
remote control
mb076
Slide the battery case in
until tab A locks it in place. Ta b A
·
For safety’s sake, keep batteries out of the
reach of children.
WARNING
