Handling of discs
67
Handling of discs
●Clean the disc with a soft
cloth, wiping from the center
hole to the outer edge. Do not
use benzine, record cleaning
spray, anti-static agents, or
chemically treated tissues.
Doing so could damage the
disc surface.
●Discs are made of plastic. To
prevent discs from warping,
always put them in their cases
and keep them out of direct
sunlight.
●Discs turn at high speeds, so
do not use cracked or warped
discs. Doing so could cause a
malfunction or breakdown.
●The system may not function properly when driving on
rough roads, due to the severe vibrations.
●If foreign matter should get into the system ( through the
disc loading slot, for example) contact your authorized
dealer.
Using the system in this state could cause a malfunction or
breakdown.
●Using heart shaped, octagonal,
or other special shaped discs,
or partially transparent discs
could cause a malfunction.
●A new disc may still have
burrs on its periphery and
center hole, so be sure to
check for such burrs.Using
a disc that has burrs can
cause a malfunction, so be
sure to remove any burrs
using a ballpoint pen or other
implement.
●Do not touch the disc surface
(the shiny, rainbow colored
side) when handling the disc.
Always hold the disc at the
outer edges, or at the center
hole and the outer edge. A
dirty or scratched disc could
cause a malfunction.
●Do not apply labels or stickers
to the disc and do not scratch
the disc.
