2011 Lexus IS F fuel tank capacity

90
1-5. Refueling
IS F_EE
Closing the fuel tank cap
When replacing the fuel tank
cap, turn it until a clicking
sound is heard.
After releasing your hand, the
cap will turn slightly in the
opposite direction.
Fuel types
EU area:
Unleaded gasoline conforming to European standard EN228, Research
Octane Number of 95 or higher
Except EU area:
Unleaded gasoline, Research Octane Number of 95 or higher
Use of ethanol blended gasoline in a gasoline engine
Lexus allows the use of ethanol blended gasoline where the ethanol content
is up to 10%. Make sure that the ethanol blended gasoline to be used has a
Research Octane Number that follows the above.
Fuel tank capacity (reference)
64 L (16.9 gal., 14.0 Imp. gal.)
When the fuel filler door opener is inoperable
The lever can be used to open the fuel
filler door if the fuel filler door cannot be
opened using the inside switch because
the battery is discharged or for any other
reason.

474
6-1. Specifications
IS F_EEEngine number
The engine number is stamped on the engine block as shown.
Engine
Fuel
Model2UR-GSE
Ty p e8-cylinder V type, 4-cycle, gasoline
Bore and stroke94.0  89.5 mm (3.70 3.52 in.)
Displacement4969 cm3 (303.2 cu. in.)
Drive belt tensionAutomatic adjustment
Fuel type
EU area:
Unleaded gasoline conforming to European stan-
dard EN228 only
Except EU area:
Unleaded gasoline only
Research octane num-
ber95 or higher
Fuel tank capacity
(Reference)64 L (16.9 gal., 14.0 Imp. gal.)

504
IS F_EE
GAS STATION INFORMATION
Auxiliary catch lever
P. 363Trunk opener
P. 5 9Fuel filler door
P. 8 9
Hood lock release lever
P. 3 6 3Fuel filler door opener
P. 8 9Tire inflation pressure
P. 4 8 0
Fuel tank capacity
(Reference)64 L (16.9 gal., 14.0 Imp. gal.)
Fuel typeP. 90, 474
Cold tire inflation
pressureP. 480
Engine oil capacity
(Drain and refill 
reference)L (qt., Imp. qt.)
Without filter 8.2 (8.7, 7.2)
With filter 9.3 (9.8, 8.2)
Engine oil type
Toyota Genuine Motor Oil or equivalent
Oil grade: P. 475
5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-
Conserving”, SN “Resource-Conserving” or ILSAC
multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity: SAE 5W-30