2011 Lexus IS F trunk release

IS F_EE
14
Multi-information display
P. 167
Pictorial indexInstrument panel
(Left-hand drive vehicles)
Headlight switch
Turn signal lever
Fog light switch P. 172
P. 158
P. 175
Paddle shift switches
P. 152, 154
Gauges and meters
P. 161Windshield wiper and washer switch
P. 176
Trunk opener main switch P. 57
Glove box P. 325
Tilt and telescopic steering control switch P. 76
Parking brake pedal P. 159
Engine (ignition) switch P. 145
Hood release lever P. 362
Horn P. 160

IS F_EE
22
Pictorial indexInstrument panel
(Right-hand drive vehicles)
Headlight switch
Turn signal lever
Fog light switch P. 172
P. 158
P. 175
Paddle shift switches P. 152, 154
Gauges and meters
P. 161
Multi-information display
P. 167
Windshield wiper
and washer switch
P. 176
Engine (ignition)
switch
P. 145
Trunk opener
main switch
P. 57
Glove box P. 325
Tilt and telescopic
steering control switch
P. 76
Parking brake pedal P. 159
Hood release lever
P. 362
Horn P. 160

39
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS F_EEEffective range (areas within which the electronic key is
detected)
When locking or unlock-
ing the doors
The system can be operated
when the electronic key is
within about 70 cm (2.3 ft.)
of either of the outside
front door handles. (Only
the doors detecting the key
can be operated.)
When unlocking the
trunk
The system can be operated
when the electronic key is
within about 70 cm (2.3 ft.)
of the trunk release button.
When starting the engine
or changing “ENGINE
START STOP” switch
modes
The system can be operated
when the electronic key is
inside the vehicle.

42
1-2. Opening, closing and locking the doors and trunk
IS F_EE
Switching the door unlock function
It is possible to set which doors the entry function unlocks.
Turn the “ENGINE START STOP” switch OFF.
Cancel the intrusion sensor of the alarm system to prevent unin-
tended triggering of the alarm during the setting change. (P. 97)
When the indicator on the key surface is turned off, push and
hold or for approximately 5 seconds while pushing
on the key.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 3.)
To prevent unintended triggering of the alarm, unlock the doors using the
wireless remote control and open and close a door once after the settings
have been changed. (If a door is not opened within 30 seconds after is
pressed, the doors will be locked again and the alarm will automatically be
set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 9 7 )
STEP1
STEP2
STEP3
Multi-informa-
tion displayUnlocking doorsBeep
Hold either front door han-
dle to unlock all doors.Exterior: Beeps twice
Interior: Pings once
Hold the driver's door han-
dle to unlock only the
driver's door.
Exterior: Beeps three
times
Interior: Pings once
Hold the front passenger’s
door handle to unlock all
doors.

57
1
1-2. Opening, closing and locking the doors and trunk
Before driving
IS F_EESetting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
Close all the doors and switch the “ENGINE START
STOP” switch to IGNITION ON mode. (Perform the step 2
within 10 seconds.)
Shift the shift lever to P or N,
and press and hold the driver’s
door lock switch (
or
) for approximately 5 sec-
onds and then release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
STEP1
STEP2
FunctionShift lever posi-
tionDriver’s door
lock switch posi-
tion
Shift position linked door lock-
ing function
PShift position linked door
unlocking function
Speed linked door locking func-
tion
NDriver's door linked door unlock-
ing function

58
1-2. Opening, closing and locking the doors and trunk
IS F_EE
Impact detection door lock release system
In the event that the vehicle is subject to a strong impact, all the doors are
unlocked. Depending on the force of the impact or the type of accident,
however, the system may not operate.
Using the mechanical key
The doors can also be locked and unlocked with the mechanical key. (P.
458)
Customization that can be configured at any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features P. 484)
CAUTION
To prevent an accident
Observe the following precautions while driving the vehicle.
Failing to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.
Always use a seat belt.
Ensure that all doors are properly closed.
Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers may be thrown out of the
vehicle, resulting in death or serious injury.
Be especially careful for the front doors, as the doors may be opened even
if the inside lock buttons are in locked position.
Set the rear door child protector locks when children are seated in the rear
seat.

436
5-2. Steps to take in an emergency
IS F_EE
Indicates that the trunk
is not fully closed.
flashes and a
buzzer sounds to indi-
cate that trunk is not
fully closed (with the
vehicle having reached
a speed of 5 km/h [3
mph]).
Close the trunk.
(Flashing)
(If equipped)
Indicates that the moon
roof is not fully closed
(with the “ENGINE
START STOP” switch
OFF and the driver's
door opened).
Close the moon roof.
Indicates that the park-
ing brake is still
engaged.
flashes and a
buzzer sounds to indi-
cate that the parking
brake is still engaged
(with the vehicle hav-
ing reached a speed of
5 km/h [3 mph]).
Release the parking
brake.
Warning messageDetailsCorrection procedure

504
IS F_EE
GAS STATION INFORMATION
Auxiliary catch lever
P. 363Trunk opener
P. 5 9Fuel filler door
P. 8 9
Hood lock release lever
P. 3 6 3Fuel filler door opener
P. 8 9Tire inflation pressure
P. 4 8 0
Fuel tank capacity
(Reference)64 L (16.9 gal., 14.0 Imp. gal.)
Fuel typeP. 90, 474
Cold tire inflation
pressureP. 480
Engine oil capacity
(Drain and refill 
reference)L (qt., Imp. qt.)
Without filter 8.2 (8.7, 7.2)
With filter 9.3 (9.8, 8.2)
Engine oil type
Toyota Genuine Motor Oil or equivalent
Oil grade: P. 475
5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-
Conserving”, SN “Resource-Conserving” or ILSAC
multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity: SAE 5W-30