2011 Lexus HS250h brake

31
■Canceling and resuming the speed control
Pulling the lever toward you cancels the
cruise control.
The speed setting is also canceled when
the brakes are applied.
Pushing the lever up resumes the cruise
control and returns vehicle speed to the
set speed.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).
■Selecting conventional constant speed control mode
Dynamic radar cruise control can be used as conventional cruise control if you select con-
stant speed control mode.
Press the “ON-OFF” button to activate
the cruise control.
Press the button again to deactivate the
cruise control.
Vehicle-to-vehicle distance control
mode is always reset when the
“POWER” switch is turned to ON
mode.
Switch to constant speed control mode.
(Push the lever forward and hold for
approximately one second.)
Constant speed control mode indicator
will come on.
Adjusting the speed setting:
P. 3 0
Canceling and resuming the speed set-
ting: P. 3 1
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.

What to do if...
89
List of Warning/Indicator Lights
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
(U.S.A.)
Brake system warning light
(Canada)
Stop the vehicle immediately.
Charging system warning light
High engine coolant temperature warning light (flashes or comes on)
Have the vehicle inspected immediately.
Brake system warning light
(Flashes)
“AFS OFF” indicator light
(if equipped)
(U.S.A.)
Malfunction
indicator lamp(comes on)
Slip indicator light
(Canada)
(Flashes)
“LKA” indicator light
(if equipped)
SRS warning light
(Flashes)
Cruise control indicator light
(U.S.A.)
“ABS” warning light(Flashes)
Radar cruise control indica-
tor light (if equipped)
(Canada)
(Flashes)
Automatic High Beam indica-
tor light (if equipped)
Electric power steering
system warning light
(Flashes and
then continu-
ously on)Tire pressure warning light
(Flashes)
“PCS” warning light
(if equipped)
For further information, refer to the Owner’s Manual.

90
What to do if...
*1: It also comes on due to natural causes such as natural air leaks and tire inflation pressure
changes caused by temperature. Adjust the tire inflation pressure.
*2: When the “PCS” flashes quickly, “BRAKE!” will also be displayed.
Follow the correction procedures.
Open door warning light(On the center
panel)
Front passenger’s seat belt
reminder light
Low fuel level warning lightMaster warning light
(On the instru-
ment cluster)
Driver’s seat belt reminder
light
(Illuminate no
flashing)
Tire pressure warning light*1
See the Owner’s Manual
Tu r n s i g n a l i n d i c a t o rCruise control indicator
Headlight indicator (U.S.A.)Radar cruise control
indicator (if equipped)
Tail light indicator (Canada)“LKA” indicator (if equipped)
Headlight high beam indicator“SET” indicator
Automatic High Beam
indicatorIntuitive parking assist
indicator (if equipped)
Front fog light indicator“AFS OFF” indicator
(if equipped)
“READY” indicator
(Flashes)
Slip indicator
EV drive mode indicatorVSC OFF indicator
Eco Driving Indicator Light
(Turns on or
flashes
quickly
*2)
“PCS” warning
(if equipped)
“ECO MODE” indicator
“PWR MODE” indicatorSRS airbag on-off indicator
For further information, refer to the Owner’s Manual.

92
What to do if...
■Starting the hybrid system
Depress the brake pedal.
Touch the Lexus emblem side of the
electronic key to the “POWER” switch.
If any of the doors is opened or
closed while the key is being touched
to the switch, an alarm will sound to
indicate that the start function cannot
detect the electronic key.
To change “POWER” switch modes:
Within 10 seconds of the buzzer sound-
ing, release the brake pedal and press
the “POWER” switch. Modes can be
changed each time the switch is pressed.
To start the hybrid system: Press the
“POWER” switch within 10 seconds
of the buzzer sounding, keeping the
brake pedal depressed.
In the event that the hybrid system still cannot be operated, contact your Lexus dealer.
If the electronic key battery becomes depleted, replace it with a new battery. For instruc-
tions on replacing the battery, refer to the Owner's Manual. If you need further assistance,
contact your Lexus dealer.

What to do if...
93
If the hybrid system doesn’t start
Make sure that the correct operating procedures have been followed.
Make sure that the brake pedal is firmly
depressed when attempting to start the hybrid
system.
Brake pedal
If the hybrid system still does not start, see the Owner's Manual for more information or
contact your Lexus dealer.