2011 Lexus HS250h rear view mirror

5
OverviewInstrument Panel
Without navigation system
With navigation system
Emergency flasher switch*1
Air
conditioning
system
P. 72
Air conditioning
system
P. 64
Emergency flasher
switch
*1
Navigation system P.44
Rear window and
outside rear view
mirror defogger
switch
*1
Rear window and
outside rear view
mirror defogger
switch
*2

7
OverviewInstrument Panel
VIEW switch 
Windshield wiper
de-icer switch
*1, *2
P. 35
VSC OFF switch*1
Trunk opener*1
Fuel filler door
opener
P.88
Rear sunshade
switch
*1
HUD (Head-up Dis-
play) position
adjustment switch

P. 33
HUD (Head-up Dis-
play) contrast adjust-
ment switch

P. 33
HUD (Head-up Display)
main switch
P. 33
Instrument panel light control switches*1
Outside rear view
mirror switches
*1
Headlight cleaner switch *1
NAVI switch 
P. 33

79
Garage Door Opener (If Equipped)
The garage door opener (HomeLink® Universal Transceiver) is manufactured under license
from HomeLink®.
■Programming the HomeLink® (for U.S.A. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be pro-
grammed to operate 3 different devices. Refer to the programming method below
appropriate for the device.
Overhead console type
Indicator light
Buttons
Inside rear view mirror type
Indicator light
Buttons
The garage door opener can be programmed to operate garage doors, gates, entry
doors, door locks, home lighting systems, security systems, and other devices.

80
■Programming HomeLink®
Overhead console type
Hold your hand-held transmitter within
3 inches of the HomeLink
® buttons.
Press and hold down the desired
HomeLink
® button.
For U.S.A. owners:
While pressing the HomeLink
® but-
ton, press and hold down the button
on the hand-held transmitter until the
indicator light changes from a slow to
a rapid flash.
For Canadian owners:
While pressing the HomeLink
® but-
ton, repeatedly press and release
(cycle) the button on the hand-held
transmitter every 2 seconds until the
indicator light changes from a slow to
a rapid flash.
If your garage door is of the rolling code
type:
Press the training button on the motor-
head unit in your garage.
Press and hold the vehicle’s programmed
HomeLink
® button for 2 seconds and
release it. Repeat this step once again.
If the door does not open, press and
release the same button once again.
■Programming other devices
For U.S.A. owners:
To program an entry gate, see the Owner's Manual.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all other devices, follow the same procedure as for garage door programming.
Inside rear view mirror type

81
■Operating HomeLink®
Overhead console type
Press the appropriate HomeLink® button.
The indicator light should come on.
Inside rear view mirror type
Safety Connect
■System components
Microphone
“SOS” button
LED light indicators
Safety Connect is a subscription-based telematics service that uses Global Positioning
System (GPS) data and embedded cellular technology to provide safety and security
features to subscribers. Safety Connect is supported by Lexus’ designated response
center, which operates 24 hours per day, 7 days per week.
Safety Connect service is available by subscription on select, telematics hardware-
equipped vehicles.