2011 Lancia Delta technical specifications

205/55 R16-91V
125/90 R15-96
195/55 R16-91VXL
205/55 R16-91V
225/45 R17-91W
225/40 R18-92W2.7 2.5
2.7 2.5
2.7/2.8 (*) 2.5
2.9/3.1 (*) 2.7
264TECHNICAL SPECIFICATIONS
2.4 2.2
2.4 2.2
2.4 2.2
2.6 2.4
Add +0.3 bar to the prescribed pressure when the tyres are warm. Check correct pressure on a cold tyre.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
When travelling at speeds over 160 km/h, inflate the tyres to the values specified for fully laden conditions.
The TPMS is not fitted with 195/55 R16 91V tyres.
COLD TYRE PRESSURES (bar)
2.2
4.2
SPACE-SAVER/SPARE WHEEL
Size Inflation pressure
Size STANDARD TYRES
Medium load Full load
Front Rear Front Rear
(*) 1.9 Twin Turbo Multijet and 2.0 Multijet versions

TECHNICAL SPECIFICATIONS265
6
fig. 6
L0E0101m
DIMENSIONS
452010172700
(*) Small variations in size are possible depending on the dimensions of the rims1499 (*)15381531
Boot capacity
Capacity with vehicle unladen (VDA standards) ............................. 380 dm
3
Maximum capacity ...........................................................................465 dm3
Dimensions are expressed in mm and refer to the car equipped with its the tyres
supplied. Height is measured with car unladen.
1797
ABCDEFGH
803

203 266
TECHNICAL SPECIFICATIONS
195210
PERFORMANCE
Maximum speeds after initial car use, in km/h.
214194222
1.4 Turbo Jet 120 HP 1.4 Turbo Jet 150 HP 1.4 Turbo Multi Air 1.6 Multijet 1.9 Twin Turbo 2.0 MultijetMultijet

1410
570
1090
950
1980
1300
600
80
601320
570
1090
950
1890
1300/600()
600
80
60
TECHNICAL SPECIFICATIONS267
6
WEIGHTS
Weights (kg) 1.4 Turbo Jet
1.4 Turbo Multi Air 1.6 Multijet
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will
decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carry-
ing platform within the maximum permitted loads.
() 1.4 Turbo Multi Air version

1430
570
1150
950
2000
1300
500
80
601430
570
1150
950
2000
1300
500
80
60
268TECHNICAL SPECIFICATIONS
Weights (kg) 1.9 Twin Turbo Multijet 2.0 Multijet
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will
decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carry-
ing platform within the maximum permitted loads.

57 –
8/10 –
6.0 –
3.1 2.65
3.5 3.0
1.99 1.8
–0.8
6–57 –
8/10 –
5,9 –
2.75 2.4
2.9 2.55
2.4 2.0
–0.8
6–
TECHNICAL SPECIFICATIONS269
6
Unleaded petrol not less than
95 R.O.N (EN228 specifications)
Mixture of demineralised
water and PARAFLU
UP
in 50-50 proportion (▲)
SELENIA K P.E.
SELENIA WR P.E. (❍)
TUTELA CAR MATRYX ()
TUTELA TRANSMISSION
GEARFORCE (❍)
TUTELA TOP 4
Water and liquid mixture
TUTELA PROFESSIONAL SC 35
CAPACITIES
(▲) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLUUP
and 40% distilled water.
() 1.4 Turbo Jet 150 HP version
(❍) 1.4 Turbo Jet 120 HP and 1.4 Turbo Multi Air versions
1.4 Turbo Jet 1.4 Turbo MultiAir Recommended fuelslitres kg litres kg and original lubricants
Fuel tank:including a reserve of:
Engine cooling system:
Engine sump:Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit with ABS:
Windscreen/rear window washer
fluid reservoir:

57 –
8/10 –
7.1 –
4.3 3.6
4.9 4.1
3.1 2.7
–0.8
6–Diesel fuel for motor vehicles
(Specification EN590)
Mixture of 50% demineralised
water and 50% PARAFLU
UP(▲)
SELENIA WR P.E.
TUTELA CAR TECHNYX (❍)
TUTELA CAR MATRYX ()
TUTELA TOP 4
Water and liquid mixture
TUTELA PROFESSIONAL SC 35
57 –
8/10 –
7.1 –
4.3 3.6
4.9 4.1
1.87 1.7
–0,8
6–
270TECHNICAL SPECIFICATIONS
(▲) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLUUPand
40% distilled water.
(❍) 1.6 Multijet version
() 1.9 Twin Turbo Multijet and 2.0 Multijet versions
1.6 Multijet 1.9 Twin Turbo Multijet Recommended fuels
2.0 Multijet and original lubricants
litres kg litres kg
Fuel tank:including a reserve of:
Engine cooling system:
Engine sump:Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit with ABS:
Windscreen/rear window washer
fluid reservoir:

Synthetic based lubricant grade
SAE 5W-40 ACEA C3
FIAT 9.55535-S2 certification.
Synthetic based lubricant grade
SAE 5W-30.
FIAT 9.55535-S1 cerification.
Synthetic based lubricant grade
SAE 5W-40
FIAT 9.55535-Z2 certification.
TECHNICAL SPECIFICATIONS271
6
SELENIA K P.E.
Contractual Technical
Reference No. F603.C07
SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07
SELENIA SPORT 5W-40
Contractual Technical
Reference No. F716.B08
For 1.6 Multijet and 2.0 Multijet diesel engines, in the event of an emergency in which the original products are not available, lu-
bricants with at least ACEA C2 performance are acceptable; however, in this case optimum engine performance is not guaranteed
and the lubricants should be replaced with recommended products as soon as possible at a Lancia Dealership.
The use of products with specifications below ACEA C3 standards for petrol engines and ACEA C2 standards for 1.6 Multijet and
2.0 Multijet diesel engines could cause damage to the engine not covered under the warranty.
For the 1.9 Twin Turbo Multijet engine, only use lubricants with FIAT Classification 9.55535-Z2; the use of lower specification
products could cause engine damage not covered by the warranty.
For petrol versions with Multi Air system, the use of lubricants with specifications below ACEA C3 and SAE grade other than
5W-40 could cause damage to the engine not covered by the warranty.
As per the Scheduled
Servicing Plan
As per the Scheduled
Servicing Plan
As per the Scheduled
Servicing Plan
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND SPECIFICATIONS
Use Fluid and lubricant features Genuine Replacement
for correct use of the car fluids and lubricants interval
Petrol engine
lubricant
Lubricant for
diesel engines
(1.6 Multijet
and 2.0 Multijet)
Lubricant for
diesel engines
(1.9 Twin
Turbo Multijet)