When you have found your ideal driving
position, the vehicle can memorise the settings
for future use.
1.Press the Mbutton. The red LED will
illuminate for a five second period.
2. Press button 1,2, or \fto store your driving
position.
The LED will extinguish and a chime will sound
to confirm that the settings have been
memorised. If the ignition is on, the message
center will display a confirmation message.
5
Operating note
A seat position will only be memorised during the
five second period that the LED is illuminated.
An existing memory setting can be over\bwritten
with a new memory position.
Driving position memory
Recalling a seat position
To recall a memorised seat position simply
press and hold button 1,2, or \funtil the seat
has finished moving.
Convertible top
The vehicle must be stationary with the engine
running.
Note: The luggage separator MUST be in the
correct position before the top will retract.
• To open, press and hold the REAR of switch 1
in the overhead console.
An audible chime indicates start of opening.
Rear windows will open, the top unlatches and
starts to move. Front windows will fully lower.
When the process is complete another audible
chime will be given.
• Release the switch.
• To close, press and hold the FRONT of switch 1.
Convertible top operation
• DO NOT press the engine START STOP
button while the top is operating. Doing so will
cause the system to lose its position memory.
• DO NOT operate the top while the vehicle is in motion. Doing so may damage the top and/or its
operating mechanism.
• DO NOT open the trunk while the top is operating. This will cause the operation to stop.
Once again an audible chime is given and the
windows will lower before the roof moves back
into position. When the process is complete
another audible chime will be given.
• Release the switch.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 5 1
WhenReverse is selected, the rear and front
parking aids are activated.
The touch\bscreen will display a representation of
your vehicle and indicates any obstruction
detected. A coloured bar will show the
approximate distance from the vehicle to the
obstruction. An audible alert is also triggered
and will increase in frequency as the obstruction
is approached.
When moving forward into a space, enable the
sensors with the parking aid switch.
Alternatively, first select Reverse thenDrive.
Volume of the audible alert can be changed via
the touch\bscreen. From the Home screen, select
Vehicle, then Veh. settings, thenParking .
Parking aid will cancel when forward speed
exceeds \f0 mph (\f6 km/h).
\f\f
Parking aids
Cancelling the pop up screen
To return to the previous screen view before
parking assist is automatically cancelled, touch the
screen within the pop\bup area.
Parking aid care points
Sensors may activate when water, snow or ice are
detected on the surface of the sensors. This is
entirely normal and regular cleaning will assist
performance.
Parking aid switch
1. Press to disable the parking aid. Press again to enable.
An LED in the switch illuminates whenever
the system is on.
Garage door opener
The button set 1in the roof console can be
programmed to transmit radio frequencies that
can operate external devices such as garage
doors, entry gates, security systems, etc.
See the Owner’s Handbook for full operating
instructions.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 11Parkingaid alert 1 1
