2
Vehicle access\bEngine starting
Jaguar Smart Key
Keyless entry
Leaving the vehicle
The vehicle WILL NOT automatically lock or arm
the alarm.
To lock and alarm the vehicle with a keyless action
the Jaguar Smart Key must be outside the vehicle.
Press the door handle button once to single\block.
Alternatively, use the Jaguar Smart Key.
Entering the vehicle
With keyless entry, operation of a locked door
handle or pressing the trunk release button will
allow access if the Jaguar Smart Key is within
approximately 39
inches (\fm) of that
entry point.
The Jaguar Smart
Key buttons do not
need to be pressed and it can be concealed in
clothing or even carried in a non metallic carrier.
The Jaguar Smart Key buttons can still be used
to unlock the vehicle.
Drive away door locking
When enabled, the trunk and doors will
automatically lock when the vehicle's forward
speed exceeds 5 mph (7 km/h).
This feature can be disabled/enabled via the
touch\bscreen. From the
Homescreen, select
Vehicle, then Veh. settings, thenSecurity.
Unlocking mode alternatives
Single point entry will disarm the alarm and
unlock only the driver’s door with a single press. A
second press unlocks the passenger door and
trunk.
Multi point entry will disarm the alarm and unlock
both doors and trunk with a single press.
To change between modes, press the lock and
unlock buttons simultaneously for three seconds.
The hazard lamps will flash twice to confirm the
change.
• Press once to lock the vehicle and arm the alarm.
• Press and hold to close any open windows (Global closing if enabled).
• Press once to disarm the alarm, unlock both doors and unlock the trunk.
• Press and hold to open the windows (Global opening if enabled) .
• Press once to switch the headlamps on for 25 seconds. Press again to
switch off.
• Press to disarm the alarm and unlock the trunk.
• Press and hold or press three times in three seconds to activate/cancel the
panic alarm .
1.Emergency key blade release button.
2. Emergency key blade.
Note: See the Owner’s Handbook for use.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 2
3
Opening the trunk
Engine start stop
TheSTART STOP button is operational only
when the Jaguar Smart Key is inside the
vehicle.
Ignition only on:
• A single press of the START STOP
button will switch on the ignition.
• A second press will switch off the ignition.
Engine start:
• With the footbrake depressed and the gear selector in Park, press and release the
START STOP button to start the engine.
The JaguarDrive Selector will rise from the
center console in readiness for gear selection.
• With the gear selector in Park, press the
button again to stop the engine and switch off
the ignition.
Cold climate starting
In extreme low temperatures, there may be a
delay of up to \f2 seconds between the START
STOP button being pressed and the engine
cranking. Ensure the footbrake remains
depressed. Do NOT press the START STOP
button again. Cranking time will be increased.
Operating note
The START STOP button must be pressed to stop
the engine. If not, it will continue to run even if the
Jaguar Smart Key is removed from the vehicle.
1. Press the release button indicated.
Front windows
The front windows can be fully opened or closed
with a single operation of the switch.
• To open a window, press the respective
switch briefly. Press the switch again to stop
the window from fully opening.
• To close a window, pull the switch up briefly. Pull the switch again to stop the window from
fully closing.Reminder Global closing
If a front window has been left open when leaving
the vehicle and global closing is enabled, press
and hold the Jaguar Smart Key lock button to close
them. Alternatively, press and hold the button on
the door handle.
2. Alternatively, press the button on the facia.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 31 2
\f4
Navigation
Setting a destination
Turn by turn navigation
Setting a destination
1.Select Navigation from the Home screen,
and when prompted, touch Agreeto access
the initial map screen.
2. From the navigation Menuscreen, select
Destination Entry .
\f. Touch either AddressorZip code.
4. With Address selected, touch Town, then
use the on\bscreen keypad to enter address
details. As each part of the address is
displayed, select from the list to confirm.
With Zip code selected, use the keypad to
enter a zip code. Use the long spacebar to
enter any required spaces.
5. When entry is complete, touch OK.
6. Touch Destin ation to begin calculation of the
route options.
7. The screen displays Route 1. To view
alternative routes touch \f Route. To use an
alternative route, touch one of the selections.
8. Touch Startto commence guidance.
The selected route will be displayed and
guidance will begin. When your destination is
reached, voice and visual confirmation is given.
The navigation system has features, which include: Search area\b\fountry selection, \fompass, Points of
Interest, Memory points, Split screen, Previous destination and Route preferences.
For more information, refer to the Owner’s Handbook.
Touch the icon to hear the last voice
instruction. To deselect voice guidance go to
the Navigation Menu screen then select Auto
Voice Guidance Off.
As well as the main navigation touch\bscreen,
there is a facility that utilises the message
center screen in the instrument pack. When a
destination is set and guidance is commenced,a simplified graphic guide is displayed giving
basic turn by turn information about the next
part of the journey.
Cancelling guidance
To cancel guidance, press Menu,Route
Options and then Cancel Guidance.
If the map is moved away from your
current location, the position icon will be
replaced by a touch button in the top left of the
screen. Touch to bring the current location map
back into view.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 14RUXTO
NDR
WASHINGTONST
HIPLEYRD NBeec hwood Street
WASHINGTON WAS HINGTONDEL AW ARE DELA WARE PHILADELPHIA PHILA DELPHIA