6
Comfort adjustments
Climate control basic functions
Operation via the touch screen allows access to other features e.g. heated seats.
1. AUTO (automatic) mode
Press to select automatic operation of the
climate control system. The climate control will
automatically adjust heat, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s) and reduce fogging
without constant manual adjustments.
2. Air recirculation
Press to select. A symbol will appear on the
touch\bscreen and an LED in the button will
illuminate.
Press again to deselect or press theAUTO
button.
\f. Temperature control
Press the red buttons to increase temperature
and the blue buttons to decrease temperature.
Temperatures in the separate passenger and
driver zones will automatically synchronise if HI
or LO is selected via the driver’s side control.
4. Heated front screen
The screen heaters will only operate when the
engine is running.
5. Heated rear screen and door mirrors
The rear screen heater button also controls the
door mirror heaters.
6. Front screen defrost\bdefog
Press to remove frost or heavy fogging from the
front screen. To deselect defrost mode, press
the DEF orAUTO buttons.
7. Blower speed
Adjust blower speed with the rotary control. Any
adjustment will cancel AUTOmode.
System off
Turn off by first selecting Climateon the touch\b
screen. Touch the Climate icon.
Touch again to turn on.
Recommended mode
Select AUTOas the normal operating mode. This
will help prevent window fogging and reduce
odours from the climate control system.
External water deposits
The climate control system removes moisture from
the air and deposits excess water beneath the
vehicle. Puddles may form, but this is normal and
no cause for concern.
Seat belts and air bags
A warning indicator on the instrument
pack will illuminate to warn you that the
driver's and/or front passenger's seat belt
is unbuckled. Dependent upon specification this
may be accompanied by a warning chime.
Child seats
It is important to remember that your child’s
weight, rather than age, determines the type of
seat that is required.
Refer to Child Safety in the Owner’s Handbook
to determine the correct seat for your child.The front passenger seat occupancy sensor
determines the state of seat occupancy and
sets the air bag status to suit:
• Seat unoccupied \b air bag
deactivated and
indicator off.
• Seat occupied \b air bag activated
and indicator off.
• Low weight occupant or
object \b air bag deactivated and indicator on.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 6 71
2
33
645
8
Driving
Exterior lighting\bTrip computer
1. Front screen wash/wipe.
2. AUTO/intermittent wipe.
\f. Slow speed.
4. Fast speed.
5. With position2selected, rotate the collar to
adjust speed of intermittent wipe or rotate to
AUTO to select auto wipe controlled by the
rain sensor.
Wipers and washers
Move the lever forward for high beam and back
for high beam flash. Move it up or down to
operate the direction indicators. A brief push up
or down will flash the indicators three times.
Rotate the collar to the first position to select
side lamps.
Second position is headlamps.
Next position is Autolamps. Sensor controlled
to switch side lamps and low beam
headlamps on or off as appropriate.
Autolamps combined with exit delay.
Headlamps can remain on to illuminate the
immediate vicinity for a set period after
leaving the vehicle. There are three time
setting positions. Press the button on the end of the lever to
cycle through the trip computer displays in
the message center.
Autolamps
If AUTO mode is selected and the front screen
wipers are operated for more than 20 seconds, the
exterior lamps will be switched ON automatically
for a minimum of two minutes.
Instrument pack warning lamps
Low tire pressure
Air bag fault
Rear fog lamp on
Flashing lamp \b
Dynamic Stability
Control (DSC) activeSeat belt reminder
Forward alert active
Automatic Speed Limiter
(ASL) active
ABS fault
Parking brake on or
system fault \b Canada
only
Parking brake on or
system fault \b USA only
Adaptive Cruise Control
active
Engine malfunction
The following lamps will illuminate during normal driving to indicate that a related system or feature is
operating. If any other warning lamp illuminates, refer to the Owner’s Handbook.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 81
2
3
4
5 BRAKE
