Operating note
To prevent automatic movement of the steering
column, turn the control to theCOLUMNposition.
4
Comfort adjustments
Steering column adjustment
Steering wheel adjustment
• Turn the control to COLUMNthen move the
control to adjust the height and reach.
Exit mode
• With the control set to AUTO, the steering column will move to provide greater clearance
for exiting when the driver's door is opened.
Entry mode
After the driver's door is closed and the START
STOP button is pressed the column will return to
its previous position.
Seat adjustment
Seat adjustment may vary dependent upon
vehicle specification.
The control panel is on the door.
1. Cushion extension. Forward and back.
2. Lumbar support. 4 way switch \b Up inflates upper lumbar, Down inflates lower lumbar,
Forward inflates both lumbars and Back
deflates both lumbars.
\f. Recline adjustment. Forward and back.
4. Side bolster adjustment. Rotate to adjust in or out.
5. Cushion height \b front of switch, cushion front tilt \b rear of switch.
Operating note
The controls for seat heating and cooling are
accessed via the touch\bscreen.
Door mirrors adjustment
Door mirror adjustment
1.Press to select a mirror.
2. Use to adjust the mirror position.
Powerfold mirrors
• Press both buttons 1simultaneously to fold the mirrors
inward. Press again to unfold.
The mirrors can be programmed to unfold/fold automatically
at vehicle unlock/lock. See your Owner’s Handbook.
Mirror dip when reversing
Reverse dip can be enabled or disabled via the touch screen.
From the Homescreen, select Vehicle, thenVeh. settings,
then Parking.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 4 321
54 2
1
1
