2011 INFINITI QX56 diagram

BCS-2
BATTERY SAVER ....................................................29
BATTERY SAVER : CONSULT-III Function (BCM
- BATTERY SAVER) ........................................... ...
29
TRUNK ................................................................... ...30
TRUNK : CONSULT-III Function (BCM - TRUNK) ...30
THEFT ALM ........................................................... ...30
THEFT ALM : CONSULT-III Function (BCM -
THEFT) ...................................................................
30
RETAIND PWR ...................................................... ...31
RETAIND PWR : CONSULT-III Function (BCM -
RETAINED PWR) ...................................................
31
SIGNAL BUFFER ................................................... ...31
SIGNAL BUFFER : CONSULT-III Function (BCM
- SIGNAL BUFFER) ................................................
31
ECU DIAGNOSIS INFORMATION ..............33
BCM ................................................................ ...33
Reference Value .................................................. ...33
Fail-safe ..................................................................54
DTC Inspection Priority Chart ..............................56
DTC Index ..............................................................57
WIRING DIAGRAM .....................................60
BCM ................................................................ ...60
Wiring Diagram .................................................... ...60
BASIC INSPECTION ...................................67
INSPECTION AND ADJUSTMENT ................ ...67
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT (BCM) ......................................... ...
67
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT (BCM) : Description ....................
67
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT (BCM) : Work Procedure ............
67
CONFIGURATION (BCM) ...................................... ...67
CONFIGURATION (BCM) : Description .................67
CONFIGURATION (BCM) : Work Procedure .........68
CONFIGURATION (BCM) : Configuration list ........69
DTC/CIRCUIT DIAGNOSIS ........................70
U1000 CAN COMM ........................................ ...70
Description ........................................................... ...70
DTC Logic ...............................................................70
Diagnosis Procedure ...............................................70
U1010 CONTROL UNIT (CAN) .........................71
DTC Logic ............................................................ ...71
Diagnosis Procedure ...............................................71
U0415 VEHICLE SPEED ...................................72
Description ........................................................... ...72
DTC Logic ...............................................................72
Diagnosis Procedure ...............................................72
B2562 LOW VOLTAGE .....................................73
DTC Logic ............................................................ ...73
Diagnosis Procedure ...............................................73
B26E7 TPMS CAN COMM ............................. ...74
DTC Logic ............................................................ ...74
Diagnosis Procedure ...............................................74
POWER SUPPLY AND GROUND CIRCUIT .....75
Diagnosis Procedure ............................................ ...75
COMBINATION SWITCH OUTPUT CIRCUIT ...76
Diagnosis Procedure ...............................................76
COMBINATION SWITCH INPUT CIRCUIT .......78
Diagnosis Procedure ............................................ ...78
SYMPTOM DIAGNOSIS ............................80
COMBINATION SWITCH SYSTEM SYMP-
TOMS .............................................................. ...
80
Symptom Table .................................................... ...80
REMOVAL AND INSTALLATION ..............81
BCM ................................................................ ...81
Removal and Installation ...................................... ...81
COMBINATION SWITCH ..................................82
Exploded View ..................................................... ...82
Removal and Installation .........................................82
Revision: 2010 May2011 QX56

BCS-6
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
BODY CONTROL SYSTEM
BODY CONTROL SYSTEM : System DescriptionINFOID:0000000006274789
OUTLINE
 BCM (Body Control Module) controls the various electrical components. It inputs the information required to
the control from CAN communication and the signal received from each switch and sensor.
 BCM has combination switch reading function for reading the operation status of combination switches (light,
turn signal, wiper and washer) in addition to a function fo r controlling the operation of various electrical com-
ponents. It also has the signal transmission function as the passed point of signal and the power saving con-
trol function that reduces the power c onsumption with the ignition switch OFF.
 BCM is equipped with the diagnosis function that perfo rms the diagnosis with CONSULT-III and various set-
tings.
BCM CONTROL FUNCTION LIST
System Reference
Combination switch reading system BCS-7, "
COMBINATION SWITCH READING SYSTEM : System
Diagram"
Signal buffer system
BCS-10, "SIGNAL BUFFER SYSTEM : System Diagram"
Power consumption control systemBCS-11, "POWER CONSUMPTION CONTROL SYSTEM : Sys-
tem Diagram"
Auto light system
EXL-11, "AUTO LIGHT SYSTEM : System Diagram"
Turn signal and hazard warning lamp systemEXL-18, "TURN SIGNAL AND HAZARD WARNING LAMP SYS-
TEM : System Diagram"
Headlamp system
EXL-10, "HEADLAMP SYSTEM : System Diagram"
Daytime running light systemEXL-14, "DAYTIME RUNNING LIGHT SYSTEM : System Dia-
gram"
Parking, license plate, side maker and tail lamps system
EXL-18, "PARKING, LICENSE PLATE, SIDE MARKER AND
TAIL LAMP SYSTEM : System Diagram"
Front fog lamp system
EXL-20, "FRONT FOG LAMP SYSTEM : System Diagram"
Exterior lamp battery saver systemEXL-20, "EXTERIOR LAMP BATTERY SAVER SYSTEM : Sys-
tem Diagram"
Interior room la
mp control system INL-6, "INTERIOR ROOM LAMP CONTROL SYSTEM : System
Diagram"
Interior room lamp battery saver system
INL-9, "INTERIOR ROOM LAMP BATTERY SAVER SYSTEM :
System Diagram"
Front wiper and washer systemWW-7, "FRONT WIPER AND WASHER SYSTEM : System Dia-
gram"
Rear wiper and washer systemWW-10, "REAR WIPER AND WASHER SYSTEM : System Dia-
gram"
Headlamp washer system
WW-13, "HEADLAMP WASHER SYSTEM : System Diagram"
Warning chime systemWCS-6, "WARNING CHIME SYSTEM : System Diagram"
Power door lock systemDLK-16, "System Diagram"
Infiniti Vehicle immobilizer System (IVIS)SEC-15, "INFINITI VEHICLE IMMOBILIZER SYSTEM-NATS :
System Diagram"
Vehicle security systemTheft warning alarm
SEC-17, "VEHICLE SECURITY SYSTEM : System Diagram"Panic alarm
Rear window defogger system DEF-6, "
System Diagram"
Intelligent Key system/engine start systemDLK-18, "INTELLIGENT KEY SYSTEM : System Diagram"
Power window system PWC-8, "SystemDiagram"
Retained accessory power (RAP) systemPWC-8, "System Description"
Revision: 2010 May2011 QX56

BCS
SYSTEMBCS-7
< SYSTEM DESCRIPTION >
C
DE
F
G H
I
J
K L
B A
O P
N
COMBINATION SWITCH READING SYSTEM
COMBINATION SWITCH READING SYSTEM : System DiagramINFOID:0000000006274790
NOTE:
*: TAIL LAMP switch links lighting switch 1ST and 2ND positions.
COMBINATION SWITCH READING S
YSTEM : System DescriptionINFOID:0000000006274791
OUTLINE
 BCM reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the
status of each switch.
 BCM has a combination of 5 output terminals (OUTPUT 1 - 5) and 5 input terminals (INPUT 1 - 5). It reads a
maximum of 20 switch status.
COMBINATION SWITCH MATRIX
Combination switch circuit
NOTE:
*: TAIL LAMP switch links lighting switch 1ST and 2ND positions.
Combination switch INPUT-OUTPUT system list
JMMIA0499GB
JMMIA0500GB
System INPUT 1 INPUT 2 INP UT 3 INPUT 4 INPUT 5
OUTPUT 1 — FR WASHER FR WIPER LOW TURN LH TURN RH
OUTPUT 2 FR WIPER HI — FR WIPER AUTO PASSING HEADLAMP 1
Revision: 2010 May2011 QX56

BCS-10
< SYSTEM DESCRIPTION >
SYSTEM
NOTE:
For details of wiper volume dial position, refer to WW-7, "
FRONT WIPER AND WASHER SYSTEM : System Description".
SIGNAL BUFFER SYSTEM
SIGNAL BUFFER SYSTEM : System DiagramINFOID:0000000006274792
SIGNAL BUFFER SYSTEM : System DescriptionINFOID:0000000006274793
OUTLINE
BCM has the signal transmission function that output s/transmits each input/received signal to each unit.
Signal transmission function list
6 OFF ON ON
7 OFF ON OFF
Wiper volume
dial position Switch status
WIP VOLUME 1 WIP VOLUME 2 WIP VOLUME 3
JMMIA0381GB
Signal name Input Output Description
 Ignition switch ON signal
 Ignition switch signal Push-button ignition switch
(Push switch) IPDM E/R (CAN)
 Driver seat control unit (CAN)
 Pre-crash seat
belt control
unit (CAN) Inputs the push-button ignition
switch (push switch) signal and
transmits the ignition switch sta-
tus judged with BCM via CAN
communication.
Door switch signal Any door switch  Combination meter (CAN)
 IPDM E/R (CAN)
 Driver seat control unit (CAN)
 Pre-crash seat
belt control
unit (CAN) Inputs the door switch signal
and transmits it via CAN com-
munication.
Oil pressure switch signal IPDM E/R (CAN) Combination meter (CAN) Transmits the received oil pres-
sure switch signal via CAN
communication.
Revision: 2010 May2011 QX56

BCS
SYSTEMBCS-11
< SYSTEM DESCRIPTION >
C
DE
F
G H
I
J
K L
B A
O P
N
POWER CONSUMPTION CONTROL SYSTEM
POWER CONSUMPTION CONTRO
L SYSTEM : System DiagramINFOID:0000000006274794
POWER CONSUMPTION CONTROL SYSTEM : System DescriptionINFOID:0000000006274795
OUTLINE
 BCM incorporates a power saving control function t hat reduces the power consumption according to the
vehicle status.
 BCM switches the status (control m ode) by itself with the power saving control function. It performs the sleep
request to each unit (IPDM E/R, combination meter, dr iver seat control unit, automatic back door control
module, pre-crash seat belt control unit and CAN gat eway) that operates with the ignition switch OFF.
Normal mode (wake-up)- CAN communication is normally performed with other units
- Each control with BCM is operating properly
CAN communication sleep mode (CAN sleep)- CAN transmission is stopped
- Control with BCM only is operating
Stop lamp switch signal Stop lamp switch TCM (CAN) Inputs the stop lamp switch 1
signal and stop lamp switch 2
signal, and transmits it via CAN
communication.
Low tire pressure warning lamp
signal Low tire pressu
re warning con-
trol unit Combination meter (CAN)Transmits the received low tire
pressure warning signal via
CAN communication.
Buzzer request signal Low tire pressu
re warning con-
trol unit Combination meter (CAN)Transmits the received buzzer
request signal via CAN commu-
nication.
Horn request signal Low tire pressu
re warning con-
trol unit IPDM E/R (CAN)Received the horn request sig-
nal, transmits the horn reminder
signal via CAN communication.
Signal name Input Output Description
JMMIA0382GB
Revision: 2010 May2011 QX56

BCS-60
< WIRING DIAGRAM >
BCM
WIRING DIAGRAM
BCM
Wiring DiagramINFOID:0000000006274823
JCMWM8293GB
Revision: 2010 May2011 QX56

BCS
BCM
BCS-61
< WIRING DIAGRAM >
C
D E
F
G H
I
J
K L
B A
O P
N
JCMWM8294GB
Revision: 2010 May2011 QX56

BCS-62
< WIRING DIAGRAM >
BCM
JCMWM8295GB
Revision: 2010 May2011 QX56