2011 INFINITI QX56 center console

TM-178
< REMOVAL AND INSTALLATION >[7AT: RE7R01B]
CONTROL CABLE
CONTROL CABLE
Exploded ViewINFOID:0000000006226894
Removal and InstallationINFOID:0000000006226895
REMOVAL
1. Remove center console assembly . Refer to
IP-25, "Removal and Installation".
2. Remove cluster lid C cover and instrument center finisher LH. Refer to IP-14, "
Removal and Installation".
3. Shift selector lever in “P” position.
4. Remove control cable from A/T shift selector assembly.
5. Remove control cable from manual lever and control cable mounting bracket.
1. Control cable 2. A/T shift selector assembly 3. Lock plate
4. Manual lever 5. Washer 6. Lock plate
7. Bracket 8. A/T assembly
A. Retainer
Refer to GI-4, "
Components" for symbols in the figure.
JSDIA1589GB
Revision: 2010 May2011 QX56

TOW MODE SWITCHTM-181
< REMOVAL AND INSTALLATION > [7AT: RE7R01B]
C
EF
G H
I
J
K L
M A
B
TM
N
O P
TOW MODE SWITCH
Removal and InstallationINFOID:0000000006226898
NOTE:
Tow mode switch is integrated in to SNOW MODE/T OW MODE/VDC OFF switch assembly (2WD models) or
4WD switch assembly (4WD models).
REMOVAL
1. Remove console finisher assembly from center console assembly. Refer to IP-25, "Removal and Installa-
tion".
2. Disconnect SNOW MODE/TOW MODE /VDC OFF switch assembly (2WD models) or 4WD switch
assembly (4WD models) harness connector.
3. Press SNOW MODE/TOW MODE/VDC OFF switch a ssembly (2WD models) or 4WD switch assembly
(4WD models) fixing pawls, and remove SNOW MO DE/TOW MODE/VDC OFF switch assembly (2WD
models) or 4WD switch assembly (4WD models) from console finisher assembly.
INSTALLATION
Install in the reverse order of removal.
Revision: 2010 May2011 QX56

DUCT AND GRILLEVTL-11
< REMOVAL AND INSTALLATION >
C
DE
F
G H
J
K L
M A
B
VTL
N
O P
2. Remove front defroster nozzle. Refer to VTL-11, "FRONT DEFROSTER NOZZLE : Removal and Installa-
tion".
3. Remove fixing screws, and then remove upper ventilator duct.
INSTALLATION
Install in the reverse order of removal.
FRONT DEFROSTER NOZZLE
FRONT DEFROSTER NOZZLE : Removal and InstallationINFOID:0000000006276293
REMOVAL
1. Remove instrument panel assembly. Refer to VTL-8, "Exploded View".
2. Remove fixing screws, and then remove front defroster nozzle.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER NOZZLE
SIDE DEFROSTER NOZZLE : Removal and InstallationINFOID:0000000006276294
REMOVAL
1. Remove instrument panel assembly. Refer to IP-14, "Removal and Installation".
2. Remove fixing screw, and then remove side defroster nozzle.
INSTALLATION
Install in the reverse order of removal.
FLOOR DUCT 1
FLOOR DUCT 1 : Removal and InstallationINFOID:0000000006276295
REMOVAL
1. Remove center console assembly. Refer to IP-25, "Removal and Installation".
2. Remove floor duct 1.
INSTALLATION
Install in the reverse order of removal.
FLOOR DUCT 2
FLOOR DUCT 2 : Removal and InstallationINFOID:0000000006276296
REMOVAL
1. Pull up front of front floor carpet of securing work space. Refer to INT-25, "FRONT FLOOR CARPET :
Removal and Installation".
2. Remove fixing clip, and then remove floor duct 2.
INSTALLATION
Install in the reverse order of removal.
FLOOR DUCT 3
FLOOR DUCT 3 : Removal and InstallationINFOID:0000000006276297
REMOVAL
1. Pull up front of front floor carpet of securing work space. Refer to INT-25, "FRONT FLOOR CARPET :
Removal and Installation".
2. Remove mounting bolt, and then remove floor duct 1.
INSTALLATION
Revision: 2010 May2011 QX56