SECOND SEATSE-133
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
5. Remove the seat cushion frame. 1. Remove the fixing screw and then remove seat cushion under cover.
2. Remove the seatback control wire (A) and seat cushion control wire (B).
3. Remove the seatback control wire installed to seat cushion frame.
4. Remove the mounting bolts and then remove seat cushion frame.
6. Remove the seat belt buckle. Refer to SB-16, "
SEAT BELT BUCKLE : Removal and Installation".
7. Remove the seat cushion carpet.
8. Remove the seat cushion hinge cover Disengage pawls on front side of seat cushion hinge cover.
Disengage pawls on rear side of seat cushion hinge cover.
9. Remove the mounting bolts and then remove seat hinge assembly.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the
seat frame.
Adjust the cable when installing the seatb ack control wire and seat cushion control wire.
Refer to SE-134, "
Adjustment".
ARMREST
ARMREST : Disassembly and AssemblyINFOID:0000000006217433
DISASSEMBLY
1. Remove the mounting bolts. Remove the armrest out er bracket and the armrest inner cover RH from the
armrest assembly.
2. Remove the fixing screws of the cup holder. Remove the cup holder from the armrest assembly.
JMJIA3886ZZ
: Pawl
JMJIA3883ZZ
Revision: 2010 May2011 QX56
THIRD SEATSE-139
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
K L
M A
B
SE
N
O P
Install in the reverse order of removal.
Disassembly and AssemblyINFOID:0000000006217437
SEATBACK
Disassembly
1. Remove the hinge cover. 1. Remove the seat cushion trim and seat cushion pad from seat cushion frame.
2. Remove the fixing screws, and then remove the hinge cover.
2. Remove the mounting bolts, and then remove the seatback assembly.
3. Open fastener (A) of seatback trim. LH side
RH side
4. Remove clips that retain seatback board and seatback trim.
5. Remove the seatback board and the clips. 1. Slide and align the clips (B) to the holes on the seatback board (A) as shown in the figure, and then remove the seat-
back board (A).
2. Remove the clips after removing the seatback board.
6. Remove the seatback trim and seatback pad.
JMJIA4328ZZ
JMJIA4329ZZ
JMJIA4076ZZ
Revision: 2010 May2011 QX56
