2011 INFINITI QX clock

1. Side ventilator (P. 4-30)
2. Meters and gauges (P. 2-5)
3. Hazard warning flasher switch (P. 2-43)
4. Center ventilator (P. 4-30)5. Center multi-function control panel
(P. 4-3)
— Vehicle information and setting
buttons (P. 4-7) 6. Center display
— Around View Monitor (P. 4-19)
— Navigation system**
— DVD player operation (P. 4-58)
7. Clock (P. 2-51)
8. Defroster switch (P. 2-35)/Deicer switch* (P. 2-36)
9. Front passenger supplemental air bag (P. 1-50)
10. Fuse box (P. 8-23)
11. Parking brake (P. 5-19)
12. Hood release handle (P. 3-18)
13. Steering wheel — Horn (P. 2-44)
— Driver supplemental air bag (P. 1-50)
— Power steering system (P. 5-94)
14. Push-button ignition switch (P. 5-10)
15. Climate controlled seat switch* (P. 2-46)/Heated seat switch* (P. 2-44)
16. Remote tip-up 2nd row seat switch* (P. 1-8)
17. Heated steering wheel switch (P. 2-43)
18. Power outlet (P. 2-52)
19. Front passenger air bag status light (P. 1-57)
20. Cup holder (P. 2-54)
SSI0733
INSTRUMENT PANEL
0-8Illustrated table of contents

Tow mode switch................................. 2-49
Intelligent Brake Assist (IBA) OFF switch
(if so equipped) .................................. 2-50
Vehicle Dynamic Control (VDC) OFF switch ...........2-51
Clock ............................................. 2-51
Adjusting the time .............................. 2-51
Power outlet ..................................... 2-52
Storage ......................................... 2-54
Cup holders .................................. 2-54
Sunglasses holder ............................. 2-56
Glove box .................................... 2-57
Console box .................................. 2-57
Tray .......................................... 2-58
Coat hooks ................................... 2-59
Luggage hooks ................................ 2-59
Cargo floor box ............................... 2-60
Roof rack ..................................... 2-60
Windows ........................................ 2-61
Power windows ............................... 2-61Moonroof
........................................ 2-63
Automatic moonroof ........................... 2-64
Welcome light ................................... 2-65
Battery saver system .......................... 2-66
Interior lights .................................... 2-66
Map lights .................................... 2-66
Rear personal lights ........................... 2-66
Interior light control switch ....................2-67
Vanity mirror lights ............................... 2-68
Cargo light ...................................... 2-68
HomeLink Universal Transceiver ..................2-68
Programming HomeLink ......................2-69
Programming HomeLink for Canadian
customers .................................... 2-71
Operating the HomeLink Universal
Transceiver ................................... 2-71
Programming

trouble-diagnosis ................. 2-71
Clearing the programmed information ...........2-71
Reprogramming a single HomeLink button.....2-71
If your vehicle is stolen ........................ 2-72

1. Side ventilator
2. Meters and gauges
3. Hazard indicator flasher switch
4. Center ventilator5.Center multi-function control panel
— Vehicle information and setting buttons
6. Center display — Around View Monitor
— Navigation system**
— DVD player operation 7. Clock
8. Defroster switch/Deicer switch*
9. Front passenger supplemental air bag
10. Fuse box
11. Parking brake
12. Hood release handle
13. Steering wheel
— Horn
— Driver supplemental air bag
— Power steering system
14. Push-button ignition switch
15. Climate controlled seat switch*/Heated seat switch*
16. Remote tip-up 2nd row seat switch*
17. Heated steering wheel switch
18. Power outlet
19. Front passenger air bag status light
20. Cup holder
21. Automatic air conditioning system
22. Audio system
23. Glove box*: if so equipped
**: Refer to the separate Navigation System
Owner’s Manual.
SSI0733
INSTRUMENT PANEL
2-4Instruments and controls

If the rear window wiper operation is interrupted
by snow etc., the wiper may stop moving to pro-
tect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow etc. on and
around the wiper arms. After about 1 minute,
turn the switch ON again to operate the wiper.The rear window wiper and washer operate
when the ignition switch is in the ON position.
Turn the switch clockwise from the OFF position
to operate the wiper.
1Intermittent (INT) — intermittent operation
(not adjustable)
2Low (ON) — continuous low speed operation
Push the switch forward
3to operate the
washer. Then the wiper will also operate several
times.
REAR WINDOW AND OUTSIDE MIRROR
DEFROSTER
To defog/defrost the rear window glass and
outside mirrors, start the engine and push the
switch
1on. The indicator light2will come
on. Push the switch again to turn the defroster
off.
It will automatically turn off in approximately 15
minutes.
CAUTION
When cleaning the inner side of the rear win-
dow, be careful not to scratch or damage the
rear window defroster.
SIC4259SIC4385
REAR WINDOW AND OUTSIDE MIRROR
DEFROSTER/WINDSHIELD DEICER (if so
equipped) SWITCH
Instruments and controls2-35

The vehicle should be driven with the Vehicle
Dynamic Control (VDC) system on for most
driving conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to reduce
wheel spin. The engine speed will be reduced
even if the accelerator is depressed to the floor.
If maximum engine power is needed to free a
stuck vehicle, turn the VDC system off.
To turn off the VDC system, push the VDC OFF
switch. The
indicator will illuminate.Push the VDC OFF switch again or restart the
engine to turn on the system. (See “VEHICLE
DYNAMIC CONTROL (VDC) SYSTEM” in the “5.
Starting and driving” section.)
If the power supply is disconnected, the clock
will not indicate the correct time. Readjust the
time.
ADJUSTING THE TIME
1. To set the clock forward, push the button
1.
2. To set the clock backward, push the but- ton
2.
3. To move forward or backward faster, push and hold the button more than 5 seconds.
SIC4455SIC3325
VEHICLE DYNAMIC CONTROL (VDC) OFF
SWITCH CLOCK
Instruments and controls2-51

For details about display clock adjustment (if so
equipped), see “HOW TO USE SETTING BUTTON”
in the “4. Monitor, climate, audio, phone and
voice recognition systems” section.CAUTION
●Use power outlet with the engine running to
avoid discharging the vehicle battery.
● Avoid using power outlet when the air condi-
tioner, headlights or rear window defroster
is on.
● Before inserting or disconnecting a plug, be
sure the electrical accessory being used is
turned OFF.
● When not in use, be sure to close the cap. Do
not allow water to contact the outlet.
Instrument panel
SIC4445
Center console
SIC4453
POWER OUTLET
2-52Instruments and controls

●Push the power door lock switch to the
UNLOCK position.
To lock, close the fuel-filler door securely and
lock all doors by operating the door handle
request switch, the LOCK button on the Intelli-
gent Key, the mechanical key or the power door
lock switch.
FUEL-FILLER CAP
WARNING
● Gasoline is extremely flammable and highly
explosive under certain conditions. You
could be burned or seriously injured if it is
misused or mishandled. Always stop engine
and do not smoke or allow open flames or
sparks near the vehicle when refueling.
● Do not attempt to top off the fuel tank after
the fuel pump nozzle shuts off automati-
cally. Continued refueling may cause fuel
overflow, resulting in fuel spray and possi-
bly a fire. ●
Use only an original equipment type fuel-
filler cap as a replacement. It has a built-in
safety valve needed for proper operation of
the fuel system and emission control sys-
tem. An incorrect cap can result in a serious
malfunction and possible injury. It could
also cause the malfunction indicator light to
come on.
● Never pour fuel into the throttle body to at-
tempt to start your vehicle.
● Do not fill a portable fuel container in the
vehicle or trailer. Static electricity can cause
an explosion of flammable liquid, vapor or
gas in any vehicle or trailer. To reduce the
risk of serious injury or death when filling
portable fuel containers:
– Always place the container on the ground when filling.
– Do not use electronic devices when filling.
– Keep the pump nozzle in contact with the container while you are filling it.
– Use only approved portable fuel contain- ers for flammable liquid.
CAUTION
●If fuel is spilled on the vehicle body, flush it
away with water to avoid paint damage.
● Insert the cap straight into the fuel-filler
tube, then tighten until the fuel-filler cap
clicks. Failure to tighten the fuel-filler cap
properly may cause the
malfunction
indicator light (MIL) to illuminate. If the
light illuminates because the fuel-
filler cap is loose or missing, tighten or in-
stall the cap and continue to drive the ve-
hicle. The
light should turn off after a
few driving trips. If thelight does not
turn off after a few driving trips, have the
vehicle inspected by an INFINITI retailer.
●
The LOOSE FUEL CAP warning (if so equipped)
will appear if the fuel-filler cap is not properly
tightened. It may take a few driving trips for
the message to be displayed. Failure to
tighten the fuel-filler cap properly after the
LOOSE FUEL CAP warning (if so equipped) ap-
pears may cause the
Malfunction Indi-
cator Light (MIL) to illuminate.
The fuel-filler cap is a ratcheting type. Turn the
cap counterclockwise to remove. To tighten,
turn the cap clockwise until ratcheting clicks
are heard.
3-24Pre-driving checks and adjustments

To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise toremove.
2. Put the fuel-filler cap on the cap holder
A
while refueling.
To install the fuel-filler cap:
1. Insert the fuel-filler cap straight into the fuel-filler tube.
2. Turn the fuel-filler cap clockwise until a single click is heard.
LOOSE FUEL CAP warning (if so
equipped)
The LOOSE FUEL CAP warning appears on the
dot matrix liquid crystal display when the fuel-
filler cap is not tightened correctly after the
vehicle has been refueled. It may take a few
driving trips for the warning to be displayed.
To turn off the warning, perform the following:
1. Remove and install the fuel-filler cap as
soon as possible. (See “FUEL-FILLER CAP”
earlier in this section.)
2. Tighten the fuel-filler cap until it clicks. 3. Push the
switchAon the right
side of the combination meter panel for
longer than 1 second to turn off the LOOSE
FUEL CAP warning after tightening the fuel
cap.
SPA2753SPA2815
Pre-driving checks and adjustments3-25