2011 INFINITI EX spare tire

CHANGING WHEELS AND TIRES
Tire rotation
INFINITI recommends rotating the tires
every 7,500 miles (12,000 km). (See
“FLAT TIRE” in the “6. In case of emer-
gency” section for tire replacing proce-
dures.)
As soon as possible, tighten the wheel
nuts to the specified torque with a torque
wrench.Wheel nut tightening torque:
80 ft-lb (108 N·m)
The wheel nuts must be kept tightened to
the specification at all times. It is recom-
mended that wheel nuts be tightened to
the specification at each tire rotation in-
terval.
WARNING
●After rotating the tires, check and ad-
just the tire pressure.
●Retighten the wheel nuts when the ve-
hicle has been driven for 600 miles
(1,000 km) (also in cases of a flat tire,
etc.).
●Do not include the T-type spare tire or
any other small size spare tire in the tire
rotation.
●For additional information regarding
tires, refer to “Important Tire Safety In-
formation” (US) or “Tire Safety Informa-
tion” (Canada) in the Warranty Informa-
tion Booklet.
1. Wear indicator
2. Wear indicator location mark
Tire wear and damage
WARNING
●Tires should be periodically inspected
for wear, cracking, bulging or objects
caught in the tread. If excessive wear,
cracks, bulging or deep cuts are found,
the tire(s) should be replaced.
SDI1662SDI1663
Maintenance and do-it-yourself8-35

●The original tires have built-in tread
wear indicators. When wear indicators
are visible, the tire(s) should be
replaced.
●Tires degrade with age and use. Have
tires, including the spare, over 6 years
old checked by a qualified technician,
because some tire damage may not be
obvious. Replace the tires as necessary
to prevent tire failure and possible per-
sonal injury.
●Improper service of the spare tire may
result in serious personal injury. If it is
necessary to repair the spare tire, con-
tact an INFINITI retailer.
●For additional information regarding
tires, refer to “Important Tire Safety In-
formation” (US) or “Tire Safety Informa-
tion” (Canada) in the Warranty Informa-
tion Booklet.
Replacing wheels and tires
When replacing a tire, use the same size, tread
design, speed rating and load carrying capacity
as originally equipped. (See “SPECIFICATIONS”
in the “9. Technical and consumer information”
section for recommended types and sizes of
tires and wheels.)
WARNING
● The use of tires other than those recom-
mended or the mixed use of tires of different
brands, construction (bias, bias-belted or ra-
dial), or tread patterns can adversely affect
the ride, braking, handling, ground clear-
ance, body-to-tire clearance, tire chain
clearance, speedometer calibration, head-
light aim and bumper height. Some of these
effects may lead to accidents and could re-
sult in serious personal injury. ●
If the wheels are changed for any reason,
always replace with wheels which have the
same off-set dimension. Wheels of a differ-
ent off-set could cause premature tire wear,
degrade vehicle handling characteristics
and/or interference with the brake
discs/drums. Such interference can lead to
decreased braking efficiency and/or early
brake pad/shoe wear. See “WHEELS AND
TIRES” in the “9. Technical and consumer
information” section of this manual for
wheel off-set dimensions.
● When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after 1 minute. Contact your INFINITI
retailer as soon as possible for tire replace-
ment and/or system resetting.
● Replacing tires with those not originally
specified by INFINITI could affect the proper
operation of the TPMS.
● Do not install a damaged or deformed wheel
or tire even if it has been repaired. Such
wheels or tires could have structural damage
and could fail without warning.
● The use of retread tire is not recommended.
8-36Maintenance and do-it-yourself

●For additional information regarding tires,
refer to “Important Tire Safety Information”
(US) or “Tire Safety Information” (Canada) in
the Warranty Information Booklet.
All-Wheel Drive (AWD) models
CAUTION
● Always use tires of the same type, size,
brand, construction (bias, bias-belted or ra-
dial), and tread pattern on all four wheels.
Failure to do so may result in a circumference
difference between tires on the front and
rear axles which will cause excessive tire
wear and may damage the transmission,
transfer case and differential gears.
● ONLY use spare tires specified for the AWD
model.
If excessive tire wear is found, it is recom-
mended that all four tires be replaced with tires
of the same size, brand, construction and tread
pattern. The tire pressure and wheel alignment
should also be checked and corrected as nec-
essary. Contact an INFINITI retailer.
Wheel balance
Unbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can
get out of balance. Therefore, they should be
balanced as required.
Wheel balance service should be performed with
the wheels off the vehicle. Spin balancing the
wheels on the vehicle could lead to mechanical
damage.
For additional information regarding tires, refer
to “Important Tire Safety Information” (US) or
“Tire Safety Information” (Canada) in the
INFINITI Warranty Information Booklet.
Care of wheels
See “CLEANING EXTERIOR” in the “7. Appear-
ance and care” section for details about care of
the wheels.
Spare tire (TEMPORARY USE ONLY
(T-type) spare tire)
Observe the following precautions if the T-type
spare tire must be used, otherwise your vehicle
could be damaged or involved in an accident.
WARNING
● The T-type spare tire should be used for
emergency use. It should be replaced with
the standard tire at the first opportunity to
avoid possible tire or differential damage.
● Drive carefully while the TEMPORARY USE
ONLY spare tire is installed. Avoid sharp
turns and abrupt braking while driving.
● Periodically check spare tire inflation pres-
sure. Always keep the pressure of the TEM-
PORARY USE ONLY spare tire at 60 psi (420
kPa, 4.2 bar). Always keep the pressure of
the full size spare tire (if so equipped) at the
recommended pressure for standard tires,
as indicated on the Tire and Loading Infor-
mation label. For Tire and Loading Informa-
tion label location, see “Tire and Loading
Information label” in the index of this
manual.
● With the TEMPORARY USE ONLY spare tire
installed do not drive your vehicle at speeds
faster than 50 MPH (80 km/h).
● When driving on roads covered with snow or
ice, the TEMPORARY USE ONLY spare tire
should be used on the front wheels and origi-
nal tire used on the rear wheels (drive
wheels). Use tire chains only on the two rear
original tires.
Maintenance and do-it-yourself8-37

●Tire tread of the TEMPORARY USE ONLY
spare tire will wear at a faster rate than the
standard tire. Replace the spare tire as soon
as the tread wear indicators appear.
● Do not use the spare tire on other vehicles.
● Do not use more than one spare tire at the
same time.
CAUTION
● Do not use tire chains on a TEMPORARY USE
ONLY spare tire. Tire chains will not fit prop-
erly and may cause damage to the vehicle.
● Because the TEMPORARY USE ONLY spare
tire is smaller than the original tire, ground
clearance is reduced. To avoid damage to the
vehicle, do not drive over obstacles. Also do
not drive the vehicle through an automatic
car wash since it may get caught.
8-38Maintenance and do-it-yourself

WHEELS AND TIRES
Road wheel
TypeSize Offset in (mm)
Conventional 18 × 8J 1.85 (47)
19×8J
Spare 17 × 4T 1.18 (30)
Tire
TypeSize Pressure PSI (kPa) [Cold]
Conventional P225/55R18
33 (230)
P245/45R19
Spare (T-type) T165/80R17
60 (420)
T165/80D17
9-8Technical and consumer information

Use the following steps to mount the license
plate.
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
Only use the recommended mounting position
or Intelligent Cruise Control (ICC) sensor ob-
struction (if so equipped) may result.
●License plate bracket
● J-nut × 2
● Screw × 2
● Screw grommet × 2
1. Park the vehicle on flat, level ground.
2. Place the license plate bracket with the
positioner
Afit to the bumper pillarB
and the side end surface of the bracket
aligned with the bumper
C.
3. Mark the center of the hole
Dwith a
felt-tip pen.
4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked loca-
tions. (Be sure that the drill only goes
through the bumper fascia.)
5. Insert grommets into the hole on the fascia.
6. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the
part
E. 7. Insert a J-nut into the license plate bracket
before placing the license plate bracket
on the fascia.
8. Install the license plate bracket with screws.
9. Install the license plate with bolts that are no longer than 0.55 in (14 mm).
WARNING
●It is extremely dangerous to ride in a
cargo area inside the vehicle. In a colli-
sion, people riding in these areas are
more likely to be seriously injured or
killed.
●Do not allow people to ride in any area
of vehicle that is not equipped with
seats and seat belts.
●Be sure everyone in your vehicle is in a
seat and using a seat belt properly.
TERMS
It is important to familiarize yourself
with the following terms before loading
your vehicle:
●Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional equipment, flu-
ids, emergency tools, and spare tire
assembly. This weight does not
include
passengers and cargo.
VEHICLE LOADING INFORMATION
Technical and consumer information9-13

Cargo light................... .2-56
Catalytic converter, Three way catalyst .....5-2
CD/CF/USB memory care and cleaning . . . .4-88
Center multi-function control panel .......4-2
Child restraints ................. .1-20
Booster seats ................ .1-34
LATCH system ................ .1-22
Precautions on child restraints .......1-21
Child safety ................... .1-19
Child safety rear door lock ............3-6
Chimes Audible reminders ............. .2-20
Seat belt warning light and chime .....2-16
Circuit breaker, Fusible link ..........8-20
Cleaning exterior and interior ........7-2, 7-4
Climate control, Automatic climate control . .4-39
Clock ...................... .2-44
Coat hooks ................... .2-48
Cockpit ...................... .2-2
Cold weather driving .............. .5-83
Compact Disc (CD) player (See audio
system) ..................... .4-65
Compact spare tire ............... .8-37
Compass ..................... .2-8
Console box .................. .2-47
Controller, Center multi-function control
panel ....................... .4-5
Controls Control panel button .............4-2
INFINITI Controller .............. .4-5
Coolant Capacities and recommended fuel/
lubricants .................. .9-2
Changing engine coolant ...........8-8
Checking engine coolant level ........8-7
Corrosion protection .............. .7-6Cover, Cargo cover
............... .2-48
Cruise control .................. .5-32
Fixed speed cruise control (on ICC
system) ................... .5-50
Cup holders ................... .2-45
Current fuel consumption ............2-27
D
Daytime

running light system ..........2-37
Defroster switch, Rear window and
outside mirror defroster switch .........2-34
Dimensions ................... .9-9
Distance Control Assist (DCA) system .....5-54
Distance Control Assist (DCA) system
warning light .................. .2-14
Distance to empty ............... .2-28
Door/lift gate open warning ..........2-24
Dot matrix liquid crystal display ........2-20
Drive belts ................... .8-15
Drive positioner ................ .3-24
Driving All-wheel drive (AWD) ............5-74
All-wheel drive (AWD) safety precautions . .5-7
Cold weather driving .............5-83
Driving with automatic transmission . . . .5-12
On-pavement and off-road driving ......5-5
Precautions when starting and driving . . .5-2
DS (Drive Sport) mode ..............5-14
DVD player operation ............. .4-66
E
Economy, Fuel ................. .5-73
Elapsed time .................. .2-27Elapsed time and trip odometer . . .
.....2-27
Emission control information label .......9-11
Emission control system warranty . ......9-18
Engine Before starting the engine ..........5-11
Break-in schedule ............. .5-73
Capacities and recommended fuel/
lubricants .................. .9-2
Changing engine coolant ...........8-8
Changing engine oil and filter ........8-8
Checking engine coolant level ........8-7
Checking engine oil level ...........8-8
Coolant temperature gauge .........2-7
Emergency engine shut off .........5-10
Engine block heater .............5-85
Engine compartment check locations . . . .8-6
Engine

cooling system............8-6
Engine oil .................. .8-8
Engine oil and oil filter recommendation . .9-5
Engine oil replacement indicator ......2-26
Engine oil viscosity ............. .9-5
Engine serial number ............9-10
Engine specifications .............9-7
Engine start operation indicator . . . . . .2-23
If your vehicle overheats ..........6-10
Starting the engine ............. .5-11
Entry/exit function, Automatic drive
positioner .................... .3-24
Event Data Recorders (EDR) ...........9-21
Exhaust gas (carbon monoxide) .........5-2
F
F.M.V.S.S./C.M.V.S.S. certification label . . . .9-11
10-2

Infants.................... .1-19
Injured persons ............... .1-15
Larger children ............... .1-20
Precautions on seat belt usage .......1-12
Pregnant women .............. .1-15
Rear center seat belt .............1-18
Seat belt cleaning .............. .7-5
Seat belt extenders ............. .1-18
Seat belt maintenance ............1-18
Seat belt warning light and chime .....2-16
Seat belts .................. .1-12
Seat belts with pretensioners ........1-48
Shoulder belt height adjustment ......1-17
Small children ................ .1-19
Three-point type............... .1-15
Seat synchronization function .........3-25
Seat(s) Driver-side memory .............3-24
Heated seats ................ .2-40
Seats ..................... .1-2
Seat-mounted jacket hanger ..........2-47
Security system, Vehicle security system . . .2-29
Security system (INFINITI Vehicle Immobilizer
System), Engine start ..............2-31
Selector lever Shift lock release .............. .5-15
Servicing climate control ............4-47
SETTING button ................. .4-12
SHIFT “P” warning ............... .2-23
Shift lock release Transmission ................ .5-15
Shifting, Automatic transmission ........5-12
Shoulder belt height adjustment, For front
seats ....................... .1-17
Snow mode switch ............... .2-43
Spare tire .................... .9-8Spark plugs
................... .8-16
Speedometer ................... .2-6
Starting Before starting the engine ..........5-11
Jump

starting ................ .6-8
Precautions when starting and driving . . .5-2
Push starting ................ .6-10
Starting the engine ............. .5-11
STATUS button .................. .4-8
Status light, Front passenger air bag .....1-44
Steering Power steering fluid .............8-11
Power steering system ............5-77
Steering lock ................. .5-9
Steering lock release malfunction
indicator .................. .2-23
Steering-wheel-mounted controls for
audio .................... .4-90
Tilting telescopic steering column .....3-19
Storage ..................... .2-45
Sun visors ................... .3-20
Sunglasses holder ............... .2-46
Supplemental air bag warning labels .....1-49
Supplemental air bag warning light . . .1-49, 2-16
Supplemental restraint system .........1-37
Precautions on supplemental restraint
system .................... .1-37
Switch Autolight switch .............. .2-35
Fog light switch .............. .2-39
Hazard warning flasher switch .......2-39
Headlight switch .............. .2-35
Ignition switch ............... .5-12
Intelligent Brake Assist (IBA) OFF switch .2-43
Power door lock switch ............3-5 Rear window and outside mirror defroster
switch
.................... .2-34
Snow mode switch ............. .2-43
Turn signal switch ............. .2-39
Vehicle dynamic control (VDC) off switch .2-43
Warning systems switch ..........2-42
T
Tachometer .................... .2-7
Temperature gauge, Engine coolant
temperature gauge ............... .2-7
Theft (INFINITI Vehicle Immobilizer System),
Engine start ................... .2-31
Three-way catalyst ................ .5-2
Tire Pressure, Low tire pressure warning
light ..................... .2-15
Tire
replacement indicator .........2-26
Tires Flat tire .................... .6-2
Low tire pressure warning system ......5-3
Spare tire .................. .8-37
Tire and Loading information label .8-29, 9-11
Tire chains ................. .8-34
Tire dressing ................. .7-4
Tire pressure ................ .8-28
Tire pressure monitoring system
(TPMS) .................. .5-3, 6-2
Tire rotation ................ .8-35
Types of tires ................ .8-33
Uniform tire quality grading . . . . .....9-17
Wheel/tire size ............... .9-8
Wheels and tires .............. .8-28
Tonneau cover (see cargo cover) . . ......2-48
10-6