Page 171 of 722

To open or close the door with the
outside door handle, pull the door
handle. If you pull the door handle
while a door is opening or closing,
the door stops moving. If you pull the
door handle again, the door will
If you release the brake pedal or the
parking brake when you try to open
the sliding door, you will hear a beep
and the door will be left ajar.
To open the door f ully, shif t to Park,
press the brake, or apply the parking
brake.
If you release the brake pedal or the
parking brake when you try to close
the sliding door, you will hear a beep
until the door closes.
When you shif t out of Park while a
door is opening, you will hear a
continuous tone and the door will
stop moving if you release the brake
pedal or the parking brake. Stop the
vehicle and close the door. If you shif t out of Park while a door
is closing and you have neither
pressed the brake pedal nor applied
the parking brake, you will hear a
beep until the door closes.
To open the door with the inside
door handle, tilt the handle
backward. Tilt it f orward to close the
door. If you tilt the handle in either
direction while the door is opening
or closing, the door stops moving.
Thentiltthehandleinthe
appropriate direction to open or
When the shif t lever is in Park:
When the shif t lever is in any position
except Park and the ignition switch is inthe ON (II) position:Sliding Doors
Door Handles
168
10/07/17 09:56:36 31TK8600_173
c l o s e the door f ully.
open f ully.
2011 Odyssey
Page 174 of 722

µµ
CONT INUED
You can customize the power sliding
doors button on the remote
transmitter to not open the sliding
doors without unlocking the sliding
doors lock f irst.
When you customize the setting,
make sure your vehicle is parked
saf ely, the parking brake is applied,
all doors are f ully closed and locked,
the key is removed f rom the ignition switch, and the power sliding door
MAIN switch is set to the OFF
position.
There are two settings you can
choose f rom:
ANYTIME The sliding door
unlocks and opens when you press
andholdtheslidingdoorbuttonon
theremotetransmitterfor1second.
Thefrontdooronthesamesidealso
unlocks at the same time.
WHEN UNLOCKED In this mode,
you must unlock the sliding door
bef ore opening it.
You can switch between these two
modes as f ollowing:
Press and hold the driver’s side
sliding door dashboard CLOSE
switch. Keep pressing the dashboard
switch, press and hold the driver’s
side power sliding door button on
the remote transmitter until the
LED on the remote f lashes (f or 1
second).
Release the dashboard switch.
Follow steps 1 through 3 within 20
seconds and repeat it f our times.
To go back to the other setting,
repeat the above procedure.
When the ‘‘WHEN UNLOCKED’’
mode is set, you will hear 3 short
beeps.
When the ‘‘ANYTIME’’ mode is
set, you will hear a long beep.
1. 2.
3.
4.
Sliding Doors
T o Customize the Power Sliding
Doors Set t ing
Instruments and Controls
171
MAIN SWITCH DRIVER’S SIDE DASHBOARD SWITCH
DRIVER’S SIDE
POWER SLIDING
DOOR BUTTON LED
10/07/17 09:57:05 31TK8600_176
2011 Odyssey
Page 178 of 722

µ
Raises or lowers the
seat. (Driver’s seat
only)
Moves the whole
seat up and forward,
or down and
backward. The f ront
of the seat also tilts
up or down at the
same time. (Driver’s
seat only)
Adjusts the seat-
back angle f orward
or backward.
Moves the seat
forward and
backward.
Moves the f ront of
the seat up or down.
(Driver’s seat only)
Increases or
decreases the
lumbar support.
(Driver’s seat only)
The Driver’s power seat has no
lumbar support.
The f ront passenger’s seat adjusts
manually. The controls f or the power
adjustable front seats are on the
outside edge of each seat bottom.
You can adjust the seats with the
ignition switch in any position. Make
all seat adjustments bef ore you start
driving.
The passenger seat has the same
adjustments as the driver’s seat but
without any height and lumbar
adjustments.
See pages f or important saf ety
inf ormation and warnings about how toproperly position the seats and seat-backs.
On all models except LX
On LX models
On LX and EX models
12 13
CONT INUED
Power Seat A djustments
Seats
Instruments and Controls
175
10/07/17 09:57:47 31TK8600_180
2011 Odyssey
Page 192 of 722

Follow these precautions when using
the seat heaters:If the engine is lef t idling f or an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting. Donotusetheseatheaterinthe
HI setting f or an extended period,
because it draws large amounts of
current f rom battery.
Both f ront seats are equipped with
seat heaters. Because of the sensors
f or the side airbag cutof f system,
there is no heater in the passenger’s
seat-back. The ignition switch must
be in the ON (II) position to use the
heaters. To use the heaters, press the seat
heater switch. The indicator (amber)
in the switch will come on. There are
three settings in the heaters: HI, LO,
and OFF.
When you press the seat heater
switch once, the heater is set to HI.
Select LO by pressing the seat
heater switch again. To shut down
the heater, press the seats heater
switch until the indicators go of f . The heater runs continuously and
does not automatically turn of f
af ter a period of time.
On all models except LX
Seat Heaters
Instruments and Controls
189
Passenger’s
seat
Driver’s
seat
HEATERS SEAT HEATER SWITCHES
10/07/17 09:59:37 31TK8600_194
2011 Odyssey
Page 193 of 722

Store a driver’s seat position only
when the vehicle is parked.Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
Adjust the seat to a comfortable
position (see page ).
Adjust the outside mirrors f or best
visibility (see page ).
Your vehicle has a memory feature
f or the driver’s seat and outside
mirror positions.
Two seat and outside mirror
positionscanbestoredinseparate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
You can change the ‘‘MEMORY
POSITION LINK’’ setting on the
multi-inf ormation display (see page
). Press and release the SET button
on the driver’s door. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver’s seat and
outside mirrors are now stored.
1.
2.
3.
4.
110 175
198
On Touring models
Storing a Driving Position in
Memory
Driving Position Memory System190
MEMORY BUTTONS
SET BUTTON
10/07/17 09:59:45 31TK8600_195
2011 Odyssey
Page 195 of 722

µ
Turn the ignition switch to the ON
(II) position to raise or lower any
window. To open a window, push the
switchdownandholdit.Releasethe
switch when you want the window to
stop. Pull back on the switch and
hold it to close the window. To open either f ront
window f ully, push the window
switch f irmly down to the second
detent, then release it. The window
automatically goes down all the way.
To stop the window f rom going all
the way down, pull back on the
window switch briefly.
To close either f ront window f ully,
pull back the window switch f irmly
to the second detent, then release it.
The window automatically goes all
the way up. To stop the window f rom
going all the way up, push down on
the window switch briefly.
Power Windows
AUTO
192
MAIN SWITCH
PASSENGER’S
WINDOW SWITCH
DRIVER’S
WINDOW SWITCH
INDICATOR
Closing a power window on
someone’s hands or fingers can
cause serious injury.
Make sure your passengers are
away from the windows before
closing them.
10/07/17 10:00:03 31TK8600_197
2011 Odyssey
Page 196 of 722

µ
When you push the main switch in,
the indicator comes on and the
passengers’ windows cannot be
raised or lowered. Use the main
switchwhenyouhavechildreninthe
vehicle so they do not injure
themselves by operating the
windows unintentionally. To cancel
this feature, push on the switch
again. The switch will pop out and
the indicator will go of f .
The windows and the main switch
feature will operate for up to 10
minutes after you turn off the
ignition switch. Opening either f ront
door cancels this f unction. If either f ront
window senses any obstacle while it
is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
bef ore closing it.
The driver’s window auto
reverse f unction is disabled when
you continuously pull up the switch. You can open all of the windows and
the moonroof (if equipped) f rom the
outside with the remote transmitter.
Press the UNLOCK button once
to unlock the driver’s door.
Press the UNLOCK button a
second time, and hold it. The
passenger’s doors and the tailgate
unlock, and all f our windows and
moonroof start to open. To stop
the windows and moonroof ,
release the button.
1.
2.
On all models except LX
Power Windows
AUTO REVERSE
Opening the Windows and
Moonroof with the Remote
Transmitter
Instruments and Controls
193
NOTE:
10/07/17 10:00:11 31TK8600_198
2011 Odyssey
Page 198 of 722

To open the moonroof f ully, pull
back the moonroof switch f irmly.
The moonroof opens all the way. To
stop the moonroof f rom opening
f ully, push the switch brief ly. Turn the ignition switch to the ON
(II) position bef ore operating the
moonroof switch on the ceiling
console.
Turnthekeyclockwiseagain,and
hold it. All f our windows and the
moonroof start to open. To stop
the windows and the moonroof ,
release the key.
To close:
Insert the key in the driver’s door
lock.
Turn the key counterclockwise,
then release it.
To open the windows and the
moonroof f urther, turn and hold
the key again (within 10 seconds
of step 2). Turn the key counterclockwise
again, and hold it. All four
windows and the moonroof start to
close. To stop the windows and
the moonroof , release the key.
To close the windows and the
moonroof f urther, turn and hold
the key again (within 10 seconds
of step 2).
If the windows and the
moonroof stop bef ore the desired
position, repeat steps 2 and 3. 1.
2.
3.
4.
3.
4.
CONT INUED
On EX-L and Touring modelsMoonroofPower Windows, Moonroof
Instruments and Controls
195
NOTE:
Open
Close Tilt
MOONROOF SWITCH
10/07/17 10:00:28 31TK8600_200
2011 Odyssey