2011 HONDA ODYSSEY eco mode

[x] Cancel search: eco mode

Page 153 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual µ
µ µ
To change the ‘‘SECURITY
RELOCK TIMER’’ setting, see page .Press this button once
to unlock the driver’s door. Press it
twice to unlock the other doors and
the tailgate. Some ext

Page 154 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual If the power sliding door MAIN
switch on the dashboard is in the
OFF position, you cannot open or
close the sliding doors with the
remote transmitter.
Press and hold the right button for
about 1 secon

Page 159 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual All doors and the tailgate can be
locked f rom the outside by using the
key in the driver’s door lock. To
unlock only the driver’s door, insert
the key, turn the key, and release it.
The remaining

Page 160 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual The auto door locking f eature has
three possible settings:The auto door locking is
deactivated all the time.
The doors and tailgate lock
whenever you move the shif t lever
out of the Park (P) positio

Page 161 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when theshif t lever is moved out of the Park (P)position. Locks all doors and tailgate when the
vehicle’s speed reaches about 10 mph(15 km/h).
Make sure the shif t leve

Page 162 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual CONT INUED
Push and hold the brake pedal,
and move the shif t lever out of the
Park (P) position.
Pushandholdthefrontof the
master door lock switch on the
driver’s door. You will hear a click.
Keep

Page 163 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Pushandholdtherearof the
master door lock switch on the
driver’s door. You will hear a click,
and after about 5 seconds, you will
hear another click.
Release the switch, and within 20
seconds, turn

Page 164 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Unlocks the driver’s door or all doorsand tailgate when the ignition switch ismoved out of the ON (II) position.
Make sure the shif t lever is in the
Park (P) position.
Turn the ignition switch to t