2011 HONDA ODYSSEY radio

To load or play a disc, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
You operate the disc player with the
same controls used f or the radio. To
select the disc player, press the CD
button. You will see ‘‘CD’’ in the
display.If a f ile on an MP3 or WMA disc is
protected by digital rights
management (DRM), the audio unit
displays UNSUPPORTED, and then
skips to the next f ile.
Video CDs and DVDs do not work in
this unit.
The CD player can play CD-Rs and
CD-RWs compressed in MP3, WMA
or AAC f ormats. When playing a disc
in MP3, WMA or AAC, you will see
‘‘MP3,’’ ‘‘WMA’’ or ‘‘AAC’’ on the
display. A disc can support more
than 99 folders, and each folder can
hold up to 255 playable f iles.
If you have a disc that is a
combination of CD-DA tracks and
MP3/WMA f iles, you can choose the
f ormat to listen by pressing and
holding CD button until you hear a
beep.
To Play a DiscPlaying a Disc (L X model)244
NOTE:
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
10/07/17 10:07:08 31TK8600_249
2011 Odyssey

Each time you press the TITLE
button, the display shows you the
text, if the disc was recorded with
text data.
When you press and release the
TITLE button while a disc without
text data is playing, you will see ‘‘NO
INFO’’ on the display.
Depending on the sof tware the f iles
were made with, it may not be
possible to play some f iles, or display
some text data.
Insert a disc about half way into the
disc slot. The drive will pull the disc
intherestof thewaytoplayit.You
operate the disc player with the
same controls used f or the radio.
The number of the current track is
showninthedisplay.Whenplayinga
disc in MP3, WMA or AAC, the
numbers of the current f older and
f ile are shown. The system will
continuously play a disc until you
change modes.
You cannot load and play 3-inch
(8-cm)discsinthissystem.
For inf ormation on how to handle
and protect compact discs, see
. You can see the album, artist, and
track name in the display. If a disc is
recorded in MP3, WMA or AAC you
can see the f older and f ile name, and
the artist, album, and track tag.
CONT INUED
T ext Data Display Function
To Load a DiscPlaying a Disc (L X model)
Features
245
10/07/17 10:07:15 31TK8600_250
page 352
2011 Odyssey

If you turn the system of f while a
disc is playing, either with the
power/volume knob or by turning
of f the ignition switch, the disc will
stay in the drive. When you turn the
system back on, the disc will begin
playing where it lef t of f .
For inf ormation on how to handle
and protect compact discs, see.
Press the eject button ( ) to
remove the disc. If you eject the disc,
but do not remove it f rom the slot,
the system will automatically reload
the disc af ter 10 seconds and begin
playing.
You can also eject the disc when the
ignition switch is of f .
To play the radio when a disc is
playing, press the AM or FM button.
Press the CD button again to switch
back to the disc player.
Protecting Discs
To Stop Playing a Disc
Playing a Disc (L X model)
Features
249
10/07/17 10:07:45 31TK8600_254
page
352
2011 Odyssey

Most audio system f unctions can be
controlled by standard buttons, bars,
and knobs. In addition, you can
access some f unctions by using the
selector knob on the audio system.To select any setting such as the
clock or sound adjusting, press the
SETUP button. To use any audio
system f unction, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position. You can select the
item by turning the selector knob.
To go back to the previous display,
press the RETURN button.
Pressing the SETUP button again
will also cancel the setup display
mode.
The knob turns lef t and right. Use it
to scroll through lists, or to make
selections or adjustments to a list or
menu item on the display. When you
make a selection, push the center of
the selector to go to that selection.
When the audio system is in XM
Radio mode or playing discs, pushing
the selector knob switches the
display between the normal display
andtheextendeddisplay.
Selector K nob
SET UP Display
Audio System (EX, EX-L models without navigation system)
Features
251
SELECTOR KNOB
RETURN BUTTON SETUP BUTTON
10/07/17 10:08:00 31TK8600_256
2011 Odyssey

Playing the FM/AM Radio (EX, EX-L models without navigation system)Wit hout rear ent ert ainment syst emWit h rear ent ert ainment syst em252SCAN
BUTTON
SKIP BAR
RETURN
BUTTON AM/FM BUTTON
SELECTOR KNOB
U.S. EX models
PRESET BUTTONS
TITLE
BUTTON Canadian EX and EX-L models
U.S. EX-L models
CATEGORY
BAR
SETUP
BUTTON POWER/
VOLUME
KNOB
TITLE
BUTTON
SKIP BAR
SCAN
BUTTON
RETURN
BUTTON
SELECTOR KNOB
SETUP
BUTTON
PRESET BUTTONS
AM/FM BUTTON
CATEGORY
BAR
(FOLDER
BAR) POWER/
VOLUME
KNOB
10/07/17 10:08:07 31TK8600_257
2011 Odyssey

µ
µ
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
On the AM band, AM noise
reduction turns on automatically. The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button, or AM/FM button. On
the FM band, ST will be displayed if
the station is broadcasting in stereo.
Stereo reproduction in AM is not
available. On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see
. The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
and hold the or side of the
SKIP bar until you hear a beep, then
release it.
Use the selector knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob. Adjust the
volume by turning the same knob.
CONT INUED
To Select a Station
To Play the Radio SK IP
TUNE
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
253
10/07/17 10:08:15 31TK8600_258
page 255
2011 Odyssey

µ
µ µ
Each preset button can
store one f requency on AM and two
f requencies on FM.
Select the desired band, AM or
FM. You can store one f requency
on FM1, and one f requency on
FM2witheachpresetbutton.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the SETUP button to display
the setup MENU. Turn the selector
knob to select Auto Select, then
press the selector knob. The display
changes to the auto select mode.
Select ‘‘PUSH TO START’’ or ‘‘ON,’’
then press the selector knob. You
will see Auto Select on the display,
and the system goes into the auto
select mode f or several seconds.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
1.
2.
3.
4. Preset
SCAN AUTO SELECT
Playing the FM/AM Radio (EX, EX-L models without navigation system)254
10/07/17 10:08:23 31TK8600_259
2011 Odyssey

On the FM band, you can select a
favorite station and display the
program service name provided by
the radio data system (RDS).
You will see ‘‘0’’ displayed if auto
select cannot f ind a strong station f or
every preset button.
select Auto
Select on the setup menu again and
turn the selector knob to select
‘‘PUSH TO CANCEL’’ or ‘‘OFF,’’
then press the selector knob. This
restores the presets you originally
set.
For inf ormation on FM/AM radio
f requencies and reception, see . The RDS inf ormation display
f unction shows the name of the RDS
station you are listening to. With the
audio system on and the FM band
selected, you can turn this f unction
on or of f .
To switch the function between on
and off, press and release the TITLE
button. With the system on, you will
see the ‘‘RDS INFO ON’’ message
briefly on the display. If the station
you are listening to is an RDS station,
the display shows the station name.
To cancel auto select,
On EX models
CONT INUED
Radio Data System (RDS)RDS INFO Display
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
255
U.S. EX models
EX-L and Canadian EX models
10/07/17 10:08:32 31TK8600_260
page409
2011 Odyssey