2011 HONDA CR-Z wiper blades

Safe Driving P. 29
For Safe Driving P. 30 Seat Belts P. 34 Airbags P. 41
Instrument Panel P. 67
Indicators P. 68 Gauges and Multi-Information Display P. 81
Controls P. 97
Setting the Clock P. 98 Locking and Unlocking the Doors P. 99
Operating the Switches Around the Steering Wheel P. 109
Interior Lights/Interior Convenience Items P. 123
Features P. 135
Audio System P. 136 Audio without Navigation System P. 141
General Information on the Audio System P. 170
Driving P. 191
Before Driving P. 192 Towing a Trailer P. 196
Refueling P. 231 Fuel Economy P. 234
Maintenance P. 237
Before Performing Maintenance P. 238 Maintenance Minder ™
P. 241
Checking and Maintaining Wiper Blades P. 266
Climate Control System Maintenance P. 280
Handling the Unexpected P. 285
Tools P. 286 If a Tire Goes Flat P. 287
Overheating P. 297 Indicator, Coming On/Blinking P. 299
Information P. 311
Specifications P. 312 Identification Numbers P. 314
Emissions Testing P. 317 Authorized Manuals P. 319
This owner’s manual should be considered a permanent part of
the vehicle and should remain with the vehicle when it is sold.
This owner’s manual covers all models of the CR-Z. You may
find descriptions of equipment and features that are not on your
particular model.
Images throughout this owner’s manual (including the front
cover) represent features and equipment that are available on
some, but not all, models. Your particular model may not have
some of these features.
The information and specifications included in this publication
were in effect at the time of approval for printing. Honda Motor
Co., Ltd. reserves the right, however, to discontinue or change
specifications or design at any time without notice and without
incurring any obligation.
Main Menu2011 CR-Z Online Reference Owner's Manual

Quick Reference Guide
22
Maintenance P. 2 3 7
Under the Hood P. 2 4 5
Check engine oil, engine coolant, and window washer fluid.

●
Add when necessary. Check transmission fluid (CVT).

●
Check brake fluid and clutch fluid.

●
Check the 12 volt battery regularly.

●
Pull the hood release handle under the corner of the
dashboard.
Locate the hood latch handle, pull the handle up, and lift up the hood.
When finished, close the hood and make sure it is
firmly locked in place.
Wiper Blades P. 2 6 6
Replace blades if they leave streaks

●
across the windshield.
Lights
P. 2 5 8
Inspect all lights regularly.

●
Tires
P. 2 6 9
Inspect tires and wheels regularly.

●
Check tire pressure regularly.

●
Install snow tires for winter driving.

●
Main Menu

113
Controls
Operating the Switches Around the Steering Wheel Wipers and Washers
Wipers and Washers
Wipers and Washers
If the vehicle speeds up while the wipers are operating intermittently, the interval decreases by about four seconds. Also, when the vehicle starts moving, the wipers make a single sweep. In the shortest delay setting (
), the wipers
change to low speed operation when the vehicle speed exceeds 12 mph (20 km/h).
NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged. Turn the washers off if no washer luid comes out. The pump may get damaged.
NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck.Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.
Front Wiper/Washer
■
The windshield wipers and washers can be used when the ignition switch is in ON
II.
MIST
■
The wipers run at high speed until you release the lever.
Wiper Switch (OFF, INT, LO, HI)
■
Change the wiper switch setting according to the amount of rain.
Adjusting the Delay
■
Turn the adjustment ring to adjust the wiper delay.
Washer
■
Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.
Pull to use
washer.
Intermittent Time Adjustment Ring
MIST OFF
INT: IntermittentLO: Low speed wipeHI: High speed wipeLong delay Short delay
Main MenuTable of Contents

Maintenance
This chapter discusses basic maintenance.
237
Before Performing Maintenance
Inspection and Maintenance ................... 238
Safety When Performing Maintenance ... 239Parts and Fluids Used in Maintenance
Service .................................................. 240
Maintenance Minder ™
............................ 241
Maintenance Under the Hood Maintenance Items Under the Hood ....... 245
Opening the Hood ................................. 246
Recommended Engine Oil ...................... 247
Oil Check ............................................... 248
Adding Engine Oil .................................. 249
Changing the Engine Oil and Oil Filter .... 250 Engine Coolant ...................................... 252
Transmission Fluid .................................. 254
Brake/Clutch Fluid .................................. 256
Refilling Window Washer Fluid ............... 257
Replacing Light Bulbs ............................. 258
Checking and Maintaining Wiper Blades Checking Wiper Blades ........................... 266
Changing the Front Wiper Blade Rubber 266
Changing the Rear Wiper Blade Rubber .. 268
Checking and Maintaining Tires Checking Tires ........................................ 269
Tire and Loading Information Label ........ 270
Tire Labeling ........................................... 270 DOT Tire Quality Grading (U.S. Vehicles)
.272
Wear Indicators ...................................... 274
Tire Service Life ...................................... 274
Tire and Wheel Replacement .................. 275
Tire Rotation .......................................... 276
Winter Tires ............................................ 277
12 Volt Battery ........................................ 278
Remote Transmitter Care ....................... 279
Replacing the Battery ............................. 279
Climate Control System Maintenance ... 280
Cleaning ................................................... 281
Interior Care ........................................... 281
Exterior Care .......................................... 283
Main Menu

238
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle
in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.Types of Inspection and Maintenance

■
Daily Inspections
■
Perform inspections before long distance trips, when washing the vehicle, or when refueling.
Periodic Inspections
■
Check the automatic transmission fluid level monthly.
•
Automatic Transmission Fluid P.254
Check the brake fluid level monthly.
•
Brake/Clutch Fluid P.256
Check the tire pressure monthly. Examine the tread for wear and foreign objects.
•
Checking and Maintaining Tires P.269
Check the operation of the headlights, parking lights, taillights, high-mount
•
brake light, and license plate lights monthly.
Replacing Light Bulbs P.258
Check the condition of the wiper blades at least every six months.
•
Checking and Maintaining Wiper Blades P.266
Inspection and Maintenance
U.S. models only Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are "certiied" to EPA standards. According to state and federal regulations, failure to perform maintenance on the items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the multi-information display.
Maintenance Service Items P. 2 4 3
If you want to perform complex maintenance tasks that require more skills and tools, purchase the service manual.
Authorized Manuals P. 3 1 9
If you want to perform maintenance yourself, make sure that you have the necessary tools and skills irst.After performing maintenance, complete the records in the separate maintenance booklet.
Main MenuTable of Contents

266
Maintenance
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leaves streaks and the metal wiper arm may scratch the window glass. Changing the Front Wiper Blade Rubber1. Lift the driver side wiper arm first, then the passenger side.
2. Push the lock tab up.Slide the blade from the wiper arm.
3.
Changing the Front Wiper Blade Rubber
NOTICE When replacing a wiper blade, make sure not to drop the wiper blade or wiper arm down on the windshield.
Lock Tab
Main MenuTable of Contents

267
Maintenance
Checking and Maintaining Wiper Blades Changing the Front Wiper Blade Rubber
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
5. Remove the retainer from the rubber blade that has been removed, and mount it to a new rubber blade.
Correctly align the rubber protrusion
and the retainer groove.
6. Slide the new wiper blade onto the holder from the bottom end.
The tab on the blade should fit in the
indent of the wiper blade.
Slide the wiper blade onto the wiper arm,
7.
then push down the lock tab. Lower the passenger side wiper arm first,
8.
then the driver side.
Blade
Main MenuTable of Contents

268
Maintenance
Checking and Maintaining Wiper Blades Changing the Rear Wiper Blade Rubber
Changing the Rear Wiper Blade Rubber1. Raise the wiper arm off. Slide the wiper blade out from the wiper
2.
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder by pulling the tabbed end out.
4. Remove the retainer from wiper blade and mount it to a new rubber blade.Slide the wiper blade onto the holder.
5.
Make sure it is engaged correctly, then
install the wiper blade assembly onto the wiper arm.
Changing the Rear Wiper Blade Rubber
NOTICE When replacing the wiper blade, make sure not to drop the wiper blade or wiper arm down on the rear window.
Tabbed End
Main MenuTable of Contents