2011 HONDA CR-Z coolant level

243
Maintenance
Maintenance Minder™
Maintenance Service Items
■
System Message Indicator Maintenance Minder Message
Sub Items
Main Item
Maintenance Service Items
Independent of the maintenance minder
•
messages, replace the brake luid every 3 years. Inspect idle speed every 160,000 miles (256,000
•
km).Adjust the valves during services A, B, 1, 2, or 3
•
only if they are noisy.
*1: Change the engine oil according to the maintenance minder messages, or annually, whichever comes irst.
*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen ilter every 15,000 miles (24,000 km).
#: See information on maintenance and emissions warranty.
Code Maintenance Main Items
A Replace engine oil*
• 1
B Replace engine oil*
• 1
and oil filter
Inspect front and rear brakes
•
Check parking brake adjustment
•
Inspect tie rod ends, steering gear
•
box, and boots
Inspect suspension components
•
Inspect driveshaft boots
•
Inspect brake hoses and lines
•
(including ABS/VSA ®
)
Inspect all fluid levels and
•
condition of fluids
Inspect exhaust system
• #
Inspect fuel lines and connections
• #Code Maintenance Sub Items
1 Rotate tires •
2 Replace air cleaner element* • 2
Replace dust and pollen
•
filter* 3
Inspect drive belt
•
3 Replace transmission fluid •
4 Replace spark plugs •
Inspect valve clearance
•
5 Replace engine coolant •
Main MenuTable of Contents

252
Maintenance
Maintenance Under the Hood Engine Coolant
Engine Coolant
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
This coolant is premixed with 50% antifreeze and 50 % water. Do not add any more
antifreeze or water. We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.
Reserve Tank

■
1. Check the amount of coolant in the reserve tank.
2. If the coolant level is below the MIN mark, add coolant until it reaches the MAX mark.Inspect the cooling system for leaks.
3.
Engine Coolant
If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system lushed and reilled with Honda antifreeze/coolant as soon as possible. Do not add rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or with the engine components.
Reserve
Tank
MIN
MAX
Reserve Tank
Main MenuTable of Contents

253
Maintenance
Maintenance Under the Hood Engine Coolant
Radiator
■
1. Make sure the engine and radiator are cool.
Turn the radiator cap counterclockwise and
2.
relieve any pressure in the cooling system. Do not press the cap down when turning. Push down and turn the radiator cap
3.
counterclockwise to remove it. The coolant level should be up to the base
4.
of the filler neck. Add coolant if it is low.
Put the radiator cap back on, and tighten it
5.
fully.Pour coolant into the reserve tank until it
6.
reaches the MAX mark. Put the cap back on the reserve tank.
Pour the fluid slowly and carefully
so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
Radiator
WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.Radiator Cap
Main MenuTable of Contents

298
Handling the Unexpected
Overheating How to Handle Overheating
Next Thing to Do
■
1. Check that the cooling fan is operating and stop the engine once the high temperature indicator goes off.
If the cooling fan is not operating,
immediately stop the engine.
Once the engine has cooled down, inspect
2.
the coolant level and check the cooling system components for leaks.
If the coolant level in the reserve tank is
low, add coolant until it reaches the MAX mark.
If there is no coolant in the reserve tank, check that the radiator is cool. Cover the radiator cap with a heavy cloth and open the cap. If necessary, add coolant up to the base of the filler neck, and put the cap back on.
Last Thing to Do
■
Once the engine has cooled sufficiently, restart it and check the high temperature
•
indicator.
If the high temperature indicator is off, resume driving. If it stays on, contact a dealer for repairs.
Reserve
Tank
MIN
MAX
How to Handle Overheating
If the coolant is leaking, contact a dealer for repairs. Use water as an emergency/temporary measure only. Have a dealer lush the system with proper antifreeze as soon as possible.
WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
Main MenuTable of Contents