2011 HONDA CR-Z key

Quick Reference Guide
24
What to Do If
The ignition switch does not turn from
0 to I. Why?
The steering wheel may be locked.•
• Try to turn the steering wheel left and
right while turning the ignition key.
The ignition switch does not turn from
I to 0 and I
cannot remove the key. Why?
The shift lever should be moved to P on the automatic
transmission (CVT) model.
Why does the brake pedal pulsate slightly when applying the brakes? This can occur when the ABS activates, and does not indicate a problem. Apply firm, steady pressure on the brake pedal. Never pump the brake pedal.
Why do the doors lock after I unlocked the doors using a remote transmitter? If you do not open the doors within 30 seconds, the doors relock automatically.
Main Menu

Quick Reference Guide
25
Why does the beeper sound when I open the driver’s door? The beeper sounds when: The key is left in the ignition switch.
•
The exterior lights are left on.
•
The auto idle stop is in operation.
•
Why does the beeper sound
when I start driving? The beeper sounds when: The driver and/or passenger are not wearing their seat belts.
•
The parking brake lever is not fully released.
•
Why does a screeching sound
occur when I apply the brake pedal? The brake pads may need to be replaced. Have your vehicle inspected by a dealer.
Main Menu

75
Instrument Panel
Indicators
IndicatorName On/Blinking Explanation Message
Lights On Indicator Comes on whenever the light

•
switch is on, or in AUTO when the exterior lights are on. If you remove the key from the

•
ignition switch while the light is on, a chime sounds when the driver’s door is opened.
—
Fog Light Indicator * Comes on when the fog lights are

•
on. ——
Turn Signal IndicatorsThe turn signal indicators blink

•
when you operate the turn signal lever.If you press the hazard warning

•
button, both indicators and all turn signals blink at the same time. Does not blink or blinks rapidly

• -
A turn signal light bulb has blown. Change the bulb immediately. Replacing Light Bulbs P.262, 263—
Immobilizer System IndicatorComes on briefly when you turn

•
the ignition switch to ON
II, then
goes off. Comes on if the immobilizer

•
system cannot recognize the key information. Blinks

• - You cannot start the engine.
Turn the ignition switch to LOCK
0, pull the key out, and then insert
the key and turn it to ON
II again.
Repeatedly blinks

• - The system may
be malfunctioning. Have the vehicle checked by a dealer.Do not attempt to alter this system

•
or add other devices to it. Electrical problems can occur.
—
*Not available on all models
Main MenuTable of Contents

78
Instrument Panel
Indicators Multi-Information Display Warning and Information Messages
Multi-Information Display Warning and Information Messages The following messages appear only on the multi-information display. Press the
(information) button to see the message again
with the system message indicator on.
Message Condition Explanation
Appears when the fuel fill cap is loose or is not

•
installed.
Tighten the Fuel Fill Cap P.301
Appears if there is a problem with the DRL system.

•
Daytime Running Lights P.112
Canadian models only Appears when washer fluid gets low.

• Refilling washer fluid.

•
Refilling Window Washer Fluid P.257
Appears when the scheduled maintenance is due

•
soon. Consequently, “SERVICE DUE NOW” and “SERVICE

•
PAST DUE” follow.
Maintenance Minder ™
P.241
Appears when you open the driver’s door while the

•
ignition key is in ACCESSORY
I. Turn the ignition switch to LOCK

•
0, then
remove the key.
Main MenuTable of Contents

79
Instrument Panel
Indicators Multi-Information Display Warning and Information Messages
Message ConditionExplanation
Appears when the ignition key is turned to

•
ACCESSORY
from ON II. (The driver’s door is
closed.) —
Appears when you open the driver’s door while the

•
ignition key is in LOCK
0. Remove the key from the ignition switch.

•
Appears if the clutch pedal is not fully depressed while
the auto idle stop is in operation, and the engine is ready
to restart. Fully depress the clutch pedal.

•
Auto Idle Stop P.227
Appears when the shift lever is in any forward gear

•
position, and the auto idle stop operating time has continued for a while. Shift to

•
N. Auto Idle Stop P.227
Appears while the auto idle stop is in operation, and

•
to allow the engine to restart again for the following reasons:
The IMA battery charge is low.
•
There is a problem with the system.
• Manually start the engine.

•
Starting the Engine P.197
Main MenuTable of Contents

93
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Setup Group Customizable Features Description Selectable SettingsDoor Setup Auto Door Lock
Changes the setting for the automatic locking feature. Shift from
P (A/T only), With
VEH SPD* 1
, OFF
Auto Door Unlock Changes the setting for when the doors and the hatch unlock automatically. Shift to
P*
2
, IGN off* 3
, OFF
Driver Door* 1
, All Doors
Door Lock Mode Sets up either the driver’s door or both doors and the hatch to unlock on the first push of the remote. Driver Door*
1
All Doors
Key Lock Acknowledgment LOCK/UNLOCK - The exterior lights flash LOCK (2nd push) - The beeper sounds
ON*
1
, OFF
Security Relock Timer Changes the time it takes for the doors and the hatch to relock and the security system to set after you unlock the vehicle without opening either door or the hatch. 90 sec, 60 sec*
1
, 30 sec
Default All Sets/Cancels all the customized settings as default. Set, Cancel
*1: Default Setting *2: Default Setting on automatic transmission (CVT) model*3: Default Setting on manual transmission
Main MenuTable of Contents

Controls
This chapter explains how to operate the various controls necessary for driving.
97
Setting the Clock
....................................... 98
Locking and Unlocking the Doors Key Types and Functions .......................... 99 Locking/Unlocking the Doors from
the Outside ........................................... 100Locking/Unlocking the Doors from
the Inside .............................................. 102
Auto Door Lock/Unlock .......................... 103
Opening and Closing the Hatch ............. 104
Security System ....................................... 105
Immobilizer System ................................ 105
Security Alarm System ............................ 105
Opening and Closing the Windows ....... 107Operating the Switches Around the Steering Wheel
Ignition Switch ....................................... 109
Turn Signals ........................................... 110
Light Switches ........................................ 110Fog Lights * ............................................ 112
Daytime Running Lights .......................... 112
Wipers and Washers ............................... 113
Brightness Control .................................. 115Rear Defogger/Heated Door Mirror *
Button ................................................... 116
Adjusting the Steering Wheel ................. 117 Adjusting the Mirror
Interior Rearview Mirror .......................... 118
Door Mirrors .......................................... 118
Adjusting the Seats Adjusting the Seat Position ..................... 119
Interior Lights/Interior Convenience Items Interior Lights ......................................... 123
Interior Convenience Items ..................... 125
Climate Control System Using Automatic Climate Control ........... 131
Automatic Climate Control Sensors ........ 133
* Not available on all models
Main Menu

99
Controls
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:Keys

■
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch. You can also use the remote transmitter to lock and unlock the doors and hatch.
Key Number Tag

■
Contains a number that you will need if you purchase a replacement key.
Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
Immobilizer System P.1 0 5
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: Do not leave the keys in direct sunlight, or

•
in locations with high temperature or high humidity.Do not drop the keys or set heavy objects on

•
them.Keep the keys away from liquids.

•
Do not take the keys apart except for replacing

•
the battery.
If the circuit in the keys are damaged, the engine may not start, and the remote transmitter may not work.If the keys do not work properly, have them inspected by a dealer.
Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle.If you wish to purchase an additional key, contact your dealer. If you lose your key and you cannot start the engine, contact your dealer.
Key with Remote Transmitter
Main MenuTable of Contents