2011 HONDA CR-Z warning

194
Driving
Before Driving Maximum Load Limit
Maximum Load Limit The maximum load for your vehicle is 400 lbs (181 kg). See Tire and Loading Information label attached to the driver’s doorjamb. This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer. Steps for Determining Correct Load Limit - (1) Locate the statement “The combined weight of occupants and cargo
should never exceed XXX kg or XXX lbs.” on your vehicle’s placard.
(2) Determine the combined weight of the driver and passengers that will
be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX
kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage
load capacity. For example, if the “XXX” amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.)
Maximum Load Limit
Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the
vehicle, all occupants, all accessories, and all cargo.
Specifications P. 3 12
Gross Axle Weight Rating (GAWR): The maximum allowable weight of the vehicle axle.
Specifications P. 3 12
WARNING
Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. Follow all load limits and other loading guidelines in this manual.Label Example
Main MenuTable of Contents

211
Driving
When Driving Cruise Control
Cruise Control Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration.
Cruise Control
When the ignition switch is in ACCESSORY
or
LOCK , cruise control automatically goes off.
It may not be possible to maintain a constant speed when driving uphill or downhill. When climbing a steep hill with the ECON mode, it may take relatively more time to accelerate to maintain the set speed. When not using cruise control, turn off cruise control by pressing the CRUISE button.
Manual transmission While the cruise control system is activated, the shift up or down indicator does not work.
WARNING
Improper use of the cruise control can lead to a crash. Use the cruise control only when traveling on open highways in good weather.When to use
How to use
Ù Vehicle speed for cruise control:
Desired speed in a range above roughly 25 mph (40 km/h). Always keep sufcient distance between you and the vehicle in front of you.
CRUISE MAIN is on in the instrument panel. Cruise control is ready to use.
Automatic transmission model
Ù Press the CRUISE button on the
steering wheel.
Main MenuTable of Contents

219
Driving
Braking
Brake System
Parking Brake
■
Use the parking brake to keep the vehicle stationary when parking.
To apply: Pull the lever fully up without pressing the release button. To release:
Pull the lever slightly, and press and hold
1.
the release button. Lower the lever down all the way, then
2.
release the button.
Parking Brake
NOTICE Release the parking brake fully before driving. The rear brakes and axle can be damaged if you drive with the parking brake applied. If you start driving without fully releasing the parking brake, a buzzer sounds as a warning, and "RELEASE PARKING BRAKE" appears on the multi-information display. Always apply the parking brake when parking.When the outside temperature is extremely cold, do not apply the parking brake to prevent it from freezing, and do the following:
Automatic transmission model Put the shift lever in , then place a block or other
wheel chock to stop the wheels from turning.
Manual transmission model Put the shift lever in or , then place a block
or other wheel chock to stop the wheels from turning.
Main MenuTable of Contents

232
Driving
Refueling How to Refuel
How to Refuel
How to Refuel
WARNING
Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.Stop the engine, and keep heat,
•
sparks, and flame away.Handle fuel only outdoors.
•
Wipe up spills immediately.
•
1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear. Turn off the engine.
2.
Press the area indicated by the arrow to
3.
release the fuel fill door. You will hear a click.
4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.Fuel Fill Door
PushPush
Cap
Main MenuTable of Contents

235
Driving
Accessories and Modiications
Accessories
When installing accessories, check the following:Do not install accessories on the windshield. They can obstruct your view and

•
delay your reaction to driving conditions. Do not install accessories on the side pillars or across the side windows.

•
Accessories installed in these areas may interfere with proper operation of the side curtain airbags. Be sure electronic accessories do not overload electrical circuits or interfere with

•
proper operation of your vehicle.
Fuse P.304
Before installing any electronic accessory, have the installer contact a dealer for

•
assistance. If possible, have a dealer inspect the final installation.
Modiications Do not modify your vehicle or use non-Honda components that can affect its handling, stability, and reliability.Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.
Accessories and Modiications
Use Honda Genuine accessories to ensure proper operation on your vehicle.
Contact your dealer when purchasing and installing parts and accessories.
WARNING
Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed. Follow all instructions in this owner’s manual regarding accessories and modifications.
Main MenuTable of Contents

239
Maintenance
Before Performing Maintenance Safety When Performing Maintenance
Safety When Performing Maintenance
Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.Maintenance Safety

■
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames
•
away from the battery and all fuel related parts. To clean parts, use a commercially available degreaser or parts cleaner, not
•
gasoline.Wear eye protection and protective clothing when working with the 12 volt
•
battery or compressed air.Engine exhaust gasses contain carbon monoxide, which is poisonous and can kill
•
you.
Only operate the engine if there is sufficient ventilation.
Vehicle Safety

■
The vehicle must be in a stationary condition.
•
Make sure your vehicle is parked on level ground, the parking brake is set,
and the engine is off.
Be aware that hot parts can burn you.
•
Make sure to let the engine and exhaust system cool thoroughly before
touching vehicle parts.
Be aware that moving parts can injure you.
•
Do not start the engine unless instructed, and keep your hands and limbs
away from moving parts.
Do not touch the IMA battery and wirings (orange).
•
Safety When Performing Maintenance

WARNING
Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed. Always follow the inspection and maintenance recommendations according to the schedules in this owner’s manual.
WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed. Always follow the procedures and precautions in this owner’s manual.
Main MenuTable of Contents

253
Maintenance
Maintenance Under the Hood Engine Coolant
Radiator
■
1. Make sure the engine and radiator are cool.
Turn the radiator cap counterclockwise and
2.
relieve any pressure in the cooling system. Do not press the cap down when turning. Push down and turn the radiator cap
3.
counterclockwise to remove it. The coolant level should be up to the base
4.
of the filler neck. Add coolant if it is low.
Put the radiator cap back on, and tighten it
5.
fully.Pour coolant into the reserve tank until it
6.
reaches the MAX mark. Put the cap back on the reserve tank.
Pour the fluid slowly and carefully
so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
Radiator
WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.Radiator Cap
Main MenuTable of Contents

269
Maintenance
Checking and Maintaining Tires
Checking Tires To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated.Inflation Guidelines
■
Properly inflated tires provide the best combination of handling, tread life, and
comfort. Refer to the driver’s doorjamb label or specification’s page for the specified pressure. Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating. Overinflated tires make your vehicle ride harshly, are more prone to road hazard, and wear unevenly. Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge. At least once a month or before long trips, use a gauge to measure the pressure in all tires, including the spare. Even tires in good condition can lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm 2
) per month.
Inspection Guidelines
■
Every time you check inflation, also examine the tires and valve stems.Look for:
Bumps or bulges on the side or in the tread. Replace the tire if you find any.
•
Cuts, splits, or cracks in the side of the tire. Replace it if you see fabric or cord.Remove any foreign objects and inspect for air leaks.
•
Uneven tread wear. Have your dealer check the wheel alignment.
•
Excessive tread wear.
•
Wear Indicators P.274
Checking Tires
Measure the air pressure when tires are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). If necessary, add or release air until the speciied pressure is reached. If checked when hot, tire pressure can be as mush as 4–6 psi (30–40 kPa, 0.3–0.4 kgf/cm 2
) higher
than if checked when cold.
Have a dealer check the tires if you feel a consist ent
vibration while driving. New tires and any that have been removed and reinstalled should be properly balanced.
WARNING
Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed. Follow all instructions in this owner’s manual regarding tire inflation and maintenance.
Main MenuTable of Contents