2011 HONDA CR-Z light

92
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
List of Customizable Options
■
Setup Group Customizable Features Description Selectable Settings
Meter Setup Language Selection Changes the displayed language. English*
1
, French, Spanish
Adjust outside temp. display Adjusts the temperature reading by a few degrees. -5°F ~ ±0°F*
1
~ +5°F (U.S.)
-3°C ~ ±0°C* 1
~ +3°C (Canada)
Trip A Reset with Refuel Sets Trip A and the average fuel economy to reset when you refuel. ON, OFF*
1
Elapsed Time Reset Changes the resetting conditions of the elapsed time. IGN OFF*
1
, Trip A, Trip B
Hold ECON Mode Maintains ECON mode. ON, OFF* 1
Meter Color Change Turns the ambient meter feature on and off. ON* 1
, OFF
Display Km/Miles Changes the displayed measurement on the multi-information display. AUTO*
1
, KM, MILES
Lighting Setup Interior Light Dimming Time
Changes the length of time the interior lights stay on after you close the doors.
60 sec, 30 sec*
1
, 15 sec
Auto Light Sensitivity* 2
Changes the timing for the headlights to come on. Max, High, Mid*
1
, Low, Min
*1: Default Setting*2: If equipped
Main MenuTable of Contents

93
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Setup Group Customizable Features Description Selectable SettingsDoor Setup Auto Door Lock
Changes the setting for the automatic locking feature. Shift from
P (A/T only), With
VEH SPD* 1
, OFF
Auto Door Unlock Changes the setting for when the doors and the hatch unlock automatically. Shift to
P*
2
, IGN off* 3
, OFF
Driver Door* 1
, All Doors
Door Lock Mode Sets up either the driver’s door or both doors and the hatch to unlock on the first push of the remote. Driver Door*
1
All Doors
Key Lock Acknowledgment LOCK/UNLOCK - The exterior lights flash LOCK (2nd push) - The beeper sounds
ON*
1
, OFF
Security Relock Timer Changes the time it takes for the doors and the hatch to relock and the security system to set after you unlock the vehicle without opening either door or the hatch. 90 sec, 60 sec*
1
, 30 sec
Default All Sets/Cancels all the customized settings as default. Set, Cancel
*1: Default Setting *2: Default Setting on automatic transmission (CVT) model*3: Default Setting on manual transmission
Main MenuTable of Contents

Controls
This chapter explains how to operate the various controls necessary for driving.
97
Setting the Clock
....................................... 98
Locking and Unlocking the Doors Key Types and Functions .......................... 99 Locking/Unlocking the Doors from
the Outside ........................................... 100Locking/Unlocking the Doors from
the Inside .............................................. 102
Auto Door Lock/Unlock .......................... 103
Opening and Closing the Hatch ............. 104
Security System ....................................... 105
Immobilizer System ................................ 105
Security Alarm System ............................ 105
Opening and Closing the Windows ....... 107Operating the Switches Around the Steering Wheel
Ignition Switch ....................................... 109
Turn Signals ........................................... 110
Light Switches ........................................ 110Fog Lights * ............................................ 112
Daytime Running Lights .......................... 112
Wipers and Washers ............................... 113
Brightness Control .................................. 115Rear Defogger/Heated Door Mirror *
Button ................................................... 116
Adjusting the Steering Wheel ................. 117 Adjusting the Mirror
Interior Rearview Mirror .......................... 118
Door Mirrors .......................................... 118
Adjusting the Seats Adjusting the Seat Position ..................... 119
Interior Lights/Interior Convenience Items Interior Lights ......................................... 123
Interior Convenience Items ..................... 125
Climate Control System Using Automatic Climate Control ........... 131
Automatic Climate Control Sensors ........ 133
* Not available on all models
Main Menu

99
Controls
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:Keys

■
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch. You can also use the remote transmitter to lock and unlock the doors and hatch.
Key Number Tag

■
Contains a number that you will need if you purchase a replacement key.
Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
Immobilizer System P.1 0 5
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: Do not leave the keys in direct sunlight, or

•
in locations with high temperature or high humidity.Do not drop the keys or set heavy objects on

•
them.Keep the keys away from liquids.

•
Do not take the keys apart except for replacing

•
the battery.
If the circuit in the keys are damaged, the engine may not start, and the remote transmitter may not work.If the keys do not work properly, have them inspected by a dealer.
Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle.If you wish to purchase an additional key, contact your dealer. If you lose your key and you cannot start the engine, contact your dealer.
Key with Remote Transmitter
Main MenuTable of Contents

100
Controls
Locking and Unlocking the Doors Locking/Unlocking the Doors from Outside
Locking/Unlocking the Doors from the Outside
Using the Remote Transmitter
■
■ Locking the Vehicle
Press the LOCK button. Once:
Some exterior lights will flash, all the
doors and hatch will lock, and the security system sets.
Twice (within five seconds after the first push):
A beeper sounds and verifies the security system is set.
Unlocking the Vehicle
■
Press the UNLOCK button. Once:
Some exterior lights will flash twice, and
the driver’s door unlocks.
Twice:
The passenger’s door and the hatch unlock.
Panic Mode
■
If you press the panic button for approximately one second, the following will occur:
The horn sounds.
•
Some exterior lights flash for about 30 seconds.
•
Canceling Panic Mode
■
Press any button on the remote transmitter, or turn the ignition switch to ON
II.
Using the Remote Transmitter
Open the door or the hatch within 30 seconds. If you do not open a door or the hatch within 30 seconds of unlocking the vehicle with the remote transmitter, the doors and the hatch will automatically relock. If the light control switch is in the door activated position, the interior lights come on when you press the UNLOCK button.No doors opened: The lights fade out after 30 seconds.Doors relocked with the remote: The lights go off immediately.
Interior Lights P.12 3
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings. The remote transmitter will not work when the key is in the ignition switch. The remote will not lock the vehicle when a door or the hatch is open. If the distance at which it works varies, the battery is probably low.If the LED does not come on when you press a button, the battery is dead.
Replacing the Battery P. 2 7 9
Lock Button
Panic Button
Unlock Button LED
Main MenuTable of Contents

105
Controls
Security System
Immobilizer System
Immobilizer System
NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle.Always take the ignition key with you whenever you leave the vehicle unattended. Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key. Pay attention to the following when inserting the key to the ignition switch.Do not allow objects that emit strong radio waves near the ignition switch.
•
Make sure the key is not covered by or touching a metal object.
•
Do not bring a key from another vehicle’s immobilizer system near the ignition
•
switch.
Security Alarm System The security alarm system activates when the doors, hatch, or hood are opened without the key, or remote transmitter. It also activates if you turn the ignition switch to ON
II after locking the doors and the hatch with the remote transmitter.
When the Security Alarm System Activates
■
The horn beeps intermittently, and all of the exterior lights flash.
To Deactivate the Security Alarm System
■
Unlock the vehicle using the key, or remote transmitter. The system, along with the horn and flashing lights, are deactivated.
Security Alarm System
The security alarm continues for a maximum of two minutes until the security alarm system deactivates.
continued
Main MenuTable of Contents

107
Controls
Opening and Closing the Windows
Opening/Closing the Power Windows
Opening/Closing the Power Windows
The auto-reverse function stops sensing when the window is almost closed to ensure that it fully closes. The power windows can be operated for up to 10 minutes after you turn the ignition switch off.Opening either door cancels this function. Auto Reverse If a power window senses resistance when closing automatically, it will stop closing, and reverse direction. The driver’s window auto reverse function is disabled when you continuously pull up the switch.
WARNING
Closing a power window on someone’s hands or fingers can cause serious injury. Make sure your passenger is away from the window before closing it.
The power windows can be opened and closed when the ignition switch is in ON
II, using the switches on the doors. The driver side switch can be used to open and
close both windows. The main switch on the driver side must be switched off (not pushed in) to open and close the passenger’s window from the passenger side. When the main switch is turned on (pushed in), you can only operate the passenger’s window from the driver’s seat. Turn the main switch on if a child rides in the passenger’s seat.
Opening/Closing the Driver’s Window

■
■ Automatic Operation
To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.
Manual Operation
■
To open: Push the switch down lightly.
To close: Pull the switch up lightly.
Release the switch when the window reaches the desired position.
On
Main Switch
Passenger’s Window Switch
Driver’s Window Switch Off
Main MenuTable of Contents

110
Controls
Operating the Switches Around the Steering Wheel Turn Signals Light Switches
Turn Signals
The turn signals can be used when the ignition switch is in ON
II.
Light Switches Manual Operation

■
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.
Low Beams
■
Rotate the light switch to
.
High Beams
■
Push the lever forward until you hear a click. Pull the lever back to return to low beams.
Flashing the High Beams
■
Pull the lever back and release it.
Right Turn
Left Turn
Light Switches
If you remove the key with the lights on, a lights on
reminder chime will sound. When the lights are on, the lights on indicator in the instrument panel will be on.
Indicators P. 6 8
Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs.If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer. Do not leave the lights on when the engine is off because it will cause the battery to discharge.
H igh Beam s
Lo w B eam s
Flashing

the high beam s
Turns on parking, side marke r,
tail, and license plate lights Tu rns on headlights, parking,
side marker, tail, and license plate lights
Main MenuTable of Contents