2011 HONDA CR-Z display

83
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Multi-Information Display
The multi-information display shows the odometer, trip meter, outside temperature, and other fuel economy information.It also displays important messages such as warnings and other helpful information.Switching the Display

■
Press the button or the SEL/RESET button to change the display.
Eco Guide feedback with Eco Drive Bar
OFF
HFL *
Customizable Setting Entry Engine Oil Life Power Flow
MonitorAverage Vehicle SpeedElapsed Time
Average Fuel Economy Records
Average Fuel Economy A
Range
SEL/RESET Button
(Information) Button Shown when
Bluetooth®

HandsFreeLink ®
is activated.
* Not available on all models
Main MenuTable of Contents

84
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Odometer
■
Shows the total number of miles or kilometers that your vehicle has accumulated.
Trip Meter

■
Shows the total number of miles or kilometers driven since the last reset. Meters A and B can be used to measure 2 separate trips.
Resetting a Trip Meter
■
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to “0.0”.
Outside Temperature

■
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Adjusting the Outside Temperature Display
■
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.Use the multi-information display’s customized features to correct the temperature.
Customizing Features P.90
Trip B
Trip A
Odometer
Outside Temperature
Trip Meter
Switch between trip meter A and trip meter B by pressing the SEL/RESET button.
Outside Temperature
The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h). It may take several minutes for the display to be updated after the temperature reading has stabilized.
Main MenuTable of Contents

85
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Eco Assist Scoring (Real-Time Score)/Eco Guide Feedback
■

■ Real-Time Score
The Eco assist scoring system is a point system you can use to monitor your driving style and its impact on fuel economy. Points are represented by leaf icons on the multi-information display. Leaves are:
Accumulated when your driving style is fuel
•
efficient.Deducted when your style is not fuel
•
efficient.
Reset the System
■
To clear all leaves and lifetime points, complete the following steps within 30 seconds, and do not run the engine.
Automatic transmission (CVT): The shift lever must be in
1.
P.
Manual transmission: The parking brake must be set. Turn the ignition switch to ON
2.
II.
Make sure the NORMAL mode is selected.
3.
Depress the brake pedal twice.
4.
The ambient meter color changes from blue to green.
When the “meter color change” setting on the multi-information display is
off, the color stays in blue.
Press the ECON mode button.
5.
Press the NORMAL mode button.
6.
The ambient meter color turns off.
Turn the ignition switch to LOCK
7.
0.
1st Stage
Leaf Icon
2nd Stage 3rd Stage
Reset the System
If the ECON mode is on in step 2, press the NORMAL mode button. Turn the ignition switch to LOCK
, then go to step 1.
continued
Main MenuTable of Contents

86
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Eco Guide Feedback with Eco Drive Bar
■
The bar extends to the right or left of the center line while driving. The more aggressive the acceleration is, the further the bar extends to the right. The more aggressive the deceleration is, the further the bar extends to the left. Keep the bar near the center line for better fuel economy while driving.
Eco Guide Feedback with Eco Drive Bar
Automatic Transmission (CVT) model The ambient meter color changes corresponding to the level of eco drive bar extension.
Deceleration
Moderate Deceleratio nModerate Acceleration
High Fuel Economy High Fuel Economy
Aggressive Deceleration Aggressive Acceleration Acceleration
Main MenuTable of Contents

87
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Average Fuel Economy Records
■
Shows the average fuel economy for the last three driving cycles (1-3), and the current driving cycle (0) in mpg or l/100 km. Each time you turn the ignition switch to ON
II, the display is updated, and the oldest
record is deleted.
Average Fuel Economy

■
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, its average fuel economy is also reset at the same time.
Range

■
Shows the estimated distance you can travel on the fuel remaining. This distance is estimated from the fuel economy of your trips in the past.
Elapsed Time

■
The elapsed time display shows the time during one drive cycle.
Average Speed

■
The display shows the average speed in mph or km/h since the last time Trip A was reset.
Past Average Fuel Economy
Latest Average Fuel Economy
Average Fuel Economy
You can choose to reset either Trip A or average fuel economy A when you refuel.
Customized Features P.90
Elapsed Time
You can change the elapsed time reset criteria.
Customized Features P. 9 0
Main MenuTable of Contents

88
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Power Flow Monitor
■
Displays engine and electric motor power flow – whether the system is assisting the engine or charging the battery.
Power Flow Monitor
The displayed power low may not correspond to the ASST/CHRG indicators directly.
Electric Motor Assist Indicator (ASST) P. 8 2 Battery Charge in Progress (CHRG) P. 8 2
Operating
Not operating
Engine Operation IconPower Flow
Power is supplied with the engine and the electric motor is assisting the engine.
The electric motor is charging the IMA
battery.
Power is supplied with only the engine.
Power is supplied with only the engine and the electric motor is charging the
IMA battery.
Main MenuTable of Contents

89
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Engine Oil Life
■
Shows the remaining oil life and Maintenance Minder ™
.
Maintenance Minder ™
P.241
Bluetooth

■®
HandsFreeLink ®
*
Shows your paired cell phone’s information.
Bluetooth ®
HandsFreeLink ®
P.173
* Not available on all models
Main MenuTable of Contents

90
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Customized Features
■
Use the multi-information display to customize certain features.
How to Customize
■
Select the “CUSTOMIZE SETTINGS” screen by pressing the
button while
the ignition switch is in ON
II, the shift lever is in P (CVT), and the parking brake
is set (manual transmission). The screen switches to “CHG SETTING.”
Customized Features
To select customizing items, press the SEL/RESET button on the "CHG SETTING" screen, then press the
button.
List of Customizable Options P. 9 2 Example of Cutomization Settings P. 9 4
When you customize settings:
Automatic transmission (CVT) model
Shift to .
Manual transmission model Set the parking brake.
(Information) Button:
Changes the customize menus and items. Multi-Information Display: Goes to customize settings.
SEL/RESET Button: Enters the selected item.
Main MenuTable of Contents