2011 HONDA CR-Z reset

92
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
List of Customizable Options
■
Setup Group Customizable Features Description Selectable Settings
Meter Setup Language Selection Changes the displayed language. English*
1
, French, Spanish
Adjust outside temp. display Adjusts the temperature reading by a few degrees. -5°F ~ ±0°F*
1
~ +5°F (U.S.)
-3°C ~ ±0°C* 1
~ +3°C (Canada)
Trip A Reset with Refuel Sets Trip A and the average fuel economy to reset when you refuel. ON, OFF*
1
Elapsed Time Reset Changes the resetting conditions of the elapsed time. IGN OFF*
1
, Trip A, Trip B
Hold ECON Mode Maintains ECON mode. ON, OFF* 1
Meter Color Change Turns the ambient meter feature on and off. ON* 1
, OFF
Display Km/Miles Changes the displayed measurement on the multi-information display. AUTO*
1
, KM, MILES
Lighting Setup Interior Light Dimming Time
Changes the length of time the interior lights stay on after you close the doors.
60 sec, 30 sec*
1
, 15 sec
Auto Light Sensitivity* 2
Changes the timing for the headlights to come on. Max, High, Mid*
1
, Low, Min
*1: Default Setting*2: If equipped
Main MenuTable of Contents

94
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Example for Customizing Settings
■
The steps for changing the “Trip A reset with refuel” setting to ON are shown below. The default setting for “Trip A reset with refuel” is OFF.
1. Press the
button until
“CUSTOMIZE SETTINGS” appears on the display, then press the SEL/RESET button to go into the “CHG SETTING” group.
2. Press the SEL/RESET button to go into the “METER SETUP” group.
3. Press the SEL/RESET button again.
“LANGUAGE SELECTION” appears first
in the display.
Main MenuTable of Contents

95
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
4. Press the
button until “TRIP
A RESET with REFUEL” appears on the display, then press the SEL/RESET button.
The display switches to the
“Customization setup” screen, where you can select “ON,” “OFF,” or “EXIT.”
5. Press the
button and select “ON”,
then press the SEL/RESET button.
The “ON” setup screen appears, then the display returns to the “Customization menu” screen.
6. Press the
button until “EXIT”
appears in the display, then press the SEL/ RESET button.Repeat step 6 until you return to the
7.
normal screen.
Main MenuTable of Contents

98
Controls
Setting the Clock
Clock
Models without navigation system
You can adjust the time in the clock display, using the CLOCK (AM/FM) button.Adjusting the Time

■
Press and hold the CLOCK button until the clock display begins to blink.
1.
Press the
2.
1 (Hour) button to change the hours.
Press the
3.
2 (Minute) button to change the minutes.
Press the CLOCK button to go back to the normal display.
4.
Button
Button
Button
(Power) Button
Clock Display
CLOCK Button
3
Clock
To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the
3 (Reset)
button. Depending on the displayed time, the clock sets forward or backward.Example:1:06 will reset to 1:001:53 will reset to 2:00
Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
Main MenuTable of Contents

140
Features
Audio System Audio System Theft Protection
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the 12 volt battery is disconnected or goes dead.Entering the Audio Security Code
■
“ENTER CODE” appears on the display when the power is reconnected.
Turn on the audio system.
1.
Enter the security code using the preset buttons.
2.
Models with navigation system
Touch the icon to enter the code, then touch the Done icon to set it. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information from a dealer.
Main MenuTable of Contents

143
Features
Audio without Navigation System Playing the AM/FM Radio
Playing the AM/FM Radio
(Power) Button
Press to turn the audio
system ON and OFF.
VOL/SELECT Knob
Turn to adjust the volume.
Turn to tune the radio frequency. Preset Buttons (1-6)To
store the station:
1. Tune to the selected station.
2. Pick a preset button and hold it until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
FM/AM ButtonPress to select a band.
TITLE ButtonPress to switch the RDS name
on and off.
/ Button Press to display and select an
RDS category.
SCAN ButtonPress to sample the strongest stations on the selected band for 10 seconds each. To turn off scan, press the button again.
SEEK Buttons •
Press to change a station.
• Press and hold to search up and down the selected band for a station with a strong signal. A.SEL (Auto Select) ButtonPress to scan both bands and store the strongest station in each preset.To
turn off auto select, press the
button again. This restores the presets you originally set.
Main MenuTable of Contents

144
Features
Audio without Navigation System Playing the AM/FM Radio
Radio Data System (RDS)
■
Provides text data information related to your selected RDS capable FM station.
RDS INFO ON
■
Press the TITLE button while listening to an RDS capable station. “RDS INFO ON” appears, and the station name is displayed.
To Find an RDS Station from Your Selected Program

■
Category
1. Press the
/ button to
display and select an RDS category. Use the SEEK
2. or SCAN function to select
an RDS station.
Playing the AM/FM Radio
A stereo indicator (ST) comes on the display for stereo FM broadcasts. Stereo reproduction in AM is not available. Switching the Audio Mode Press the MODE button on the steering wheel.
Audio Remote Controls P.1 6 9
You can store six AM stations and twelve FM stations in the preset buttons. FM1 and FM2 let you store six stations each. A.SEL function scans and stores up to six AM stations and twelve FM stations with a strong signal in the preset buttons. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons manually.
Radio Data System (RDS)
The display shows up to 31 characters of text data. Press and hold the TITLE button to see additional characters.
indicates that the text data
continues. The display goes back to the previous screen if you press and hold the button again.
RDS Category
Main MenuTable of Contents

154
Features
Audio with Navigation System Playing the AM/FM Radio
Playing the AM/FM Radio
Preset Buttons (1-6) To store the station:
1. Tune to the selected station.
2. Pick a preset button and hold it until you hear a beep.
To listen to a stored station, select a band,
then press the preset button. Joystick
Navigation Display
AUTO SEL (Auto Select) Icon
Touch to scan both bands and store the strongest station in each preset.To turn off auto select, touch it
again. This restores the presets you originally set.
AM/FM ButtonPress to change the band.
AUDIO ButtonPress to display the audio mode on the navigation screen. VOL/PWR (Volume/Power) Knob
Press to turn the audio system
ON and OFF.
Turn to adjust the volume.
TUNE Bar• Press either side to select a station.
• Press and hold to search for a station with a strong signal up and down the selected band.
SCAN ButtonPress to sample the strongest stations on the selected band for 10 seconds each.To
turn off scan, press it again. FM1/FM2/AM Icon
Touch to select the band.
Main MenuTable of Contents