2011 DODGE CHALLENGER Owners Manual

Page 305 of 490

DODGE CHALLENGER 2011 3.G Owners Manual Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds
within posted speed limits. Where speed limits or condi-
tions are such that the vehicle can be driven at high

Page 306 of 490

DODGE CHALLENGER 2011 3.G Owners Manual vehicle has an option for a spare tire matching original
equipment tire and wheel, refer to the recommended tire
rotation pattern in “Tire Rotation Recommendations” in
“Starting and Operating”

Page 307 of 490

DODGE CHALLENGER 2011 3.G Owners Manual Since this tire has limited tread life the original equip-
ment tire should be repaired (or replaced) and reinstalled
on your vehicle at the first opportunity.
Do not install a wheel cover or attempt

Page 308 of 490

DODGE CHALLENGER 2011 3.G Owners Manual your original equipment tire, replace (or repair) the
original equipment tire and reinstall on the vehicle at the
first opportunity.
WARNING!
Limited-use spares are for emergency use only. In-
stallat

Page 309 of 490

DODGE CHALLENGER 2011 3.G Owners Manual These indicators are molded into the bottom of the tread
grooves. They will appear as bands when the tread depth
becomes 1/16 in (2 mm). When the tread is worn to the
tread wear indicators, the tire s

Page 310 of 490

DODGE CHALLENGER 2011 3.G Owners Manual Replacement Tires
The tires on your new vehicle provide a balance of many
characteristics. They should be inspected regularly for
wear and correct cold tire inflation pressure. The manu-
facturer stro

Page 311 of 490

DODGE CHALLENGER 2011 3.G Owners Manual WARNING! (Continued)
•Failure to equip your vehicle with tires having
adequate speed capability can result in sudden tire
failure and loss of vehicle control.
CAUTION!
Replacing original tires with

Page 312 of 490

DODGE CHALLENGER 2011 3.G Owners Manual CAUTION! (Continued)
•Do not drive for prolonged period on dry pave-
ment.
•Observe the tire chain manufacturer’s instructions
on the method of installation, operating speed,
and conditions for