89
Locking and Unlocking the Doors
Continued
Controls
Key Types and Functions
All of the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
Immobilizer System
P. 9 8
The keys contain precision electronics.
Adhere to the following advice to prevent damage
to the electronics:
Do not leave the keys in direct sunlight, or in
tlocations with high temperature or high humidity.
Do not drop the keys or set heavy objects on tthem.
Keep the keys away from liquids. tDo not take the keys apart except for replacing tthe battery.
If the circuits in the keys are damaged, the engine
may not start, and the remote transmitter may not
work.
If the keys do not work properly, have them
inspected by a dealer.
If the key is not fully extended, the immobilizer
system may not work properly, and the engine may
not start.
Avoid contact with the key whenever it extends or
retracts.
Use the keys to start and stop the engine,
and to lock and unlock all the doors, trunk,
and fuel fill door. You can also use the
remote transmitter to lock and unlock the
doors, trunk, and fuel fill door. Models with a driving position system The seat automatically moves to the preset
position when you unlock the door using the
remote transmitter on the master key.
Driving Position Memory System
P.111
The master key folds up inside the remote
transmitter.
1. Press the release button to release the key
out from the transmitter.
Make sure to fully extend the key.
2. To close the key, press the release button
then push the key inside the transmitter
until you hear a click.
Key Types and FunctionsThis vehicle comes with the following keys:
Retractable Master KeysPanic Button
Lock
ButtonUnlock
Button Trunk Button
Release
ButtonRelease
ButtonPress
Before Performing Maintenance
222Maintenance
Inspection and MaintenanceFor your safety, perform all listed inspections and maintenance to keep your
vehicle in good condition. If you become aware of any abnormality (noise, smell,
insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected
by a dealer. (Note, however, that service at a dealer is not mandatory to keep
your warranties in effect.) Refer to the separate maintenance booklet for detailed
maintenance and inspection information.
Types of Inspection and Maintenance Daily inspections
Perform inspections before long distance trips, when washing the vehicle, or when
refueling. Periodic inspections
Check the automatic transmission fluid level monthly. t
Automatic Transmission Fluid
P. 2 4 2
Check the brake fluid level monthly. t
Brake/Clutch Fluid
P. 2 4 4
Check the tire pressure monthly. Examine the tread for wear and foreign t
objects.
Checking and Maintaining Tires
P. 2 5 9
Check the operation of the exterior lights monthly. t
Replacing Light Bulbs
P. 2 4 7
Check the condition of the wiper blades at least every six months. t
Checking and Maintaining Wiper Blades
P. 2 5 7
Inspection and Maintenance U.S. models Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment
or individuals using parts that are "certified"
to EPA standards.
According to state and federal regulations, failure
to perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all maintenance services
should be performed in accordance with the
intervals indicated by the multi-information display.
Maintenance Service Items
P. 2 2 7
If you want to perform complex maintenance tasks
that require more skills and tools, purchase the
service manual.
Authorized Manual
P. 3 13
If you want to perform maintenance yourself, make
sure that you have the necessary tools and skills
first.
After performing maintenance, update the records
in the separate maintenance booklet.
Maintenance Under the Hood
Engine Coolant
240Maintenance
6-cylinder models 1. Remove the right-side engine compartment
cover.
Engine Compartment Covers
P. 2 3 3
All models 2. Check the amount of coolant in the
reserve tank.
3. If the coolant level is below the MIN mark,
add the specified coolant until it reaches
the MA X mark.
4. Inspect the cooling system for leaks.
Reserve Tank
Engine Coolant 4-cylinder models NOTICE You will need a more concentrated coolant if you
are driving in extremely cold temperature below
-31 °F (-35 °C). Consult your Acura dealer for details
about a suitable coolant mixture.
If Honda antifreeze/coolant is not available, you
may use another major brand non-silicate coolant
as a temporary replacement. Check that it is a
high quality coolant recommended for aluminum
engines. Continued use of any non-Honda coolant
can result in corrosion, causing the cooling system
to malfunction or fail. Have the cooling system
flushed and refilled with Honda antifreeze/coolant
as soon as possible.
Do not add rust inhibitors or other additives to
your vehicle's coolant system. They may not be
compatible with the coolant or with the engine
components.
Engine CoolantThis coolant is premixed with 50% antifreeze and 50% water. Do not add any
straight antifreeze or water.
We recommend you check the engine coolant level every time you refuel. Check
the reserve tank first. If it is completely empty, also check the coolant level in the
radiator. Add the engine coolant accordingly.Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
Reserve Tank MAX MIN Reserve Tank
259
Checking and Maintaining Tires
Maintenance
Checking TiresTo safely operate your vehicle, your tires must be of the proper type and size, in
good condition with adequate tread, and properly inflated.
Inflation guidelines
Properly inflated tires provide the best combination of handling, tread life, and
comfort. Refer to the driver’s doorjamb label or specification’s page for the
specified pressure.
Underinflated tires wear unevenly, adversely affect handling and fuel economy,
and are more likely to fail from overheating.
Overinflated tires make your vehicle ride harshly, are more prone to road hazard,
and wear unevenly.
Every day before you drive, look at each of the tires. If one looks lower than the
others, check the pressure with a tire gauge.
At least once a month or before long trips, use a gauge to measure the pressure in
all tires, including the spare. Even tires in good condition can lose 1 to 2 psi (10 to
20 kPa, 0.1 to 0.2 kgf/cm
2) per month.
Inspection guidelines
Every time you check inflation, also examine the tires and valve stems.
Look for:
Bumps or bulges on the side or in the tread. Replace the tire if you find any t
cuts, splits, or cracks in the side of the tire. Replace it if you see fabric or cord.
Remove any foreign objects and inspect for air leaks. t
Uneven tread wear. Have your dealer check the wheel alignment. t
Excessive tread wear. t
Wear Indicators
P. 2 6 4
Cracks or other damage around valve stem. t
WARNING
Using tires that are excessively worn or
improperly inflated can cause a crash
in which you can be seriously hurt or
killed.
Follow all instructions in this owner’s
manual regarding tire inflation and
maintenance. Checking Tires
Measure the air pressure when tires are cold. This
means the vehicle has been parked for at least
three hours, or driven less than 1 mile (1.6 km).
If necessary, add or release air until the specified
pressure is reached.
If checked when hot, tire pressure can be as mush
as 4 – 6 psi (30 – 40 kPa, 0.3– 0.4 kgf/cm
2) higher
than if checked when cold.
Have a dealer check the tires if you feel a consistent
vibration while driving. New tires and any that have
been removed and reinstalled should be properly
balanced.
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
To o l s ..................................................... 276
Types of Tools .....................................276
If a Tire Goes Flat ................................ 277
Changing a Flat Tire ........................... 277
Engine Does Not Start
Checking the Engine .......................... 283
Jump Starting ..................................... 284
Shift Lever Does Not Move ............... 287
Overheating ........................................ 288
How to Handle Overheating .............. 288Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator
Comes On ........................................ 290
If the Charging System Indicator
Comes On ........................................ 290
If the Malfunction Indicator Lamp
Comes On or Blinks .......................... 291
If the Brake System Indicator
Comes On ........................................ 292
If the EPS Indicator Comes On ........... 292
If the Low Tire Pressure/ TPMS Indicator
Comes On or Blinks .......................... 293Fuses
Fuse Locations ................................... 294
Inspecting and Changing Fuses .......... 297
Emergency Towing ............................. 298
When You Cannot Unlock the Fuel
Fill Door ............................................. 299
When You Cannot Open the
Trunk .................................................. 300
275