2011 Acura TSX reset

Audio System Basic Operation
Playing the AM/FM Radio
143
Features
Continued
Playing the AM/FM Radio
AM/FM Button
Press to select a band.
TITLE Button
Press to switch the RDS name
on and off.
CATEGORY Bar
Press either side to display and
select an RDS category.
SCAN Button
Press to sample each of the strongest stations
on the selected band for 10 seconds.
To turn off scan, press the button again.
VOL /
Knob
Press to turn the audio system ON and OFF.
Turn to adjust the volume.
Preset Buttons (1-6)
To store a station:
1. Tune to the selected station.
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
SKIP Bar
Press and hold to search up and
down the selected band for a station
with a strong signal.
A.SEL (Auto Select) Button
Press to scan both bands and store
the strongest station in each preset.
To turn off auto select, press the
button again. This restores the
presets you originally set.
Selector Knob
Turn to tune the radio frequency.

Audio System Basic Operation
Playing the AM/FM Radio
144Features
Radio Data System (RDS)
Provides text data information related to your selected RDS capable FM station.
RDS INFO ON
Press the TITLE button while listening to an RDS capable station. "RDS INFO ON"
appears, and the station name is displayed. To find an RDS station from your selected program category
RDS Category
1. Press the CATEGORY bar to display and
select an RDS category.
2. Use SKIP or SCAN to select an RDS
station.
Playing the AM/FM RadioThe ST indicator appears on the display indicating
stereo FM broadcasts.
Stereo reproduction in AM is not available.
Switching the Audio Mode
Press the MODE button on the steering wheel.
Audio Remote Controls


P. 1 6 0
You can store six AM stations and twelve FM
stations in the preset buttons. FM1 and FM2 let you
store six stations each.
A.SEL function scans and stores up to six AM
stations and twelve FM stations with a strong signal
in the preset buttons.
If you do not like the stations auto select has
stored, you can store other frequencies in the preset
buttons manually.
Radio Data System (RDS)
The display shows up to 31 characters of text data.
Press and hold the TITLE button to see additional
characters.
indicates that the text data continues.
The display goes back to the previous screen if you
press and hold the button again.

145
Features
Audio System Basic Operation
Playing the XM
® Radio
Playing the XM
® Radio
Continued
TITLE Button
Press and release to cycle the
display between the name,
title, and category.
CATEGORY Bar
Press either side to display and
select an XM
® Radio category.
SCAN Button
Press to sample all channels (in the channel
mode), or channels within a category (in the
category mode).
Each sampling continues for a few seconds.
Press SCAN again to cancel scanning and
continue listening to the channel.
VOL /
Knob
Press to turn the audio system ON and OFF.
Turn to adjust the volume.
Preset Buttons (1-6)
To store the channel:
1. Select the channel.
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select
XM, then press the preset button.
SKIP Bar
Press to skip to the previous or next
channel.
MENU Button
Press to display the menu items.
Selector Knob
Turn to select channels.
(XM
®) Button
Press to select XM
® Radio.

146Features
Audio System Basic Operation
Playing the XM
® Radio
To Play the XM
® Radio
1. Press the
button to select the XM
® radio band (XM1 or XM2).
2. Press and hold the TITLE button to switch between the channel mode and
category mode.
If you press the MENU button, rotate
to select MODE/CATEGORY or
MODE CHANNEL. Each time you press
, the mode switches between them.
Press the
button to enter the setting.
3. Select a channel using the TUNE (
), SKIP, CATEGORY, SCAN, or Preset buttons.
To Select a Channel from a List
1. Press
to display a channel list.
2. Rotate
to select a channel, then press
.
Channel list is shown.
Playing the XM
® Radio
In the channel mode, all available channels are
selectable. In the category mode, you can select
a channel within a category (Jazz, Rock, Classical,
etc.).
You can store twelve XM
® stations in the preset
buttons. XM1 and XM2 let you store six stations
each.
There may be instances when XM
® Radio does
not broadcast all the data fields (artist name, title).
This does not indicate a problem with your audio
system.

Audio Remote Controls
160Features
MODE Button
Cycles through the audio modes as follows:
FM1
FM2
AM
XM1
XM2
CD
AUX
VOL Button
Press
: Increases the volume
Press : Decreases the volume
CH Button
When listening to radio t
Press +
: Selects the next preset radio station.
Press -: Selects the previous preset radio station
When listening to a CD, USB flash drive or iPod t
®, or Bluetooth
® audio
Press
+
: Skips to the next song.
Press -: Goes back to the beginning of the current or previous song. Allows you to operate the audio system while driving.
Audio Remote Controls
The CD mode appears only when a CD is loaded.
When in the AUX mode, the following are
operable from the remote controls:
iPod t
®/USB flash drive connected to the USB
adapter cable
Bluetooth
t
® audio (with some phones only)
MODE Button
VOL (Volume) Button
CH (Channel) Button

177
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
System Setup
This command group allows you to change or customize HFL basic settings.
To set a four-digit passcode to lock the HFL system for security
1. Say "System Setup."
2. Say "Security."
3. Follow the HFL prompts and say the four-digit number of your choice.
4. Follow the HFL prompts and confirm the number. To change the security passcode
1. Say "System Setup."
2. Say "Change Passcode" after the prompts.
3. Say the new four-digit passcode after the HFL prompts.
4. Follow the HFL prompts. To select a ring tone or a prompt as the incoming call notification
1. Say "System Setup."
2. Say "Call Notification" after the prompts.
3. Say "Ring Tone" or "Prompt" after the prompts. For no audible notification, say
"O f f."
System SetupPress the
button before a command.
Once a passcode is set, you are required to enter
the passcode with every new key cycle to use HFL.
If you forget the code, go to your dealer to have the
passcode reset. You can also cancel the
passcode by clearing all the data stored in the HFL
system.
To clear the system


P. 17 8
The default setting of the incoming notification is a
ring tone.

206Driving
When Driving
TPMS (Tire Pressure Monitoring System)
TPMS (Tire Pressure Monitoring System)Monitors the tire pressure while you are driving. If your vehicle's tire pressure
becomes significantly low, the low tire pressure/ TPMS indicator comes on and a
message appears on the multi-information display.
TPMS (Tire Pressure Monitoring System)
Conditions such as low ambient temperature and
altitude change directly affect tire pressure and
can trigger the low tire pressure/ TPMS indicator to
come on.
If the Low Tire Pressure/TPMS Indicator

Comes On or Blinks P. 2 9 3
To select the tire pressure monitor, turn
the ignition switch to ON
II
and press the
(information) button until you see
the tire pressure screen.
If all the tire pressures are normal, "TIRE
PRESSURE OK" will be displayed.
Tire Pressure Monitor
To display the pressure of all four tires, press
the SEL /RESET button.
The pressure for each tire is displayed in PSI
(U.S.) or kPa (Canada).
Tire Pressure Monitor
The pressure displayed on the multi-information
display can be slightly different from the actual
pressure as measured by a gauge. If there is a
significant difference between the two values, or
if the low tire pressure/ TPMS indicator and the
message on the multi-information display do not go
off after you have inflated the tire to the specified
pressure, have the system checked by a dealer.
"SYSTEM FUNCTION ERROR" may appear if you
drive with the compact spare tire, or there is a
problem with the TPMS.

207
Driving
When Driving
TPMS (Tire Pressure Monitoring System)
If any tire has low pressure, "LOW TIRE
PRESSURE" is displayed on the multi-
information display. Check the pressure of
each tire by pressing the
SEL /RESET
button."CHECK TIRE PRESSURE" is displayed when a
tire has significantly low pressure. The specific
tire is displayed on the screen.
TPMS (Tire Pressure Monitoring System)
Tire pressure checked and inflated in:
Warm weather can become under-inflated in tcolder weather.
Cool weather can become over-inflated in warmer tweather.
The low tire pressure/ TPMS indicator will not come
on as a result of over inflation.