2011 Acura TSX reset

Gauges and Multi-Information Display
Multi-Information Display
81Instrument Panel
Customization flow
METER SETUP
MEMORY POSITION LINK
*
AUTO DOOR LOCKDOOR LOCK MODE
KEYLESS LOCK ACKNOWLEDGMENT
SECURIT Y RELOCK TIMERAUTO DOOR UNLOCK
INTERIOR LIGHT DIMMING TIMEHEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITYLANGUAGE SELECTION
ADJUST OUTSIDE TEMP. DISPLAY
TRIP A RESET with REFUEL
ELAPSED TIME RESET
POSITION SETUPLIGHTING SETUPDOOR SETUP
EXIT
SEL /RESETSEL /RESET
SEL /RESETSEL /RESETSEL /RESETSEL /RESET
Press and hold the
button.
CHG SETTINGDEFAULT ALL
EXIT
Continued
* Not available on all models

Gauges and Multi-Information Display
Multi-Information Display
82Instrument Panel
List of customizable optionsSetup Group Customizable Features Description Selectable settings
Meter SetupLanguage Selection Changes the displayed language. English
*1, French, Spanish
Adjust Outside Temp.
DisplayAdjusts the temperature reading by a few degrees.-5°F ~ ±0°F
*1 ~ +5°F (U.S)
-3°C ~ ±0°C*1 ~ +3°C (Canada)
Trip A Reset with RefuelSets Trip A and the average fuel economy
to reset when you refuel.ON, OFF
*1
Elapsed Time Reset Changes the resetting conditions of the elapsed time. IGN OFF
*1
, Trip A, Trip B
Position Setup Memory Position Link
*
Changes the driver's seat position to a
stored setting.ON
*1, OFF
Lighting SetupInterior Light Dimming TimeChanges the length of time the interior lights stay on
after you close the doors.60 sec, 30 sec
*1, 15 sec
Headlight Auto Off TimerChanges the length of time the exterior
lights stay on after you close the driver's
door.60 sec, 30 sec, 15 sec
*1, 0 sec
Auto Light Sensitivity Changes the timing for the headlights to come on. Max, High, Mid
*1, Low, Min
*1:
Default Setting
* Not available on all models

Gauges and Multi-Information Display
Multi-Information Display
84Instrument Panel
Example for customization settings
The steps for changing the "TRIP A RESET with REFUEL" setting to ON are shown
below. The default setting for "TRIP A RESET with REFUEL" is OFF.
1. Press and hold
button until "CHG
SET TING" appears on the display.
2. Press the SEL /RESET button to go into the
"ME TER SE TUP" group.
3. Press the SEL /RESET button again.
"LANGUAGE SELECTION" appears first
in the display.

Gauges and Multi-Information Display
Multi-Information Display
85Instrument Panel
4. Press the
button until "TRIP
A RESET with REFUEL" appears on the
display, then press the SEL /RESET button.
The display switches to the
"Customization setup" screen, where
you can select "ON," "OFF, or" "EXIT."
5. Press the
button and select
"ON," then press the SEL /RESET button.
The "ON" setup screen appears,
then the display returns to the
"Customization menu" screen.
6. Press the
button until "EXIT"
appears in the display, then press the SEL /
RESET button.
7. Repeat Step 6 until you return to the
normal screen.

Setting the Clock
88Controls
Clock
Clock
You can switch the clock display between 24 hours
and 12 hours when in the menu mode.
Selector Knob Icon details
Rotate
to select.
Press
to enter.
To set the time to the nearest hour:
Press and hold the CLOCK button until the clock
display begins to blink, then press the
3 (Reset)
button.
Depending on the displayed time, the clock sets
forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
Models with navigation system The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Models without navigation system You can adjust the time in the clock display, using the CLOCK button.
Adjusting the Time
1. Press the MENU button.
2. Rotate
to select CLOCK ADJUST in the
display.
3. Press
. CLOCK ADJUST appears.
4. Rotate
to select the item you want to
adjust (12/24 hour mode, hour, minute).
Then press
.
5. Rotate
to make the adjustment.
6. Press
to enter your selection. The
display returns to CLOCK ADJUST. Repeat
steps 4 to 6 to adjust other items.
7. To enter the selection, Rotate
and
select SET, then press
.
8. Press the MENU button to go back to the
normal display.
12/24
Hour Mode
Minute
Setting
Hour Setting
Menu Button

89
Locking and Unlocking the Doors
Continued
Controls
Key Types and Functions
All of the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
Immobilizer System


P. 9 8
The keys contain precision electronics.
Adhere to the following advice to prevent damage
to the electronics:
Do not leave the keys in direct sunlight, or in
tlocations with high temperature or high humidity.
Do not drop the keys or set heavy objects on tthem.
Keep the keys away from liquids. tDo not take the keys apart except for replacing tthe battery.
If the circuits in the keys are damaged, the engine
may not start, and the remote transmitter may not
work.
If the keys do not work properly, have them
inspected by a dealer.
If the key is not fully extended, the immobilizer
system may not work properly, and the engine may
not start.
Avoid contact with the key whenever it extends or
retracts.
Use the keys to start and stop the engine,
and to lock and unlock all the doors, trunk,
and fuel fill door. You can also use the
remote transmitter to lock and unlock the
doors, trunk, and fuel fill door. Models with a driving position system The seat automatically moves to the preset
position when you unlock the door using the
remote transmitter on the master key.
Driving Position Memory System

P.111
The master key folds up inside the remote
transmitter.
1. Press the release button to release the key
out from the transmitter.
Make sure to fully extend the key.
2. To close the key, press the release button
then push the key inside the transmitter
until you hear a click.
Key Types and FunctionsThis vehicle comes with the following keys:
Retractable Master KeysPanic Button
Lock
ButtonUnlock
Button Trunk Button
Release
ButtonRelease
ButtonPress

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
111
Continued
Controls
Driving Position Memory System
Using the multi-information display, you can disable
the automatic seat adjustment function.
Customization Procedure


P. 8 0
You can cancel the driving position memory link
and customized settings. Press and hold the LOCK
and UNLOCK buttons at the same time. The LED in
the remote transmitter blinks twice and the default
settings are restored.
To turn the memory position link settings back on,
repeat this procedure. The LED will blink once.
Driving Position Memory System
*
You can store two driver's seat positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, the seat
adjusts automatically to one of the two preset positions.
The multi-information display shows you which remote transmitter you used to
unlock the vehicle when you enter.
Driver 1 transmitter is linked to memory button 1. t
Driver 2 transmitter is linked to memory button 2. t
* Not available on all models
Driver 1 Driver 2

Audio System
Auxiliary Input Jack
140Features
Auxiliary Input JackUse the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.

The audio system automatically switches
to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.
You cannot use the auxiliary input jack if you
replace the audio system.
Audio System Theft ProtectionThe audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Entering the audio security code
"ENTER CODE" appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial
number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.