Page 3 of 324
2Quick Reference Guide
Visual Index
System Indicators
P.64
Gauges
P.75
Multi-Information Display
P.76
Navigation System
*
See Navigation System Manual
Audio System
P.138
Climate Control System
P.133
Hazard Warning Button Rear Window Defogger/
Heated Mirror Button
P.110
(Vehicle Stability Assist (VSA
®)
System OFF) Button
P.205
Ignition Switch
P.104
Steering Wheel Adjustments
P.113
Seat Heater Switches
P.132
Page 11 of 324
10Quick Reference Guide
Trunk ReleaseSelector
Switch
Adjustment SwitchIndicator
Main Switch
Window
Switch
Steering Wheel
P.113
To adjust, pull the adjustment lever
towards you, adjust to the desired position,
then lock the lever back in place.Tr u n k
P.95
Push the trunk release on the driver's
door, or on the remote transmitter.
With the doors unlocked, press the trunk
release switch on the trunk lid to open it.
Door Mirrors
P.114
With the ignition switch in ON
, move
the selector switch to L or R.
Push the appropriate edge of the
adjustment switch to adjust the mirror. Place the selector switch in the R
position to use the reverse tilt door
mirror feature.
Power Windows
P.100
With the ignition switch in ON
, open
and close the power windows.
If the main switch is in the OFF position,
each passenger's window can be opened
and closed with its own switch. If the main switch is in the ON position
(indicator is on), each passenger's window
switch is disabled.
Page 109 of 324

Operating the Switches Around the Steering Wheel
Wipers and Washers
108Controls
Wipers and Washers
The windshield wipers and washers can be
used when the ignition switch is in ON
II
.
MIST
The wipers run at high speed until you
release the lever. Wiper switch (OFF, INT, LO, HI)
Change the wiper switch setting according to
the amount of rain. Adjusting the delay
Turn the adjustment ring to adjust the wiper
delay.
Windshield Wipers and Washers NOTICE Do not use the wipers when the windshield is dry.
The windshield will get scratched, or the rubber
blades will get damaged. NOTICE In cold weather, the blades may freeze to the
windshield, becoming stuck.
Operating the wipers in this condition may
damage the wipers. Use the defroster to warm the
windshield, then turn the wipers on.
If the vehicle speeds up while the wipers are
operating intermittently, the length of the wipe
interval shortens. When the vehicle starts moving,
the wipers make a single sweep.
The wiper operation of the shortest delay setting
(
) and the LO setting become the same when the
vehicle speeds up.
Turn the washers off if no washer fluid comes out.
The pump may get damaged.
Long delayShort delay
Washer
Sprays while you pull the lever toward you.
When you release the lever, the wipers make
two or three more sweeps before stopping.
MIST OFF INT: Low speed with
intermittent LO: Low speed wipe HI: High speed wipe Intermittent Time
Adjustment RingPull
to use
washer.
Page 112 of 324

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
111
Continued
Controls
Driving Position Memory System
Using the multi-information display, you can disable
the automatic seat adjustment function.
Customization Procedure
P. 8 0
You can cancel the driving position memory link
and customized settings. Press and hold the LOCK
and UNLOCK buttons at the same time. The LED in
the remote transmitter blinks twice and the default
settings are restored.
To turn the memory position link settings back on,
repeat this procedure. The LED will blink once.
Driving Position Memory System
*
You can store two driver's seat positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, the seat
adjusts automatically to one of the two preset positions.
The multi-information display shows you which remote transmitter you used to
unlock the vehicle when you enter.
Driver 1 transmitter is linked to memory button 1. t
Driver 2 transmitter is linked to memory button 2. t
* Not available on all models
Driver 1 Driver 2
Page 114 of 324

Operating the Switches Around the Steering Wheel
Adjusting the Steering Wheel
113
Controls
Adjusting the Steering WheelThe steering wheel height and distance from your body can be adjusted so that
you can comfortably grip the steering wheel in an appropriate driving posture.
1. Pull the steering wheel adjustment lever
up.
The steering wheel adjustment lever is
under the steering column.
2. Move the steering wheel up or down, and
in or out. Make sure you can see the instrument
panel gauges and indicators.
3. Push the steering wheel adjustment
lever down to lock the steering wheel in
position. After adjusting the position, make sure
you have securely locked the steering
wheel in place by trying to move it up,
down, in, and out.
Adjusting the Steering Wheel
Make any steering wheel adjustments before you
start driving.
WARNING
Adjusting the steering wheel position
while driving may cause you to lose
control of the vehicle and be seriously
injured in a crash.
Adjust the steering wheel only when the
vehicle is stopped.
To lock
Lever To a d j u s t
Page 117 of 324