2011 Acura TL display

ÛÝRef er to the table on the f ollowing
pages about the settings you want to
customize.
If you want to change any vehicle
control settings, select Keyless
Memory Settings by pressing
either INFO button ( / ), then
press the SEL/RESET button. Select
CHG SETTING, then press the
SEL/RESET button.
If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
CONT INUED
On models without keyless access system
Multi-Inf ormation Display
Inst rument s and Cont rols
93
DRIVER’S ID
Press the SEL/RESET
button.
U.S. model is shown.
TM
10/07/29 11:51:50 31TK4620_098
2011 TL

ÎÎ
ÎÎÎ
Î
Î
Î
Î
µ™¶ ™
µ™¶ ™
Î
Î LOW
MIN
OFF
LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP COMPUTER TRIP A
INFO RESET
ADJUST ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START GUIDANCE
SCREENS
MEMORY POSIT ION LINK
MET ER SET UP
(P.99)
POSITION SETUP
(P.108) 100
101
102
104
105
106
109
ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
WITH REFUEL
MANUAL ONLY
IGN OFF
HIGH
MID
LOW
MAX
HIGH
MID
ON
OFF
ON
OFF
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Changes the indicator alarm volumes into three
levels.
Changes the interior light sensitivity to your liking.
Changes the display of the keyless start guidance
screens.
Changes the driver’s seat and the outside mirror
positions to a stored setting.
1:
2: Default setting
Only on models with keyless access system
Menu Item
Group Setup Page
Setting Option
Description
2 1
111
1
1
1
1
Multi-Inf ormation Display
94
10/07/29 11:51:56 31TK4620_099
2011 TL

Î
Î
Î
Î
Î
Î
Î
Î
Î
Description
Setting Option
Menu Item
CONT INUED
Group Setup Page
Changes which doors unlock when you use the
remote or grab the driver’s door handle.
Causes some exterior lights to blink when you
unlock/lock the doors by grabbing or touching the
sensor/pushing the button on the driver’s door
handle.
Causes the beeper to sound when you unlock/lock
the doors by grabbing or touching the sensor/
pushing the button on the driver’s door handle.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.15 sec
0sec
LOW
MIN
DRIVER DOOR
ALL DOORS
ON
OFF
ON
OFF
60 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
DOOR UNLOCK MODE
KEYLESS ACCESS LIGHT
FLASH
KEYLESS ACCESS BEEP
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
KEYLESS ACCESS
SETUP
(P.111)
LIGHTING SETUP
(P.116)
112
113
114
117
118
119
1:
2: Default setting
Only on models with keyless access system1
1
1
1
1
1
2
Multi-Inf ormation Display
Inst rument s and Cont rols
95
10/07/29 11:52:03 31TK4620_100
2011 TL

Î
Î Î
Î
Î
Î
Î
Î
Î
Page
Description
Menu Item
Group Setup Setting Option
122
123
125
126
127
129
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
Changes which doors unlock with the remote
transmitter/keyless access remote on the first
push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
DOOR/WINDOW
SETUP
(P.121)
DEFAULT ALL
(P.129) SHIFT FROM P (A/T only)
WIT H VEHICLE SPEED
OFF
SHIFT TO P/DRIVER
DOOR (A/T only)
SHIFT TO P/ALL DOORS
(A/T only)
IGN OFF/DRIVER DOOR
IGN OFF/ALL DOORS
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
CANCEL
SET
Default setting
1:
2:
3: Default setting for automatic transmission
Default setting for manual transmission1
2 3
1
1
1
Multi-Inf ormation Display
96
10/07/29 11:52:09 31TK4620_101
2011 TL

ÛÝÛ
Ý
ÛÝ
Î
Î
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize: METER SETUP
When you want to change the
vehicle control settings, press the
INFO ( / ) button to select CHG
SETTING, then press the SEL/
RESET button. Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO( / )buttonuntilyousee
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
DOOR/WINDOW SETUP LIGHTING SETUP
If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on page .
POSITION SETUP
KEYLESS ACCESS SETUP
: Only on models with keyless
access system 129
CONT INUED
Customize Settings
Multi-Inf ormation Display
Inst rument s and Cont rols
97
10/07/29 11:52:18 31TK4620_102
2011 TL

ÛÝ
Î
Î
Multi-Inf ormation Display
98
: Press the SEL/RESET button. : Press the INFO button ( / ).
: On models with keyless access system only
DEFAULT ALL
See page 129.
METER SETUP
See page 99.POSITION
SETUP
See page
108. LIGHTING
SETUP
See page
116.DOOR/WINDOW
SETUP
See page
121.
KEYLESS
ACCESS SETUP
See page
111.
10/07/29 11:52:23 31TK4620_103
2011 TL

ÛÝ
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP COMPUTER TRIP A INFO
RESET
ADJUST ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
Here are the five or six custom
settings for the meter setup:
KEYLESS START GUIDANCE
SCREENS
CONT INUED
On models with keyless accesssystem
Meter Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
99
: Press the SEL/RESET button. : Press the INFO button ( / ).
See page
106.
See page
105.
Seepage104
.
See page
102.
See page
101.
See page
100.
On models with keyless access system only
10/07/29 11:52:32 31TK4620_104
2011 TL

ÛÝ
ÛÝ
Û
Ý
ÛÝ
Press the SEL/RESET button to see
the selections.
Select the desired language by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
There are three language selections
you can make: English, French, and
Spanish. To choose the language you
want, f ollow these instructions:
You can choose this item to
customize f rom ‘‘METER SETUP’’
by pressing the INFO ( / ) button
repeatedly.
While ‘‘METER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Language Selection
Multi-Inf ormation Display
100
10/07/29 11:52:40 31TK4620_105
2011 TL