Page 34 of 224

1
i
INSTRUMENTS and CONTROLS
32
   
 
 
 
 
 
 
 
 
 
 
 
Total distance recorder 
 
System which measures the total dis-
tance travelled by the vehicle during its 
life. 
   
 
 
 
 
 
 
 
 
Lighting dimmer 
 
Permits manual adjustment of the bright-
ness of the instruments and controls to 
suit the ambient light level. Only operates 
when the vehicle lighting is on, with the 
exception of the daytime running lamps. 
  The total and trip distances are dis-
played for thirty seconds when the ig-
nition is switched off, when the driver's 
door is opened and when the vehicle is 
locked or unlocked. 
   
Trip distance recorder 
 
System which measures a distance 
travelled during a day or other period 
since it was reset to zero by the driver. 
   
Activation 
   
 
 ) 
 Press the button to change the 
brightness of the instruments and 
controls. 
   
 ) 
  When the lighting reaches the mini-
mum setting, release the button, 
then press again to increase it.  
  or 
   
 
 ) 
  When the lighting reaches the maxi-
mum setting, release the button, 
then press again to reduce it. 
   
 ) 
  When the lighting reaches the level 
of brightness required, release the 
button.  
 
   
Deactivation 
  When the vehicle lighting is off, or in 
day mode on vehicles fi tted with day-
time running lamps, pressing the button 
does not have any effect.  
     
 
 ) 
  With the ignition on, press the but-
ton until zeros appear.  
 
   
To conform to legislation in the 
country you are crossing, change 
the units of distance (miles or km) 
via the confi guration menu.  
  
     
        
        Page 55 of 224

2
!
!
COMFORT
  No person or object must prevent 
the seat runner from returning to 
its initial position; return to this po-
sition is necessary for the seat to 
lock in place.      
4. Access to rear seats 
   
 
 ) 
  Pull the lever to fold the seat back 
and move the seat forwards.  
  On repositioning, the seat returns to 
its initial position.     
5. Head restraint height adjustment 
   
 
 ) 
  To raise the head restraint, pull it up-
wards. 
   
 ) 
  To remove the head restraint, press 
the lug  A 
 and pull the head restraint 
upwards. 
   
 ) 
  To put the head restraint back in po-
sition, locate the stems of the head 
restraint in the holes, taking care to 
keep them in line with the seat back. 
   
 ) 
  To lower the head restraint, press 
the lug  A 
 and the head restraint at 
the same time.    The head restraint has a frame with 
a notch which prevents the head 
restraint from lowering; this is a 
safety device which provides pro-
tection in the event of an impact. 
   
The adjustment is correct when 
the upper edge of the head re-
straint is level with the top of the 
head. 
 
  Never drive with the head restraints 
removed; they must be in place and 
correctly adjusted.  
  
     
        
        Page 56 of 224
2
!!
COMFORT
54
REAR SEATS
  Fixed two-seat bench fi tted with roll-
over bars to ensure your protection 
should the vehicle roll over. 
   
Following an accident, have the roll-
over bars checked by a PEUGEOT 
dealer.  
STEERING WHEEL ADJUSTMENT
 
 
 
 
 ) 
  When stationary 
, pull the con-
trol lever to release the adjustment 
mechanism. 
   
 ) 
  Adjust the height and reach to suit 
your driving position. 
   
 ) 
  Push the control lever to lock the ad-
justment mechanism.  
  As a safety precaution, these op-
erations should only be carried out 
while the vehicle is stationary.   
     
        
        Page 57 of 224