2010 YAMAHA RHINO 700 tire size

2-21
Aftermarket tires and rims
The tires and rims that came with your Rhino were
designed to match the performance capabilities
and to provide the best combination of handling,
braking, and comfort. Other tires, rims, sizes, and
combinations may not be appropriate. Refer to
pages 8-105–8-111 for tire specifications and
more information on replacing your tires.
EE.book Page 21 Monday, January 19, 2009 5:30 PM

8-107
Tire replacement
Always use the same size and type of tires recom-
mended in this owner’s manual. The tires that
came with your Rhino were designed to match the
performance capabilities and to provide the best
combination of handling, braking, and comfort. It is
best to replace all four tires at the same time. If that
is not possible, you must replace the tires in pairs
(front or rear) with tires of the same size and type
as the originals. Never replace just one tire.
WARNING
Installing improper tires on your Rhino can af-
fect handling and stability. This can cause a
loss of control.The tires listed below have been approved by
Yamaha Motor Manufacturing Corporation of
America for this model.
Manufacturer Size Type
Front MAXXIS 26 × 9-14NHS MU05
Rear MAXXIS 26 × 11-14NHS MU06
EE.book Page 107 Monday, January 19, 2009 5:30 PM

10-5
Transmission:
Primary reduction system V-belt
Secondary reduction system Shaft drive
Secondary reduction ratio 46/22 × 24/18 × 41/9 (12.700)
Transmission type V-belt automatic
Operation Right hand operation
Reverse gear 23/14 × 28/23 (2.000)
Sub transmission ratio low 35/17 (2.059)
high 38/26 (1.462)
Chassis:
Frame type Steel tube frame
Caster angle 3.9°
Trail 20.0 mm (0.79 in)
Tire:
Ty p e Tu b e l e s s
Size front 26
× 9-14NHS
rear 26 × 11-14NHS
Wheel:
Type Panel wheel
Rim size front 14 × 6.5AT
rear 14 × 8.0AT Model YXR7F4PZ
EE.book Page 5 Monday, January 19, 2009 5:30 PM