2010 TOYOTA PRIUS disp switch

183
2-2. Instrument cluster
2
When driving
PRIUS_U (OM47668U) U.S.A.
MPH or km/h button
The speed units can be selected MPH or km/h. Press the button to switch the
display between MPH and km/h.
ITO22P107

189
2-2. Instrument cluster
2
When driving
PRIUS_U (OM47668U) U.S.A.
Switching the display
“TRIP” button
“DISP” button
On vehicles with touch tracer dis-
play, the steering switches opera-
tion status is displayed on the
instrument cluster for confirma-
tion purposes. (P. 182)
●Dynamic radar cruise control display (if equipped) ( P. 218)
Automatically displayed when using dynamic radar cruise control.
● Lane-keeping assist display (if equipped) ( P. 235)
Automatically displayed when using lane-keeping assist.
● Warning messages ( P. 508)
Automatically displayed when a malfunction occurs in one of the vehi-
cle’s systems.

194 2-2. Instrument cluster
PRIUS_U (OM47668U) U.S.A.
*1: The images are examples only, and may vary slightly from actual condi-tions.
*2: The gasoline engine will automatically stop and restart under various conditions.
5-minute/1-minute interval fuel consumption display
The fuel consumption display shows the average fuel consumption
and the regenerated energy amount in 5-minute or 1-minute inter-
vals.
■ Switching between 5-minut e and 1-minute intervals
Press and hold the “DISP” switch
while either the 5-minute interval
or 1-minute interval display is
being shown.
The display will alternate with
each press of the button.
Multi-information display*1Eco Driving Indicator Light
Power area: 
Shows that an environ-
mentally friendly driv-
ing range is being
exceeded (during full
power driving etc.). Off

198 2-2. Instrument cluster
PRIUS_U (OM47668U) U.S.A.■
Resetting the best consumption
Press and hold the “TRIP” switch
while the fuel consumption his-
tory is displayed.
A confirmation message will be
displayed.
Press and hold the “TRIP” switch again.
The best consumption will be reset. 
To cancel the reset operation, press the “DISP” switch.
Odometer/trip meter/distance to empty
The display changes as follows
each time the “TRIP” button is
pressed.
Odometer  Trip meter A* 
Trip meter B
*  Distance to
empty  Off
*: Pushing and holding the “TRIP” button will reset the trip meter.
STEP1
STEP2

200 2-2. Instrument cluster
PRIUS_U (OM47668U) U.S.A.
Setting up the displaysPress the “DISP” switch unt il the “SETTINGS” screen
appears.
While the vehicle is stopped,
press and hold the “DISP” switch
until the screen changes.
■ Switching the Eco Driving Indi cator Light/steering switch
operation display on/off
Select “ECO” or “STEERING
SWITCH” on the screen by
pressing the “DISP” switch.
Press and hold the “DISP” switch
to enter the setting mode.
Select “ON” or “OFF” by press-
ing the “DISP” switch.
Press and hold the “DISP” switch
to finish setting.
STEP1
STEP2
STEP1
STEP2

201
2-2. Instrument cluster
2
When driving
PRIUS_U (OM47668U) U.S.A.
■
Selecting 12h/24h clock display
Select “CLOCK” by pressing the
“DISP” switch.
Press and hold the “DISP” switch
to enter the setting mode.
Select “12h” or “24h” by pressing
the “DISP” switch.
Press and hold the “DISP” switch
to finish setting.
■Setting the clock
Adjust hours.
Adjust minutes.
Round the nearest hour.
*
*
: e.g. 1:00 to 1:29 1:00 
1:30 to 1:59 2:00
STEP1
STEP2

202 2-2. Instrument cluster
PRIUS_U (OM47668U) U.S.A.■
Selecting the language
Select “LANGUAGE” on the
screen by pressing the “DISP”
switch.
Press and hold the “DISP” switch
to enter the setting mode.
Select the language you want to
read by pressing the “DISP”
switch.
Press and hold the “DISP” switch
to set the language.
STEP1
STEP2

203
2-2. Instrument cluster
2
When driving
PRIUS_U (OM47668U) U.S.A.
■
Turning off the multi-information display
Select “SCREEN OFF” on the
screen by pressing the “DISP”
switch.
Press and hold the “DISP” switch
to enter the setting mode.
Select “OFF” on the screen by
pressing the “DISP” switch.
Press and hold the “DISP” switch
to turn off the multi-information
display.
To re-display the multi-information
display, press the “DISP” switch
to display the “SETTINGS”
screen and follow the same pro-
cedure, selecting “ON” instead of
“OFF”.
STEP1
STEP2