Page 141 of 264
OTHER FUNCTIONS
145
4. Touch the desired telephone num-
ber.
5. Touch the touch screen button you
want to register in.
The latest dialed number is registered in
the 6th item (speed redial).
6. If you select a touch screen button
you registered before, this screen is
displayed.
Touch “Yes” if you want to overwrite it.
Deleting the speed dial individually
You can delete “01” “17” of the speed
dial individually.
If you delete them all at once, all of 17 num-
bers are deleted.
1. Touch “Delete” of “Speed Dial”.
2. Touch the touch screen button you
want to delete.
3. Touch “Yes”.
Page 145 of 264
OTHER FUNCTIONS
149
Deleting all the speed tone
1. Touch
“Delete All” of “Speed Tone”.
2. Touch “Yes”. (iii) Setting the volume
1. Touch
“Volume” to display the “Vol-
ume Settings” screen.
2. Touch “ ” or “+” to adjust the “V oice
Volume” or “Ring Volume”.
“Voice Volume” Adjusting the other
. . . . . .
party’s voice.
“Ring Volume” Adjusting the ring . . . . . . .
volume.
Page 147 of 264
OTHER FUNCTIONS
151
(iv) Setting the screen
1. Touch “Screen” to display the
“Screen Settings” screen.
2. Do the detail settings of the screen
and touch “OK”.
Receiving Call Display
You can select the method of the receiv-
ing call display.
Touch “Full” or “Icon”.
“Full mode” When a call is received, the
. . . . . .
Hands−free screen is displayed
and you can operate it on the
screen.
“Icon mode” The message is displayed on the
. . . . . .
upper side of the screen. You can
only operate the steering switch.
Page 148 of 264
OTHER FUNCTIONS
152
Auto answer
When a call is received, the display au-
tomatically changes to the talking
screen and you can start to talk on the
phone (without touching any switch) af-
ter the preset time.
Touch “ON” of “Auto Answer” and “ ”
or “+” to adjust the waiting time of auto
answer within 1 60 seconds.
The Bluetooth connection status at
startup
Vehicles with smart key system —
When the “ENGINE START STOP”
switch is in ACCESSORY or IGNITION
ON mode and the Bluetooth is auto-
matically connected, the connection
check is displayed.
Vehicles without smart key system —
When the engine switch is in “ACC” or
“ON” position and the Bluetooth is au-
tomatically connected, the connection
check is displayed.
Touch “ON” or “OFF” of “Show
Bluetooth∗ connection status at start
up”.
∗: Bluetooth is a registered trademark of Bluetooth SIG. Inc.
Page 149 of 264
OTHER FUNCTIONS
153
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”. (v) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.
Page 150 of 264
OTHER FUNCTIONS
154
Transferring a telephone number
You can transfer the telephone num-
bers in your Bluetooth phone to the
system. Up to 1000 person’s data (up to
2 numbers a person) can be registered
in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer Data” to display
“Select Group” screen.
2. Select the group you want to
transfer to.
3. Touch “Overwrite” or “Add To”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel” . If the transfer-
ring is interrupted on the way, the phone
book data transferred until then can be
memorized in the system.
5. When this screen is displayed, the
transfer is completed.
When this screen is displayed, try the
transfer operation again.
Page 151 of 264
OTHER FUNCTIONS
155
Registering the phone book data
You can register the phone book data.
1. Touch “Register” of “Phone Book”.
2. Touch the desired touch screen
button to edit the phone book.
3. When you complete the edit, touch
“OK”.
Editing the name
When you don’t input the name, the
number is displayed.
1. Touch “Name”.
2. Use the software keyboard to input
the name.
Page 152 of 264
OTHER FUNCTIONS
156
Editing the phone number
You can register the phone number in
“TEL1” and “TEL2” separately. Up to 2
numbers a person can be registered.
1. Touch “TEL1” or “TEL2”.
2. Input the number and touch “OK”.
3. Select the desired icon.
Selecting the group
You can set a group for a contact (for ex-
ample: “Family”, “Friends”, “Office”...).
It will then be easier for you to find this
contact when needed, by using the
group display.
You can select “No group” or “Group
01” to “Group 19”.
“No group” is displayed if you don’t set
the group.
1. Touch “Group”.
2. Select the desired group.
