Radio
4If you have switched off the radio by withdrawing the ignition key, the radio switches on again once the ignition is on.Audio settings– Press the rocker switch repeatedly to select the desired parameter. – Set the desired value by turning the rotary/push knob .You can select between the following parameters:•
TRE
- Treble setting;
•
BASS
- bass setting;
•
BAL
- setting of the volume ratio between the left and the right side;
•
FA D
- setting of the volume ratio between the front and the rear;
Setting the special functions– Press the rocker switch , in order to activate the menu Set-up. – Individual functions of the menu are
selected by pressing the rocker
switch or by pressing the rocker switches , .
– Set the desired value by turning the button .REG AUTO / REG OFF Certain programs of the broadcasting
companies are divided into regional
programs at specific times. That is why in individual regions the regional programs of a station can broadcast different contents. First of all the unit attempts to set only alternative frequencies of the selected station. If the quality is however so low, that there is a risk of a “program loss”, the unit also accepts “related” frequencies.
When opting for
REG AUTO
the change to a regional “related” station can only be
performed if there is a risk of losing the station. When selecting
REG OFF
, the
receiver can access the regional
“related” stations unlimited.
GALA Your radio increases automatically its volume with the increasing vehicle speed. A higher setting value results in a stronger volume increase. LO U D In case of low volume level, the function reinforces the range of bass and treble frequencies. BEEP Switching on or off the tone signal when storing the radio stations. ON VOL Your radio stores the last volume set before switching off. If the value is higher, the volume is reduced to the value of the parameter
ON VOL
after switching on the
radio again. PHONE* If your vehicle is equipped
with a handsfree system, th
e monophone play function
of the mobile phone calls is carried ou
t via the loudspeakers of the vehicle.
PDC AT* If your vehicle is equippe
d with “parking aid”, the volume is automatically
decreased to a pre-defined value, when the “parking aid” is active.•
PDC AT0
- does not restrict the volume;
•
PDC AT1
- restricts the current volume to a middle level;
•
PDC AT2
- restricts the current volume to a low level;
•
PDC AT3
- switches off the tone completely (Mute).
AUX* Setting of the input sensitivity
AUX LEV
:
•
AUX LEV 1
- high level, used in particular for notebooks;
•
AUX LEV 2
- middle level, used for cassettes or CD player;
A1
MENU
MENU
A1
s220.book Page 4 Tuesday, August 5, 2008 6:46 AM
