2010 Seat Leon 5D display

Navigation57
Selecting a point of interest from the list•Select a destination in the list by turning the setting knob ⇒page 8, fig. 1
and press to start route guidance ⇒page 13.•Alternatively: Browse the list by dragging the scroll marker on the screen
and select a destination to start route guidance ⇒page 10.•Press the function button. Press the function button in the
detailed view to start route guidance.•In the list view or detailed view, press the function button to store
the marked or displayed address in the Destination memory ⇒ page 59.Note
The distances and directions for points of interest refer to the route as the
crow flies.A10
Details
StartStore
MediaSystem2.1_EN.book Seite 57 Donnerstag, 29. April 2010 4:18 16

Navigation59
Storing destinations manuallyWhen the function button is displayed, the destination currently
shown can be stored in the destination memory.•Pressing the function button opens an input window where you can
assign an entry name ⇒fig. 57 .•If you wish to assign a name of your own, first press the function
button and then enter your own chosen name for the destination ⇒page 50.•Press to store the destination under the currently displayed name in
the Destination memory .
Editing or deleting destinatio ns in the destination memory•Open the Navigation main menu.•Press the Destination memory function button to open the list of
manually stored destinations ⇒ fig. 58.
Fig. 57 Input window for
assigning your own entry
name.
Store
Store
Delete
OK
Fig. 58 Destination
memory with manually
stored destinations.Fig. 59 Destination
window showing a desti-
nation from the destina-
tion memory.
*
MediaSystem2.1_EN.book Seite 59 Donnerstag, 29. April 2010 4:18 16

Navigation
60•Select a destination by turning the setting knob ⇒page 8, fig. 1 .•Press the function button.
The destination is opened in the destination window ⇒ page 59, fig. 59.•Pressing the function button starts route guidance to the displayed
destination.•Pressing the function button deletes the destination from the
Destination memory .•Destination items (Street, To w n / P C etc.) can be opened and edited indi-
vidually in the destination window ⇒page 53.•Press the function button to change the displayed entry name
⇒ page 50.
When destination data have been altered, the function button
changes to to allow you to store the changes.
If a flagged destination is displayed in the destination window ⇒ page 61.
Deleting the destination memory and last destinations•Press the unit button from any navigation menu to open the Navi-
gation setup menu .•Press the function button and select the destinations
to be deleted in the next menu.•Press to delete all destinations in the destination
memory
* and Last destinations
•.
•ALTERNATIVELY: press to delete all destinations in the
list of Last destinations
•.
•Alternatively: press the unit button to close the window without
making any changes.
Displaying the information window and storing a flagged destinationOpening the information window for the current vehicle position•From any navigation menu (except the Navigation setup menu ), press the
unit button to open the Details information window ⇒ fig. 60 .
If no route guidance is active, the current vehicle position is displayed in the
information window ⇒ fig. 60 .
During route guidance, the final destination is displayed in the information
window ⇒ page 63.•Turn the setting knob ⇒page 8, fig. 1 in the Details information
window to display all available information on the current vehicle position:
A10
DetailsStartDeleteName
Delete
StoreSETUPDelete destinationAll destinations
Last destinations
E
Fig. 60 Information
w i n d o w w i t h d e t a i l e d v i e w
of the current position.
º
A10
MediaSystem2.1_EN.book Seite 60 Donnerstag, 29. April 2010 4:18 16

Navigation61
Storing a flagged destination•Pressing the function button stores the displayed position as
a Flagged destination in the Destination memory
* ⇒ page 60, fig. 60.
To permanently retain the position stored as a Flagged destination, it must be
renamed in the Destination memory . Otherwise the stored position will be
overwritten the next time a flagged destination is stored.
•Select the flagged destination in the Destination memory ⇒ page 59,
fig. 58 .•Press the function button.
The flagged destination can be renamed.
Storing or editing the home addressOnly one address or position can be stored as the home address at any one
time. The stored home address can be edited or overwritten.
Display
Meaning
Position:
Vehicle position determined by means of GPS
data and navigation data
Latitude:
Latitude
Longitude:
Longitude
Height:
Height above mean sea level.
GPS status:
Display of technical GPS information
Useable satellites:
The number determines the GPS status
Flagged dtn.Details
Fig. 61 Navigation main
menu.Fig. 62 Destination
window with the home
address.
MediaSystem2.1_EN.book Seite 61 Donnerstag, 29. April 2010 4:18 16

Navigation65
Visual recommendations on the mapWhen route guidance starts, the system automatically switches to the map
view ⇒fig. 65. The red
9 symbol indicates the vehicle's position and heading
⇒fig. 65 . If
the vehicle position symbol
9 remains in the same position and the map
view freezes, it is currently not possible to determine the vehicle's position,
e.g. in a multi-storey car park.
During route guidance the navigation route is shown as a blue line. Sections
closed to traffic either manually or due to TMC messages advising of traffic
congestion ⇒page 70 are shown in colour on the calculated route.
The next road to take is displayed in the top line of the screen.
After a few seconds, the function buttons disappear from the bottom line of
the screen to display more information on the route ⇒fig. 66.
•Briefly press the bottom-right or bottom-left area of the screen to display
the function buttons again ⇒ fig. 65.•Pressing the unit button switches between the Navigation main
menu and the map view.
When the function buttons are hidden, the current street and information
about the journey length are displayed on the bottom line of the screen
⇒ fig. 66 .: Remaining distance to the destination.: Expected time of arrival or travelling time ⇒page 73.
Shortly before you reach a turning point, a turning arrow appears, indicating
the direction to turn. The distance to the turning point is also displayed below
it.
Changing the map scale (Autozoom)
The “Autozoom” function is enabled for the map view by default. This means
that the map view automatically zooms in and out: Small scale on motorways.
Large scale in urban areas.•Turn the setting knob ⇒page 8, fig. 1 to manually change the scale
of the map for a few seconds. Turn the knob clockwise to zoom in. Turn the
knob anticlockwise to zoom out.
Fig. 65 Map view during
route guidance with the
function buttons
displayed.Fig. 66 Map view during
route guidance.
NAV
A10
MediaSystem2.1_EN.book Seite 65 Donnerstag, 29. April 2010 4:18 16

Navigation
66•To permanently retain the manually selected map scale, “Autozoom”
must be deactivated in the Navigation setup menu ⇒ page 73.
Selecting the map view mode
The map view mode can be changed.•In the map, briefly press the bottom-right or bottom-left area of the screen
to display the function buttons again.•Press the function button ⇒page 65, fig. 65 .•Select one of the playback modes displayed in the pop-up window.
: two dimensions, map oriented to North.
: two dimension, map oriented to vehicle heading.
: three dimensions, birds-eye view of map.
Alternatively, it is possible to switch between the three map views by pressing
on the compass shown on the map.
During route guidance, the calculated route can also be shown on an over-
view map.•Press in the pop-up window to display current position and
destination.
The scale of the overview map cannot be changed.•Press the function button to return to the last shown map view.
Displaying speed limits
If there is a speed limit stored in the navigation data for the road along which
you are travelling, this will be displayed on the map. During route guidance,
the arrow indicating a change of direction takes precedence over the speed
limit display.
Please remember that the navigation data may not be up-to-date and that the
system has limitations ⇒ page 47! The speed limit display is activated in the navigation system settings
⇒
page 73.
Points of interest on map
Depending on the programmed settings, points of interest (petrol stations,
car parks, Authorised Services) will be displayed as symbols on the map
⇒ page 73.
Note
If you miss a turning during route guidance and are currently unable to turn
back, keep on driving until the navigation system offers a new route.
Note
T he q ua lit y o f the i nst ru cti ons g ive n by th e uni t will d e pe nd o n th e navi gat io n
data used.
Note
In addition, the route is optimised with the TMC traffic news received
⇒page 70. The radio stations broadcasting this information are responsible
for the content and the quality of the TMC traffic reports.
Extras
2D North2D Heading3D Heading
Overview map
Back
MediaSystem2.1_EN.book Seite 66 Donnerstag, 29. April 2010 4:18 16

Navigation67
Stopping and resuming route guidanceActive route guidance can be stopped and later resumed from the new vehicle
position at any time. Stopping route guidance
•In the
map view , briefly press the bottom-right or bottom-left area of the
screen to display the function buttons.•Press the function button ⇒fig. 67 .•ALTERNATIVELY: Switch to the main menu Navigation and press the
function button.
Resume route guidance to the last destination•In the map view , pressing the function button always automatically
resumes route guidance to the last destination ⇒fig. 68 .Entering a stopover destinationIt is possible to enter one additional destination as a stopover destination
while route guidance is in progress. You will then always be guided to the
stopover destination first before route guidance continues to the final desti-
nation. The final destination is always the destination to which route guid-
Fig. 67 Stopping route
guidance.Fig. 68 Route guidance
interrupted.
Stop
Stop
Start
Fig. 69 Information
window showing a stop-
over destination during
route guidance.
MediaSystem2.1_EN.book Seite 67 Donnerstag, 29. April 2010 4:18 16

Navigation
68ance is first started. To enter a final destination and stopover destination,
please note the required steps.•To enter a stopover destination, first select a final destination and start
route guidance ⇒page 52.•Press the unit button.•In the Navigation main menu, select an additional destination, following
the same procedure as for selection of a final destination.•When you start route guidance to the additional destination, a pop-up
window opens.•Press the function button to be guided to the newly entered
destination as a stopover destination, before continuing to the final destina-
tion.•Alternatively: press the function button to cancel the
current route guidance and start a new route guidance to the newly entered
destination only.
To view the stopover destination in the information window ⇒page 67,
fig. 69 , press the ⇒page 8, fig. 1 unit button.
An announcement is given when you reach the stopover destination. After a
few seconds, route guidance is resumed to the final destination. You may
then enter another stopover destination.
If the function button is selected during route guidance to a stopover
destination ⇒page 67, you have the option of deleting the stopover
destination.
Display the information window and the list with the routeInformation window during route guidance•Press the unit button from any navigation menu (except SETUP) to open
the information window ⇒ page 58.
During route guidance, the final destination is displayed in the information
window . If a stopover destination has also been entered, this is displayed
above the final destination ⇒page 67, fig. 69.
Inserting the route list
During route guidance, a route list can be inserted via the information
window .•In the information window , press the function button.•Press the function button in the pop-up window.•The route list for the active route guidance will be calculated and
displayed ⇒fig. 70 .
NAVStopover
New destination
º
A7
Stop
Fig. 70 Route list during
route guidance.
º
Route
Route list
MediaSystem2.1_EN.book Seite 68 Donnerstag, 29. April 2010 4:18 16