2010 Seat Alhambra Owner's Manual

If and when 352
Manually unlocking the gear selection lever
If the vehicle power supply should ever fail (discharged battery, etc.) and the
vehicle has to be pushed or towed, the selector lever must first be moved to
position N using the manual release mechanism.The emergency release mechanism is located underneath the gearbox cover
panel to the right-hand side. To release the gear selector lever mechanism, a
suitable tool is required, for example a screwdriver.
Preparations
xApply the parking brake. If the parking brake cannot be activated in the
vehicle must be secured otherwise so that it cannot move.
xSwitch the ignition off.
To remove the gearbox cover panel
xPull the cover up around the dust guard on the gear selector lever
Ÿfig. 204.
xTake the cover off by passing it over the gear selector lever Ÿ.
Manual release of selector lever
xPress the release lever Ÿfig. 205 in the direction of the arrow and hold it
in this position.
xPress the lock button Ÿfig. 204 on the gear selector lever knob and
place the gear selector lever in the N position.
WARNING
Never move the gear selector lever from the position P while the electronic
parking brake is deactivated. Otherwise, the vehicle may accidentally
move off on hills or steep slopes causing serious accidents.
Caution
If the vehicle is moved on its wheels with the engine stopped and the selector
lever in position N for a prolonged period of time and at high speed, for
example for towing, then the automatic gearbox will be damaged.
Fig. 204 Remove the
lining from the area of the
gear indication.
Fig. 205 Manual release
of gear selector lever.
A1

If and when353
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
To o l s *
Introduction
When securing the vehicle in case of a breakdown, please note the legal
requirements for each country.
Additional information and warnings:
xWorking in the engine compartment Ÿpage 304
xChange wheel Ÿpage 339
xIn case of emergency Ÿpage 345
WARNING
Loose objects in the passenger compartment can be violently fired through
the compartment in case of a sudden manoeuvre or braking and especially
in accidents causing serious injury.
xMake sure that the vehicle tools are stored safely in the luggage
compartment.
WARNING
Unsuitable or damaged on-board tools can cause injury or accidents.
xNever work with inappropriate or damaged tools.
Location
Depending on the model, the vehicle tools may be kept in the luggage
compartment, in a cavity close to the lock carrier Ÿfig. 206. Loosen the
safety straps and remove the on-board tools. For vehicles factory-fitted with
winter tyres, you will find additional tools in a toolbox located in the luggage
compartment.
Note
After use, return the jack to its initial position using the handle in order to
securely store it in the vehicle.
Fig. 206 In the luggage
compartment, viewed
from inside the vehicle:
On-board tools are
located in a cavity close to
the lock carrier.

If and when 354
Components
The set of on-board tools depends on the vehicle equipment. The following is
a description for a vehicle with all options.
The individual elements of the on-board toolkit Ÿfig. 207
Adapter for antitheft bolt. SEAT recommend you carry the wheel bolt
adapter in the vehicle tool kit at all times. The code number of the anti-
theft wheel bolt is stamped on the front of the adapter. In case it is lost,
another adapter can be ordered using this number. Note the antitheft
bolt code for the wheels and keep it in a place other than the vehicle.
Towing eye, removable.
Wheel spanner.
Jack. Fold the jack before returning it to the toolkit.
Jack. Before storing the jack in the toolkit, fold its hook.
Screwdriver with hexagon socket in the handle for screwing and
unscrewing the wheel bolts once loosened. The screwdriver bit is inter-changeable. The screwdriver may be found underneath the wheel
spanner.
Wire hook for pulling off the wheel cover, integral hubcaps and the wheel
bolt caps.
Foldable wedges*
The foldable wedges are with the on-board tools Ÿfig. 207.
Assembling the foldable wedges
xLift the base plate Ÿfig. 208 .
xInsert the two “tabs” of the base plate into its openings.
Improper use
The foldable wedges are used to block the wheel diagonally opposite to the
wheel being changed.
Fig. 207 Components of
the onboard tool kit.
A1
A2
A3
A4
A5
A6
A7
Fig. 208 To unfold the
foldable wedges.
A1

If and when355
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a The foldable wedges are placed in front of and behind the wheel and must be
used on firm ground.
WARNING
Incorrect assembly and use of the foldable wedges can cause injury and
accidents.
xNever use damaged foldable wedges.
xDo not use the foldable wedges hold the vehicle on hills or slopes.

If and when 356
Fuses
Introduction
Due to the constant update of vehicles, fuse assignments depending on
equipment and the use of the same fuse for various electrical components, at
the time of printing this manual it is not possible to provide an up-to-date
summary of the electrical components fuse positions. For detailed informa-
tion about the fuse positions, please consult a qualified workshop.
In general, a fuse can be assigned to various electrical components. Like-
wise, an electrical component can be protected by several fuses.
Only replace fuses when the cause of the problem has been solved. If a newly
inserted fuse blows after a short time, you must have the electrical system
checked by a qualified dealership as soon as possible.
Additional information and warnings:
xWorking in the engine compartment Ÿpage 304
WARNING
The high voltages in the electrical system can give serious electrical
shocks, causing burns and even death!
xNever touch the electrical wiring of the ignition system.
xTake care not to cause short circuits in the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or bridging a current circuit without
fuses can cause a fire and serious injury.
xNever use a fuse with a higher value. Only replace fuses with a fuse of
the same amperage (same colour and markings) and size.
xNever repair a fuse.
xNever replace a fuse by a metal strip, staple or similar.
Caution
xTo avoid damage to the vehicles electric system, before replacing a fuse
turn off the ignition, the lights and all electrical elements and remove the
keys from the ignition.
xIf you replace a fuse with higher-rating fuse, you could cause damage to
another part of the electrical system.
xProtect the fuse boxes when open to avoid the entry of dust or humidity.
Dirt and humidity inside fuse boxes can cause damage to the electrical
system.
Note
One single consumer could have more than one fuse.
Note
Several consumers could run over one single fuse.
WARNING (continued)

If and when357
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Vehicle fuses
Only replace fuses with a fuse of the same amperage (same colour and mark-
ings) and size.Identifying fuses by colours
To open the dashboard fuse box
xReach behind the cover with your hand Ÿfig. 209 and pull forwards.
To open the engine compartment fuse box
xOpen the bonnet ’ Ÿpage 304.
xMove the attachment tabs forwards, in the direction indicated by the
arrow to release the fuse box cover Ÿfig. 210.
xThen lift the cover out.
xTo fit the cover, place it on the fuse box. Push the attachment tabs back,
in the opposite direction indicated by the arrow until they click audibly into
place.
In is possible that there are more fuses behind a cover in the lower left-hand
side of the luggage compartment.
Fig. 209 On the driver-
side dashboard: fuse box
cover.
Fig. 210 In the engine
compartment: fuse box
cover.
ColourAmp rating
purple3
light brown5
Brown7,5
Red10
Blue15
Yellow20
White or transparent25
Green30
orange40

If and when 358
Caution
xAlways carefully remove the fuse box covers and refit them correctly to
avoid problems with your vehicle.
xProtect the fuse boxes when open to avoid the entry of dust or humidity.
Dirt and humidity inside fuse boxes can cause damage to the electrical
system.
Note
In the vehicle, there are more fuses than those indicated in this chapter.
These should only be changed by a specialist workshop.
Replacing a blown fusePreparation
xSwitch off the ignition, lights and all electrical equipment.
xOpen the corresponding fuse box Ÿpage 357
Identifying a blown fuse
A fuse is blown if its metal strip is ruptured Ÿfig. 211.
Point a lamp at the fuse. This will make it easier to see if the fuse is blown.
To replace a fuse
xIf necessary, remove the plastic pincers from the fuse box cover.
xFor small fuses, insert the pincers from above Ÿfig. 212 .
xFor larger fuses, insert the pincers from one side of the fuse Ÿfig. 212
.
xRemove the relevant fuse.
xReplace the blown fuse by one with an identical amperage rating (same
colour and markings) and identical size Ÿ.
xReplace the cover.
Fig. 211 Image of a
blown fuse.
Fig. 212 Removing or
fitting a fuse.
AA
AB

If and when359
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Caution
If you replace a fuse with higher-rating fuse, you could cause damage to
another part of the electrical system.