2010 Seat Alhambra ECU

Child safety 48
passenger seat to the size of the child seat and the height of the child. Ensure
the passenger is in the correct position ’ Ÿpage 10.
Move the second and third row of seats fully back and lock them. Place the
seat backs in a vertical position and fold the armrests down.
ISOFIX child seats approved for rear seats
The rear seats are suitable for child seats with the ISOFIX system specially
designed for this type of vehicle in accordance with regulation ECE-R 44.
ISOFIX child seats are divided into “specific categories for the vehicle”,
“limited” or “semi-universal”.
Child seat manufacturers supply a list of vehicles with each ISOFIX seat,
which includes the models for which the ISOFIX child seat in question is
approved. If the vehicle is included in the manufacturer's list and the ISOFIX
child seat belongs to a seat category included in the list, then it can be used
in your vehicle. If necessary, contact the child seat manufacturer for an
updated list of vehicles.
WARNING
If child seats are fitted to all the seats in the second row then it is possible
that the seats of this row cannot be folded down from the third row of seats
in case of an accident. In case of an emergency, passengers in the third row
of seats will not be able to leave the vehicle or to help themselves.
xChild seats should not occupy all the seats of the second row if other
passengers are to occupy the third row of seats.
Securing child seats with the seat belt
Securing the child seat using the seat belt
xPlease read and observe the child seat manufacturer's handling instruc-
tions.
xPositioning the child seat on the seat according to the manufacturer's
instructions.
xThe seat belt height adjustment must be as high as possible.
Group (weight
category)ISOFIX child seat
categorySeat position on the
rear seats
Group 0: chil-
dren up to 10 kgEIUFa)
Group 0+: chil-
dren up to 13 kg
EIUFa)
DIUFa)
CIUFa)
Group 1: 9 to 18
kg
DIUFa)
CIUFa)
BIUFa)
B1IUFa)
AIUFa)
a)IUF: suitable for “universal” ISOFIX child seats authorised for use in this group.
Group (weight
category)ISOFIX child seat
categorySeat position on the
rear seats

Child safety49
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
xFasten the seat belt or pass it around the child seat structure in the
manner described in the manufacturer's instructions.
xMake sure the seat belt is not twisted.
xInsert the latch plate into the buckle for the appropriate seat and push it
down until it is securely locked with an audible click.
xEnsure that the upper belt web lies tightly on the child seat.
xPull the belt (it must be no longer possible to pull the lower belt webbing
out).
Removing the child seat
The seat belt must not be unfastened until the vehicle has come to a standstill
Ÿ.
xPress the red button on the buckle. The latch plate is released from the
buckle.
xGuide the belt back by hand so that it rolls up easily and the trim will not
be damaged.
xRemove the child seat from the vehicle.
WARNING
Unbuckling the seat belt while the vehicle is in motion can cause severe or
fatal injuries in the event of an accident or sudden braking.
xThe seat belt must not be unfastened until the vehicle has come to a
standstill.
Securing the child seat using the lower anchor points
(ISOFIX, LATCH*)
Fig. 27 Version 1: identi-
fication of the anchor
points for the child seat
on the vehicle seat.
Fig. 28 Version 2: identi-
fication of the anchor
points for the child seat
on the vehicle seat.

Child safety 50
There are two retaining rings, the so-called lower anchor points, on each rear
seat or, where applicable, on the front passenger seat. The retaining rings are
attached to the seat frames.
Child seats with rigid mounting
xObserve the manufacturer's instructions when installing and removing
the child seat Ÿ.
xPress the child seat onto the retaining rings Ÿpage 49, fig. 27 or
Ÿpage 49, fig. 28 in the direction of the arrow. The child seat must be safely
engaged and click audibly into place.
xPull on both sides of the child seat to ensure that it is secure.
Child seat with adjustable retaining straps
xObserve the manufacturer's instructions when installing and removing
the child seat Ÿ.
xPlace the child seat on the seat cushion and attach the retaining strap
hooks to the retaining rings Ÿpage 49, fig. 27 or Ÿpage 49, fig. 28.
xTighten the straps evenly using the corresponding adjustment device.
The child seat must sit flush against the vehicle seat.
xPull on both sides of the child seat to ensure that it is secure.
WARNING
The lower anchor points for child seats do not include rings. Only secure
booster seats to lower anchor points.
Securing a child seat using a Top Tether retaining strap
xObserve the manufacturer's instructions when installing and removing
the child seat Ÿ.
xRaise the head restraint behind the child seat until it engages.
xSecure the child seat to the lower anchor points Ÿpage 49.
xPull the upper child seat retaining strap back to the backrest of the rear
seat, below or on both sides of the head restraint (depending on the child
seat model).
xHook the upper retaining strap to the corresponding retaining ring (for
TOP TETHER) on the back of the backrest on the rear seat Ÿfig. 29.
xPush the head restraint down as far as it will go. Ensure that it does not
interfere with the seatbelt from the upper attachment.
xTighten the strap so that the top of the child seat rests on the backrest.
Fig. 29 Upper retaining
strap hooked in the
luggage compartment

Child safety51
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
WARNING
Child seats with lower anchor points and with an upper retaining strap
must be installed in line with the manufacturer's instructions. Failure to
comply could result in severe injuries.
xAlways secure just one retaining strap from a child seat to a retaining
ring (for TOP TETHER) on backrest on the rear seat in the luggage compart-
ment.
xNever secure a child seat to the retaining rings.
xNever secure a child seat to the movable attachment elements for vehi-
cles with an attachment element and rail system.

Child safety 52
Integrated child seat
Introduction
The integrated child seat is only suitable for children in Group 2 (15-25 kg)
and Group 3 (22-36 kg), according to the ECE-R 44 regulation.
Additional information and warnings:
xSeat belts Ÿpage 22
WARNING
Child travelling without their seat belt fastened or not secured using a suit-
able restraint system may sustain fatal injuries if the airbag is deployed.
xYou should always transport all children up to 12 years of age on the
rear seat.
xAlways disable the front passenger airbag if, in exceptional cases, you
have no alternative but to transport a child in a rear-facing child safety seat
on the front passenger seat.
xChildren must always be protected with a child restraint system suited
to their height and weight.
xAlways fasten children's seat belts correctly.
WARNING
Children must travel in a child seat appropriate to their weight and height
while the vehicle is in motion.
xChildren must always be protected with a child restraint system suited
to their height and weight.
xChildren must assume the proper sitting position and be properly
belted in while travelling.
xThe shoulder part of the seat belt must lie approximately on the centre
of the shoulder, never across the neck or the arm.
xThe seat belt must lie close to the upper part of the body.
xThe lap belt part must lie across the pelvis, not across the stomach, and
always fit closely.
xAllow the belt to retract until it fits tightly over the child's seat.
xNever hold children or babies on your lap.
xAlways use a child seat and the seat belt for children who are less than
1.5 metres tall. The normal seat belt could cause injuries to the abdominal
and neck areas.
xOnly one child may occupy a child seat.
xRead and follow the information and warnings provided by the child
seat manufacturer.
xNever leave an unsupervised child alone on a child seat or in the
vehicle.
xAll modifications to the integrated child seat must be carried out by a
specialist workshop.
xReplace the child seat or any seat components damaged or involved in
an accident.
WARNING
Loose objects could fly uncontrollably around the vehicle interior and
cause injuries in the event of an accident or sudden braking.
xDo not leave toys or other hard, loose objects on the child seat or on the
seat while the vehicle is in motion.
WARNING (continued)

Child safety55
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a Seat belt guide handle
xSecure the seat belt guide handle to the side head restraint on the
window side. The guide handle is secured by a button.
xOpen the upper button on the seat belt guide handle and pass the belt
webbing below the side head restraint and through the guide handle.
xClose the button again.
Adjusting the belt routing
xGuide the automatic three-point seat belt below the side head restraint.
xPull the latch plate and slowly place the belt webbing across the child's
chest and lap.
xInsert the latch plate into the buckle for the appropriate seat and push it
down until it is securely locked with an audible click.
xPull the belt to ensure that the latch plate is securely engaged in the
buckle.
WARNING
The seat belt only offers maximum protection from severe or fatal injuries
when it is correctly positioned.
xChildren must assume the proper sitting position and be properly
belted in while travelling.
xThe shoulder belt must be positioned against the middle of the
shoulder.
xThe seat belt must lie flat and fit comfortably.
xAllow the belt to retract until it fits tightly over the child's seat.
xThe lap part of the seat belt must lie across the pelvis, never across the
stomach.
xOnly one child may occupy a child seat.
Removing the seat belt
Lowering the cushion
xPull the unlock lever Ÿfig. 34 on the cushion in the direction of the
arrow .
xPush the cushion down through the central area in the direction of the
arrow until it safely engages Ÿ. The side supports fold away automat-
ically.
Removing the side head restraint
xOpen the seat belt guide handle.
xGuide the seat belt by hand to pull the belt back in more easily and not
damage the trim.
xPush the head restraint up as far as it will go.
xFold the backrest of the rear seat forwards Ÿpage 137.
xRemove the head restraint along with the side head restraint.
xRemove the head restraint and side head restraint by pulling on it.
xFitting the head restraint.
Fig. 34 Integrated child
seats. lowering the
cushion.
AAA1
ABA2

Unlocking and locking85
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a Attention: Depending on the selected function in the central locking
submenu Convenience, you may push the button twice Ÿpage 70 to
unlock all doors and the tailgate.
The vehicle key only locks and unlocks the vehicle if it is within range of the
vehicle and if the batteries have enough power. When locking, the vehicle's
indicators will blink.
If the driver's door is open, the vehicle cannot be locked with the key. If you
unlock the vehicle without opening any doors or the tailgate, it will lock again
automatically after a few seconds. This function prevents the vehicle from
remaining unlocked if the unlocking button is pressed by mistake.
Convenience open/close function
xSee "Electric windows: functions" Ÿpage 102.
xSee "Panorama sliding sunroof: operation" Ÿpage 106.
Locking and unlocking the vehicle from the inside
The central locking button is still operative when the ignition is switched off.
The central locking button is only deactivated if the "Safe" security system is
activated Ÿpage 88.
Please note the following when you use the central locking button to lock your
vehicle:
xDo not turn on the "Safe" security system Ÿpage 88.
xDo not turn on the antitheft alarm.
xIt will not be possible to open the doors or the tailgate from the outside
this may offer extra safety, when stopped at traffic lights for example.
FunctionHandling the buttons on the vehicle
Unlocking the vehicle.Press button . Keep it pushed for the
convenience opening.
Lock the vehicle.Press button . Keep it pushed for the
convenience locking function.
Unlocking the tailgate.Press button .
Open the sliding door.Ÿpage 92.
0
1
˜
0
Push the button Ÿfig. 48:
Unlocking the vehicle.
Lock the vehicle.
Fig. 48 In the driver door:
central locking button.
0
1

Unlocking and locking87
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a When unlocking the vehicle, all of the indicators blink twice; when locking,
they blink once.
If you unlock the vehicle without opening any doors or the tailgate, it will lock
again automatically after a few seconds.
Unlocking and opening the doors
xTake the handle of the corresponding door and touched the outside
button.
xDoor open.
Closing and locking the doors
xClose the driver's door.
xPress on the outermost button of the passenger or driver's side door
(Ÿpage 86, fig. 50 arrow) once. The vehicle locks with the "Safe" security
system Ÿpage 88. The door being operated must be closed.
xOperate the outermost button on the driver's or passenger door handle
twice to lock the vehicle without the "Safe" security system.
Locking and unlocking the tailgate
If the vehicle key is within the tailgate approach zone (Ÿpage 86, fig. 49)
this will be automatically unlocked when opened.
xOpen and close the tailgate normally Ÿpage 97.
The tailgate locks automatically after it is closed when there is no vehicle key
inside the vehicle.
Locking using the second vehicle key
If there is a key inside the vehicle, this can only be locked from the outside if
a second is key is detected in the approach zone outside the vehicle.
Automatically turning off sensors
When the vehicle is not locked or unlocked for a long period of time then the
approach sensors for the passenger door and rear doors are turned off auto-
matically.When the outside button of the door handle is repeatedly pressed while the
vehicle is locked, for example due to contact with the branches of a tree, all
of the exterior buttons on the side of the vehicle affected will be turned off for
30 minutes. If the only button affected is the driver's door button, only this
button is turned off.
The sensors are turned on again:
xAfter 30 minutes.
xALTERNATIVELY: The vehicle is unlocked using the remote control on
the key.
xALTERNATIVELY: The tailgate is opened.
Convenience functions
xFor convenience locking of all electric windows and the panorama sliding
sunroof, press and hold the button on the outside door handle for more than
two seconds.
xRelease the button to interrupt the function. Pushing the button immedi-
ately after releasing it will open all of the electric windows (safety function)
’ Ÿpage 102.
When a door is opened using the door handle, all of the settings activated in
the menu Configuration – Convenience Ÿpage 70 will be applied.
Caution
A strong jet of steam or water can activate a proximity sensor if a valid vehicle
key is within the approach zone. If at least one of the electric windows is open
and the sensor is triggered several times, convenience locking will begin. If
the jet of steam or water is stopped briefly and then directed at one of the
sensors again, it is possible that all of the windows will open Ÿpage 87,
“Convenience functions”.
0