2010 Seat Alhambra lights

Cockpit71
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
„Default setting
„Vehicle condition Ÿpage 73
„Configuration Ÿpage 75
„Multifunction display data
„Journey duration
„Current fuel consumption
„Average fuel consumption
„Distance covered
„Distance to empty (the distance you can travel with the remaining
fuel)
„Average speed
„Digital display of speed
„Speed warning
„Compass
„Convenience Ÿpage 76
„Open door
„Manual
„automatic mode
„Childproof locks On / Off
„Anti-theft alarm confirmation On / Off
„Handling windows
„Off
„All
„Driver
„Mirror adjustment On / Off
„Rear-view mirror adjustment
„Synchronised
„Individual
„Default setting
„Lights & visibility Ÿpage 77
„Coming Home
„Leaving Home
„Footwell light
„Convenience indicators On / Off
„Default setting
„Time
„Winter tyres
„Settings: Language
„Units
„Second speed display On / Off
„Autohold
„Travel mode On / Off
„Service
„Info
„Reset
„Default setting

Cockpit75
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Configuration Menu
Configuration
MenuFunction
Multifunction
display dataConfiguration of the multifunction display data which you
wish to see on the instrument panel display Ÿpage 73.
CompassChanging the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
ConvenienceChanging vehicle convenience functions Ÿpage 76.
Lights &
visibilityConfiguration of vehicle lighting Ÿpage 77.
TimeChanging the hours and minutes of the clock and the nav-
igation system. The time can be set here and the choice
can be made between the 24 hour and 12 hour display.
The S in the upper part of the display indicates that the
clock is set to summer time.
Winter tyresChanging the visual and audible speed warnings. This
function should only be used when the vehicle is fitted
with winter tyres, which are not designed for travel at
high speeds.
Settings:
LanguageChanging the language of the display texts and the navi-
gation system.
UnitsChanging the units of measurement for the temperature,
consumption and distance.
Second speedSwitching second speed display on and off
AutoholdSelecting whether the Auto-Hold function should remain
on permanently.
Travel modeChanging the headlamps for countries in which vehicles
are driven on the other side of the road. When the “mark”
is activated, the headlamps of a left-hand drive vehicle
are adjusted for driving on the left. The travel mode can
only be used for short periods of time.
ServiceCheck the service notifications or reset the service inter-
vals to zero
Manufacturer's
settings Some functions of the Configuration menu will be reset
to the factory value.
BackThe main menu is displayed again.
Configuration
MenuFunction

Cockpit77
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Lights & visibility submenu.
Personal convenience settings
When two people use a vehicle, SEAT recommends that each person always
uses “their” own remote control key. When the ignition is switched off, or the
vehicle is locked, the personal convenience settings are stored and automat-
ically allocated to the vehicle key Ÿpage 70.The values of the personalised convenience settings of the following menu
options are allocated to the vehicle key:
„Parking heating menu
„Configuration Menu
„Time
„Settings: Language
„Units
„Convenience settings menu
„Door unlock (individual opening, Auto Lock)
„Convenience handling of windows
„Rear-view mirror adjustment
„Lights & visibility adjustment menu.
„Coming home and leaving home
„Footwell light
„Convenience indicators
The stored settings are automatically activated, at the latest when the igni-
tion is switched on. Please refer to the information and tips relating to the
seat memory Ÿpage 137.
Lights &
visibility menu.Function
Coming HomeThis permits the adjustment of the time the headlamps
stay on after locking or unlocking the vehicle, the function
can also be connected or disconnected hereŸpage 119.
Leaving Home
Footwell lightThis permits the adjustment of the brightness of the foot-
well lighting when the doors are open, the function can
also be connected or disconnected here
Convenience
indicatorsSwitching convenience indicators on and off When the
convenience indicators are connected, when the indicator
is switched on, these flash at least three times
Ÿpage 113.
Manufacturer's
settingsAll the configurations in the submenu Lights & visibil. are
reset to the predefined factory values.
BackThe Configuration menu is displayed again.

Unlocking and locking85
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a Attention: Depending on the selected function in the central locking
submenu Convenience, you may push the button twice Ÿpage 70 to
unlock all doors and the tailgate.
The vehicle key only locks and unlocks the vehicle if it is within range of the
vehicle and if the batteries have enough power. When locking, the vehicle's
indicators will blink.
If the driver's door is open, the vehicle cannot be locked with the key. If you
unlock the vehicle without opening any doors or the tailgate, it will lock again
automatically after a few seconds. This function prevents the vehicle from
remaining unlocked if the unlocking button is pressed by mistake.
Convenience open/close function
xSee "Electric windows: functions" Ÿpage 102.
xSee "Panorama sliding sunroof: operation" Ÿpage 106.
Locking and unlocking the vehicle from the inside
The central locking button is still operative when the ignition is switched off.
The central locking button is only deactivated if the "Safe" security system is
activated Ÿpage 88.
Please note the following when you use the central locking button to lock your
vehicle:
xDo not turn on the "Safe" security system Ÿpage 88.
xDo not turn on the antitheft alarm.
xIt will not be possible to open the doors or the tailgate from the outside
this may offer extra safety, when stopped at traffic lights for example.
FunctionHandling the buttons on the vehicle
Unlocking the vehicle.Press button . Keep it pushed for the
convenience opening.
Lock the vehicle.Press button . Keep it pushed for the
convenience locking function.
Unlocking the tailgate.Press button .
Open the sliding door.Ÿpage 92.
0
1
˜
0
Push the button Ÿfig. 48:
Unlocking the vehicle.
Lock the vehicle.
Fig. 48 In the driver door:
central locking button.
0
1

Unlocking and locking 92
Doors
Introduction
Additional information and warnings:
xVehicle key set Ÿpage 78
xCentral locking and locking system Ÿpage 83
xEmergency locking and unlocking Ÿpage 348
WARNING
If a door is not correctly closed, it could open unexpectedly when driving
and cause serious injuries.
xAlways stop immediately and close the door.
xWhen closing, ensure that the door has closed correctly. A closed door
should be flush with the corresponding parts of the bodywork.
xOpen and close doors only when nobody is in the way of the door.
WARNING
A door held open by its retainer could be blown closed by the wind or close
if the vehicle is on a hill causing injury.
xWhen opening and closing doors, always use the door handle.
Warning indicator
Several warning and control lamps should light up for a few seconds when
the ignition is switched. This signals that the lamp is working properly. They
will switch off after a few seconds.
If a door is open or incorrectly closed, the indicator
 or o on the instrument
panel will light.
Depending on the vehicle equipment, a symbol may be displayed on the
instrument panel screen instead of the warning lamp. The indication is also
visible when the ignition is switched off. The indication disappears around 15
seconds after the vehicle has been locked.
Sliding doors
Introduction
Additional information:
xVehicle key set Ÿpage 78
xCentral locking and locking system Ÿpage 83
xEmergency locking and unlocking Ÿpage 348
lights upPossible causeSolution
oAt least one vehicle door is
open or not correctly shut.› Stop driving immediately!
Open the corresponding door
and close it immediately.

Unlocking and locking97
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Ta i l g a t e
Introduction
Additional information and warnings:
xCentral locking Ÿpage 83
xTransporting Ÿpage 13
xEmergency locking and unlocking Ÿpage 348
WARNING
Careless and unsuitable locking, opening and closing of the tailgate can
cause accidents and serious injury.
xOpen and close the tailgate only when nobody is in the way.
xDo not close the tailgate by pushing it down with your hand on the rear
window. The rear window could break and cause injury.
xEnsure the tailgate is locked after closing, otherwise, it may open unex-
pectedly while driving. A closed tailgate should be flush with the corre-
sponding parts of the bodywork.
xAlways keep the tailgate closed while driving to avoid toxic gases
entering the passenger compartment.
xDo not open the tailgate when there is a load carrier installed. Likewise,
the tailgate cannot be opened when a load is attached to it, for example
bicycles. An open tailgate could close itself if there is an additional weight
on it. If necessary, press down on the tailgate and remove the load.
xClose and lock both the tailgate and all the other doors when you are
not using the vehicle. Ensure that nobody remains inside the vehicle.
xNever allow children to play inside or around the vehicle without super-
vision, especially if the tailgate is open. Children could enter the luggage
compartment, close the tailgate and become trapped. Depending on the
time of the year, temperatures inside a locked and closed vehicle can be extremely high or extremely low resulting in serious injuries and illness or
even death, particularly for young children.
xNever leave children or disabled people alone in the vehicle. If the
vehicle key or the central locking button is used, they may be locked in the
vehicle.
Caution
Before opening the tailgate, ensure that there is sufficient free space to open
and close it, for example if you are towing a trailer or in a garage.
Warning indicator
Several warning and control lamps should light up for a few seconds when
the ignition is switched. This signals that the lamp is working properly. They
will switch off after a few seconds.
A warning appears on the instrument panel
˜ if the tailgate is open or not
properly closed.
Depending on the vehicle equipment, a symbol may be displayed on the
instrument panel screen instead of the warning lamp. The indication is also
visible when the ignition is switched off. The indication disappears around 15
seconds after the vehicle has been locked.
lights upPossible causeSolution
˜The tailgate is open or not
correctly shut.› Stop driving immediately!
Open the tailgate and close it
again.
WARNING (continued)

Unlocking and locking 100
Opening the tailgate electronically
Opening the tailgate
xPress and hold the button on the vehicle key until the tailgate opens
automatically.
xALTERNATIVELY: Press and hold the button on the centre console for
approximately 1 second Ÿpage 98, fig. 56.
xALTERNATIVELY: Press the Ÿpage 98, fig. 57 tailgate button (arrow).
In case of difficulty or obstruction, automatic opening of the tailgate is inter-
rupted.
Electronically opening the tailgate does not work when a trailer is electrically
connected and hitched to a factory fitted trailer hitch Ÿpage 260.
The tailgate can be opened manually by applying more force.
Closing the tailgate
xPress and hold the button on the vehicle key for approximately 1
second.
xALTERNATIVELY: Press and hold the button on the centre console for
approximately 1 second Ÿpage 98, fig. 56.
xALTERNATIVELY: Press the Ÿpage 98, fig. 57 tailgate button (arrow).
xPress the button on the open tailgate Ÿfig. 59 Ÿ.
xManually push the tailgate down to close it.
The tailgate will move down to the closed position to close and lock itself
automatically using the power-close feature Ÿ.
In case of difficulty or obstruction, automatic closing of the tailgate is inter-
rupted and it will open slightly.
Check why the tailgate could not close.
Attempt to close it once more.
Interrupting the opening and closing process
Tailgate opening and closing can be stopped by pressing one of the
buttons. Each time one of the buttons is pressed, the tailgate moves to
its initial position.
Then, it can be opened or closed by hand. To do this, apply a little more force.
Memorising the opening angle
The tailgate must be at least half open to memorise an opening angle.
xStop automatic opening in the opening position required Ÿpage 100.
xHold down the button Ÿfig. 59 with the tailgate open for at least three
seconds. The opening angle is memorised.
Memorisation is confirmed by blinking of the hazard lights and a sound
signal.
To be opened completely, the opening angle must be memorised once more.
xRelease the tailgate and open it to the memorised height.
xPush the tailgate all the way up. To do this, apply a little more force.
Fig. 59 Button with tail-
gate open.
˜
˜
˜
˜
˜
˜˜

Lights and visibility113
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Lights and visibility
Lights
Introduction
The legal requirements regarding the use of vehicle lights in each country
must be observed.
The driver is personally responsible for the correct use and adjustment of the
lights in all situations.
Additional information and warnings:
xSEAT information system Ÿpage 70
xChanging bulbs Ÿpage 360
WARNING
If the headlights are set too high and the main beam is not used correctly,
there is a risk of dazzling or distracting other road users. This could result
in serious accident.
xAlways make sure that the headlamps are correctly adjusted.
xNever use the main beam or flashed headlamps as this could dazzle
other drivers.