!
67
 The incorrect installation of a child  
seat in a vehicle compromises the 
child's protection in the event of an 
accident.  
 Remember to fasten the seat belts  
or  the  child  seat  harnesses   keep-
ing  the  slack    in  relation  to  the 
child's  body    to  a  minimum  ,  even 
for short journeys.  
 For optimum installation of the "for- 
ward facing" child seat, ensure that 
the back of the child seat is in con-
tact  with  the  back  of  the  vehicle's 
seat  and  that  the  head  restraint 
does not cause any discomfort.  
 If  the  head  restraint  has  to  be  re- 
moved,  ensure  that  it  is  stored  or 
attached securely to prevent it from 
being thrown around the vehicle in 
the event of sharp braking.  
 Children under the age of 10 must  
not  travel  in  the  "forward  facing" 
position  on  the  front  passenger 
seat,  unless  the  rear  seats  are  al-
ready  occupied  by  other  children, 
cannot be used or are absent.     Installing a booster seat  
 The  chest  part  of  the  seat  belt  must  
be positioned on the child's shoulder 
without touching the neck.  
 Ensure  that  the  lap  part  of  the  seat  
belt  passes  correctly  over  the  child's 
thighs.  
 PEUGEOT  recommends  the  use  of  
 a    b o o s t e r    s e a t    w h i c h    h a s    a    b a c k ,    fi   t -
ted with a seat belt guide at shoulder 
level.  
 As a safety precaution, do not leave: 
   -   one  or  more  children  alone  and 
unsupervised in a vehicle, 
  -   a  child  or  an  animal  in  a  vehicle  which is exposed to the sun, with  
the windows closed, 
  -   the  keys  within  reach  of  children  inside the vehicle.  
 To  prevent  accidental  opening  of  the 
doors, use the "Child lock".  
 Take  care  not  to  open  the  rear  win- 
dows by more than one third.  
 To  protect  young  children  from  the  
 r a y s    o f    t h e    s u n ,    fi   t    s i d e    b l i n d s    o n    t h e  
rear windows.   
       CHILD LOCK 
 On  each  rear  door,  this  prevents  open- 
ing of the door from the inside.  
 Turn control   1  an eighth turn (45 degrees) 
towards the inside of the vehicle using the  
ignition key.  
 Check  that  the  safety  lock  is  engaged  
correctly. The control  1  should no longer 
be in the vertical position.