2010 OPEL COMBO windows

Contents
In Brief ........................................................ 2
Keys, doors, windows ............................. 20
Seats, Interior .......................................... 38
Instruments ............................................. 66
Lighting ................................................... 84
Infotainment system .............................. 90
Climate control ....................................... 92
Driving and operation ......................... 100
Self-help, vehicle care .......................... 128
Opel Service, maintenance .................. 164
Technical data ..................................... 182
Index ...................................................... 198

14 In Brief
Picture no: 14057h.tif
Rear window wiper
3 and
Rear window washer system
3
operation Rear window wipers and rear window
washer system 382, Further information
3179, 3180.
Picture no: 11549s.tif
Heated rear window
3, heated
exterior mirrors
3
Operated with the Ü button.
Climate control system 392, Heated rear
window 337.
Picture no: 13205s.tif
To clear fogged or icy windows Turn the rotary switches for temperature
and air flow clockwise. Set air distribution
to V. Air conditioning system 3: Also press
button n.
Climate control 3 392. Wiper on = Push stalk forwards
Wiper off = Lever toward steering wheel
Washing = Push lever forward and hold

15
In Brief
Picture no: 15120s.tif
Manual transmission Reverse gear: With the vehicle stationary,
lift the ring under the gear-lever knob
3 seconds after depressing the clutch, and
then engage the gear.
If the gear does not engage, put the lever
into neutral, release the clutch pedal and
depress again; then repeat gear selection.
Manual transmission 3105.
Picture no: 12466s.tif
Manual transmission
automated
3
To move the selector lever from N to R
press the button on the lever.
Only start in N with foot brake applied.
Manual transmission automated 3 3100.
Before starting off, check zTyre pressure and tyre condition 3121,
3191,
zEngine oil level and fluid levels in engine
compartment 3174 to 3180,
zAll windows, mirrors, exterior lighting
and number plates are free from dirt,
snow and ice and operational,
zSeats, seat belts and mirrors are
correctly adjusted 338, 348, 334,
zCheck brake function at low speed,
particularly if the brakes are wet.
N
= Idle speed/start position
o
= Drive position (centre position)
+
=Higher gear
-
= Lower gear
A/M
= Switch between Automatic and
Manual mode
R
= Reverse gear (with selector lever
lock)

17
In Brief
Parking the vehicle zAlways apply handbrake firmly without
operating the release button, and apply
as firmly as possible on a downhill or
uphill slope.
zSwitch off the engine and ignition by
turning the ignition key to 0 and
removing it. Turn the steering wheel until
you can feel its lock engage (anti-theft
protection).
On vehicles with manual transmission
automated3, control indicator R
flashes for a few seconds after the
ignition is switched off if the hand brake
has not been applied.
zIf the vehicle is parked on a level surface
or an uphill slope, with a manual
gearbox select first gear or with manual
transmission automated 3 move the
selector lever to the centre position
before switching off the ignition. Also
turn the front wheels away from the kerb
if the vehicle is on an uphill slope.
If the vehicle is on a downhill slope, with
manual gearbox or manual transmission
automated 3 select reverse gear before
switching off the ignition. Also turn the
front wheels towards the kerb. zLock the vehicle with the key in the lock
or the p button on the remote control.
Activate the anti-theft locking system 3
and anti-theft alarm system 3 by
pressing the p button twice.
Advice when parkingzDo not park vehicle on easily ignitable
surfaces as the hot exhaust system
temperatures could cause the surface to
ignite.
zClose windows.
zThe engine cooling fans may run after
the engine has been switched off, 3174.
Locking doors 322, Remote control 3 323,
Central locking system 3 324, Anti-theft
alarm system 3 331, Vehicle
decommissioning 3181.
Interesting functions

20 Keys, doors, windowsKeys, doors,
windows
Replacement keys The key number is specified in the
Car Pass3.
The key is part of the electronic
immobiliser.
Locks 322, 3162.
Picture no: 15760t.tif
Key with retractable key blade
3
Press button to extend. To retract, press
button and audibly engage key blade. Car Pass The Car Pass contains safety-related
vehicle data and should therefore be kept
in a safe place.
When the car is taken to a workshop, the
Car Pass data is needed in order to
perform certain operations. Replacement keys ............................... 20
Key with retractable key blade 3...... 20
Car Pass................................................ 20
Electronic immobiliser.......................... 21
Mechanical unlocking or locking of
individual doors................................. 22
Remote control 3................................. 23
Central locking system 3.................... 24
Fault in the remote control ................. 26
Malfunction in central locking system 26
Sliding doors 3..................................... 27
Child safety locks 3............................. 27
Tailgate 3............................................ 28
Leaf doors 3........................................ 29
Anti-theft alarm system 3.................. 31
Exterior mirrors..................................... 34
Interior mirror ....................................... 35
Manual window operation,
front doors ......................................... 35
Window in the sliding doors 3............ 36
Electric windows3............................... 36
Heated rear window 3........................ 37

21
Keys, doors, windows
Picture no: 15761t.tif
Electronic immobiliser The system checks whether the vehicle is
allowed to start with the key used. Once
the transponder in the key is recognised,
the vehicle can be started.
The electronic immobiliser activates
automatically when the key is removed
from the ignition switch.
Picture no: 11718s.tif
Control indicator for immobilizer A
Control indicator A illuminates briefly
after the ignition is switched on.
If the control indicator flashes when the
ignition is on, there is a fault in the system;
the engine cannot be started. Switch off
the ignition and then repeat the start
attempt.
If the control indicator A continues to
flash, please try to start the engine using
the second key and contact a workshop. If control indicator A lights up after the
engine has started, there is a fault in the
engine electronics or the manual
transmission automated 3104.
Note
The immobiliser does not lock the doors.
You should always lock the vehicle after
leaving it and switch on the anti-theft
alarm system 3, 322, 324, 331.

22 Keys, doors, windows
Picture no: 18115s.tif
Mechanical unlocking or locking
of individual doors(versions without remote control 3 and
central locking system 3)
Front doors and sliding doors 3
To unlockTurn key in lock towards front of vehicle as
far as it will go. Return key to the vertical
position and remove. Pull door handle.
To lockWith door or sliding door closed, turn key
towards rear of vehicle as far as it will go.
Turn key back to vertical position and
remove.
Operating from the insidePull or press the interior lock button.
Picture no: 18093s.tif
Tailgate 3
To unlockTurn key in lock to horizontal position and
remove. Press button.
To lockWith tailgate closed, turn key in lock to
vertical position and remove.
Picture no: 18095s.tif
Leaf door 3
To unlockTurn key in lock to vertical position and
remove. Pull door handle.
To lockClose first left and then right leaf door. Turn
key in lock to horizontal position and
remove.

23
Keys, doors, windows
Picture no: 15330t.tif
Remote control
3
Depending on the equipment of the
vehicle, one of the remote controls
depicted on this page will be used.
The remote control is integrated in the key.
Used to operate:
zCentral locking system 3,
zmechanical anti-theft locking system 3,
zanti-theft alarm system 3.
On vehicles with electronic windows 3, the
windows can be closed from the outside
using the remote control 337.
Picture no: 15331t.tif
The remote control has a range of approx.
5 metres. This range can be affected by
outside influences. Aim the remote control
at the vehicle to operate. The hazard
warning lamps flash to confirm remote
control operation.
Handle the remote control with care,
protect it from moisture and high
temperatures and avoid unnecessary
operation. Fault
If the central locking system cannot be
operated with the remote control, it may be
due to the following:
zRange exceeded.
zBattery voltage of the radio remote
control too low, change battery.
zFrequent, repeated operation of the
remote control outside the reception
range of the vehicle (e.g. too far from
vehicle, remote control is then no longer
recognised). Synchronise the remote
control.
zIf the central locking system is
overloaded as a result of repeated
operation at short intervals. The power
supply is cut off for a brief period.
zInterference from higher-power radio
waves from other sources.
Manual unlocking or locking with the
vehicle key 326.